• Title/Summary/Keyword: Injection Mould

Search Result 56, Processing Time 0.02 seconds

Pick-up Lens Manufacturing for Optical application using Diamond Turning Process (다이아몬드 터닝가공을 이용한 광정보저장용 픽업렌즈 제작)

  • Kim, J.H.;Kim, S.S.
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.04a
    • /
    • pp.47-51
    • /
    • 2004
  • The aspherical lens are used as objective lens of optical pickup. The sample product is made before manufacturing the injection mould of lens to examine the design factor. The optimum cutting conditions of the main spindle speed, the depth of cut, the feed rate are found when we cut PMMA and PC lens sample with ultra-precision SPDT. The demanded surface roughness 10 nm Ra, aspherical form error 0.5 ${\mu}m$ P-V for aspherical lens of optical data storage device are satisfied for PMMA, but not satisfied for PC.

  • PDF

Design and Analysis of Injection-Molded Portable Telephone-Charging Equipment Using Integrated CAE Approach (통합적 CAE 기술에 의한 휴대폰 충전기 설계 해석)

  • Oh Jung-Yeol;Huh Yong-Jeong;Li Gil-Goo
    • Proceedings of the KAIS Fall Conference
    • /
    • 2004.06a
    • /
    • pp.72-74
    • /
    • 2004
  • 본 연구의 목적은 천안시 소재 (주)삼우금형의 생산 제품인 휴대폰 충전기에 대해 CAE 프로그램인 Moldflow와 CAPA를 이용하여 유동해석과 냉각해석을 수행함으로써 성형불량을 최소화하고 좋은 설계를 얻을 수 있는 최적의 성형조건을 얻으려는 것이다. 사출성형 관련 설계를 설계초기 단계에서 CAE기술을 활용하여 합리적인 설계로 나아가기 위한 구체적인 과정을 기술하였다. 제품 성형에 있어서의 문제점을 최소화하고 재료비 절감, 설계납기 단축, 제품 품질 향상을 달성하기 위해서 CAE 해석을 통하여 현재 제품의 문제점을 도출하고 그 해결책을 제시하였다.

  • PDF

A Novel Runner Design for Flow Balance of Cavities in Multi-Cavity Injection Molding (다수 빼기 사출성형에서 캐비티간 충전균형을 위한 새로운 런너의 설계)

  • Park, Seo-Ri;Kim, Ji-Hyun;Lyu, Min-Young
    • Polymer(Korea)
    • /
    • v.33 no.6
    • /
    • pp.561-568
    • /
    • 2009
  • Small injection molded articles are generally molded by multi-cavity injection molding. The most important thing in multi-cavity molding is flow imbalance among the cavities because it affects the physical property and the quality of products. The cavity filling balance can be achieved by flow balance in the runner through the thermal balance. In this study, novel screw type runner or helical type runner has been developed for the flow balance in the runner and performed experiment and computer simulation. Flow balance has been observed using various screw type runners for several resins such as amorphous and crystalline polymers including low and high viscosities grades. Flow balance experiments have been performed for various injection speeds since the flow balance can be affected by injection speed among the injection conditions. Experimental results have been compared with computational results and they showed good agreement. The cavity filling balance can be achieved by the screw runner where the temperature distribution is uniform through the circulation flow along the screw channel in the screw runner. It has been verified that the novel screw runner is very effective device in flow balance in the multi-cavity injection molding. cavity filling imbalance, multi-cavity injection molding, runner design, screw runner, thermal balance.

Determined Car Door Latch Injection Molding Process Conditions through the Finite Elements Analysis (유한요소 해석을 통한 차량용 도어 래치 사출성형 공정조건 결정)

  • Lee, Jung-Hyun;Lee, Seon-Bong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.10
    • /
    • pp.499-508
    • /
    • 2016
  • Injection molding is a method for manufacturing many products, wherein a plasticized resin is injected into a mold at high pressure and hardened. According to the method, the product can be manufactured into various forms, and the mass production of up to tens of thousands of products is possible. The purpose of this study was to determine the process conditions for manufacturing a door latch for automobiles, through an analysis of the injection molding method. To calculate an appropriate injection flow for injection molding, a primary analysis for comparing the injection time, pressure, flow pattern, consolidation range, shear stress, shear rate, and weld line, as well as a secondary analysis for determining the conditions for stabilizing the molding temperature, holding pressure, and cooling process, were conducted. The characteristics of injection molding, and their influence on the product quality are discussed. No weld line and pores were observed on the products that had been manufactured based on the process conditions determined above. In addition, there were no flaws regarding the deformation compared to the prototype. Therefore, the manufacture of a product under the conditions determined in this study can reduce the defect rate compared to the existing production, and the process is also more competitive due to reduced production time.

