• 대한전자공학회논문지TC
• /
• 제47권8호
• /
• pp.99-107
• /
• 2010

ATSC (Advanced Television Systems Committee) 방식의 지상파 디지털 TV 방송 시스템은 단일주파수망을 구성하기 위하여 송신기들 및 중계기들이 단일 주파수를 사용할 경우 수신기에서 다중 송신기 및 중계기 신호들이 수신되어 간섭을 초래할 수 있다. 이러한 간섭 문제를 해소하고자 ATSC 기술권고 (recommended practice)에서는 RF 워터마크 (watermark) 방식의 고유한 송신기 식별 코드 (transmitter identification: TxID)를 각 송신기 및 중계기에 할당한 후 이를 송신 및 중계 신호에 부가하여 전송하고 TxID 신호분석기를 통하여 각 송신기 및 중계기에서 송출된 신호가 겪는 채널 환경을 검출하여 송신기와 중계기의 송출전력 및 상대적인 송출시간을 조정함으로써 간섭 문제를 해결하도록 하고 있다. 본 논문에서는 가산 백색 가우시안 잡음 (additive white Gaussian noise: AWGN) 및 다중경로 채널 하에서 TxID 신호가 부가된 지상파 디지털 TV 방송신호의 역호환성을 분석한다. 전산 실험 및 실험실 테스트, 그리고 필드 테스트를 통하여 상용 디지털 TV 수신기의 threshold of visibility (TOV) 증가량은 AWGN 채널에 비해 다중경로 채널환경에서 더 높게 나타났으나 TxID 신호가 기존 디지털 TV 신호에 비해 30 dB 낮게 부가되어 전송될 경우 상용 디지털 TV 수신기의 평균 TOV 증가량은 0.2 dB 이하로 관찰되었다. 이러한 실험 및 테스트 결과는 RF 워터마크 방식의 TxID 신호가 상용 디지털 TV 수신기에 거의 영향을 주지 않음을 보여준다.

• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1247-1254
• /
• 2000

The effects of recirculated exhaust gas on the characteristics of $NO_x$ and soot emissions under a wide range of engine load have been experimentally investigated by a water-cooled, four-cylinder, indirect injection, four cycle and marine diesel engine operating at two kinds of engine speeds. The simultaneous control of $NO_x$ and soot emissions in diesel engines is targeted in this study. The EGR system is used to reduce $NO_x$ emissions, and a novel diesel soot removal device with a cylinder-type scrubber for the experiment system which has 6 water injectors(A water injector has 144 nozzles in 1.0 mm diameter) is specially designed and manufactured to reduce the soot contents in the recirculated exhaust gas to intake system of the engines. The intake oxygen concentration and the mean equivalence ratio calculated by the intake air flow and fuel consumption rate, and the exhaust oxygen concentration measured are used to analyse and discuss the influences of EGR rate on $NO_x$ and soot emissions. The experiments are performed at the fixed fuel injection timing of $15.3^{\circ}$ BTDC regardless of experimental conditions. It is found that $NO_x$ emissions are decreased and soot emissions are increased owing to the drop of intake oxygen concentration and exhaust oxygen concentration, and the rise of equivalence ratio as the EGR rate rises.

• 에너지공학
• /
• 제11권2호
• /
• pp.90-98
• /
• 2002

본 연구는 선회유동과 연소인자가 9.4L인 터보과급 디젤엔진의 성능과 배기가스특성에 미치는 영향을 실험적으로 고찰하였다. 일반적으로 디젤엔진의 연소과정에서 선회유동은 분사되고 있는 연료와 흡칩공기의 혼합을 촉진시켜 줌으로써 엔진성능을 향상시키는데 매우 중요한 인자가 된다. 특히 터보과급 디젤엔진에서는 실린더내의 고온.고압가스로 인하여 연비와 NO$_{x}$ 농도는 서로 상반관계를 가지므로 적절한 용량의 과급기선정으로 흡.배기시스템, 분사시스템 및 연소실의 설계 등을 고려할 필요가 있다. 본 연구의 결과로서, 정상유동실험을 통하여 선회비가 증가함으로써 평균유량계수가 감소하고, 반면에 걸프 펙터가 증가함을 알 수 있었다. 또한 엔진실험을 통하여 흡기포트의 선회비 2.43, 분사시기 BTDC 13$^{\circ}$ CA, 압축비 16, 리앤트란트 5$^{\circ}$형 연소실, 노즐분공경 $\Phi$0.28*6 및 과급기 GT40(압축기 A/R 0.58, 터빈 A/R 1.19)의 적용인자가 최적의 성능 및 배기가스를 만족시킬 수 있었다.