Modeling of Cooling Channels of Injection Mould using Functionally Graded Material (기능성 경사 복합재를 이용한 사출금형의 냉각회로 모델링)

  • Shin, Ki-Hoon
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.35 no.12
    • /
    • pp.1647-1653
    • /
    • 2011
  • The cycle time in injection moulding greatly depends on the cooling time of the plastic part that is controlled by cooling channels. Cooling channels are required to facilitate the heat transfer rate from the die to the coolant without reducing the strength of the die. Employing layered manufacturing techniques (LMT), a die embedding conformal cooling channels can be fabricated directly while conventional cooling channels are usually made of straight drilled hole. Meanwhile, H13 tool steel is widely used as the die material because of its high thermal resistance and dimensional stability. However, H13 with a low thermal conductivity is not efficient for certain part geometries. In this context, the use of functionally graded materials (FGMs) between H13 and copper may circumvent a tradeoff between the strength and the heat transfer rate. This paper presents a method for modeling of conformal cooling channels made of FGMs.

밀배아 분말첨가가 식빵의 품질특성에 미치는 영향

  • 김래영;전순실;서재수
    • Proceedings of the Korean Journal of Food and Nutrition Conference
    • /
    • 2000.12a
    • /
    • pp.51-51
    • /
    • 2000
  • 식생활의 서구화로 제빵 산업이 발달하고, 빵을 주식으로 하는 인구가 늘고 있다 또한 기존의 재료보다는 기능성이 첨가된 부재료를 활용한 건강 지향적인 식품의 수요가 증가하고 있는 추세이다. 최근 밀배아의 용도 다양화를 위하여 팔은 연구가 진행되고 있으며, 상업적으로 이용되고 있다. 소맥의 제분과정에서 부산물로 얻어지는 밀배에는 식물 중에서 가장 많은 천연 비타민 E 복합체가 이상적인 상태로 함유되어 있다. 밀배아에 들어 있는 비타민 E는 천연 비타민 E 복합체와 합성 비타민 E로 구분되어진다. 천연비타민E는 8가지 이성체를 가진 자연 비타민 E를 말하며, 4종류의($\alpha$$\beta$${\gamma}$$\delta$)의 토코페롤과 4종의 토코페롤의 복합체이다. 비타민 E는 사람을 포함한 고등동물에 필수적인 영양소로 식물성기름, 곡류, 배아 등에 많이 들어 있으며, 여러 이성질체중 $\alpha$-토코페롤이 체내에서 가장 생물학적 활성이 큰 것으로 알려졌으며, 생체막조직에서 인지질의 천연항산화제 역할을 하여 체내대사를 정상으로 유지하는데 큰 기능을 하는 것으로 보고되고 있다. 우리나라에서 식용으로 소비되는 밀은 거의가 수입에 의존하고 있으며, 밀배아는 거의 전량이 가축의 사료용으로 사용되고 있고 근래에 와서는 배아유, 배아떡, 복합 조미료, 쿠키, 배아를 첨가한 국수 등에 이용되고 있다. 따라서 본 실험에서는 식빵제조시 밀배아 분말을 0, 2, 4, 6, 8, 10%씩 첨가하여 기능성 식빵을 제조하였을 때의 반죽의 물성, 호화특성을 살펴보고 빵으로 제조하였을 때의 식빵의 품질 특성으로서 1차 발효 손실률, 굽기 손실률, 부피, 질감, 노화도, 관능적 특성 및 mould-free shelf life를 측정하였다.te, ferric citrate가 유제품에 사용하기에 적합한 것으로 나타났다. 생이용성을 평가하기 위하여 우유에서 low molecular weight components(ILC)를 분리하고 철분과 복합체를 형성시킨 다음, 철분 결핍된 쥐의 소장에서 loop을 형성시켜 ILC-철분 복합체를 injection하여 철분 흡수도를 조사하였다. Ferrous lactate 100ppm에서 약 25.6%흡수되었고 ferric citrate 100ppm은 24.7%, ferrous sulfate는 19.7%흡수되었다. ILC를 첨가하지 않은 100ppm 철분염 용액은 ferrous sulfate를 제외하고는 흡수도가 감소되었다. 철분 결핍된 쥐에게 gavage 방법에 의하여 철분강화우유를 투여하였을 때 철분 25ppm 시료에서는 ferrous sulfate가 12.5%로 가장 높았고 ferrous lactate는 8.1%, ferric citrate는 6.5% 흡수되었다. 철분 100ppm수준에서는 흡수율이 낮아져 ferrous sulfate는 25ppm 시료보다 절반이하 수준이었다. Ferric citrate는 차이가 거의 없었으며 ferrous lactate는 70%수준이었다. 이상의 결과에서 철분강화우유에 사용하기 적합한 철분염은 ferrous lactate, ferric citrate였는데 특히 ferrous lactate는 제품의 이화학적 품질, 생이용성 측면 모두에서 가장 좋은 것으로 나타났다.다 높았으며, 1회당 평균 8.1$\pm$5.1개의 난포란을 회수하였다. investigation can be separated into sampling and analytical uncertainties, it can be used as a criterion where the resources for the inves

  • PDF