• 한국수정란이식학회지
• /
• 제26권3호
• /
• pp.171-180
• /
• 2011

In this study I report that in vitro development rates of bovine nuclear transfer embryos activated either with boar sperm cytosolic factor (SCF) or with ionomycin followed by cycloheximide (CHX) and subsequent in vivo developmental rates after embryo transfer are related to blastocyst quality as evaluated by apoptosis analysis. SCF was extracted from porcine semen then purified for post-activation injection after nuclear transfer. The optimal timing for SCF injection was determined to be at least 22 h post-IVM for parthenogenetic activation of bovine oocyies. A total of 364 oocytes were successfully enucleated and 268 (73.6%) fused and were injected with SCF. The survival rate of fused and injected embryos was 109/113 (96.5%) after 2 h. The cleavage rates of nuclear transfer embryos after 3 d of culture in the ionomycin/CHX treated group were significantly higher than those of the SCF-activated group (93.3% vs 81.7%, p<0.01, respectively). However, at 7 d and 9 d there was no significant difference between the total developmental rates to blastocyst for either treatment group. Total blastocyst cell numbers were also not significantly different between the two activation treatments (ionomycin/CHX: 149.5${\pm}$7.7 vs. SCF: 139.3${\pm}$4.4 cells). In contrast, the apoptotic levels in the SCF blastocysts were higher than those produced after the chemical treatment (28.2${\pm}$5.1% vs. 8.8${\pm}$0.6%, respectively). A total of 18 expanded or hatching blastocysts was transferred to nine synchronized recipients in each activation group; 5/9 (55.5%) and 2/9 (22.2%) were pregnant at 40 d in the ionomycin/CHX treatment and SCF activated group, respectively. However, only one went to term in the ionomycin/CHX treatment while none of the pregnancies from the SCF group were maintained by 90 d. In conclusion, these results suggest that SCF derived from different species is a limited activator to be used for activation after bovine nuclear transfer in lieu of a chemical activation protocol.

• 한국자동차공학회논문집
• /
• 제20권4호
• /
• pp.150-155
• /
• 2012

Lean NOx Trap (LNT) catalysts are capable of reducing exhaust NOx emissions from diesel engines. LNT stores NOx in lean condition and exhausts N2 by reducing NOx in rich condition. NOx reduction characteristic of LNT catalysts using throttle position sensor and fuel injection timing control for light-duty diesel engine was investigated. In contrast to SCR system, LNT catalyst uses diesel fuel in resuctant. Also if the concentration of reductant is exceeded, excessive amount of reductant will slip throughout LNT and cause another emission problem. Thus LNT regeneration with precise engine control established that can make higher NOx conversion efficiency and lower fuel penalty, prevent another emission problem. NOx and reductant concentration were measured by the NOx sensor and Mexa7100D equipped inlet and outlet of catalyst. As a result of engine test, regeneration strategy has reached high of 77.8% NOx conversion efficiency according to engine operation condition. Moreover, we have proved that it is possible to use regeneration strategy of LNT within 5% fuel penalty.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권3호
• /
• pp.70-78
• /
• 2000

The effects of recirculated exhaust gas on the characteristics of ;$NO_x$ and soot emissions under a wide range of engine load have been experimentally investigated by a water-cooled, four-cylinder, indirect injection, four cycle and marine diesel engine operating at two kinds of engine speeds. The purpose of the present study is to develop the EGR control system for reducing $NO_x$ and soot emissions simultaneously in diesel engines. The EGR system is used to reduce NOx emissions, and a novel diesel soot removal apparatus with a cylinder-type scrubber for the experiment system which has 6 water injectors(A water injector is made up 144 nozzles with 1.0mm in diameter) is specially designed and manufactured to reduce the soot contents in the recirculated exhaust gas to intake system of the engines. The intake oxygen concentration obtained by the intake air flow and the oxygen concentration in the recirculated exhaust gas, and the exhaust oxygen concentration measured in exhaust manifold are used to analyse and discuss the influences of EGR on NOx and soot emissions. The experiments are performed at the fixed fuel injection timing of $15.3^{\circ}$ BTDC regardless of experimental conditions. It is found that $NO_x$ emissions decrease and soot emissions increase owing to the drop of intake oxygen concentration and exhaust oxygen concentration as EGR rate rises. Also, one can conclude that it is sufficient for the scrubber EGR system with a novel diesel soot removal apparatus to reduce $NO_x$ emissions, but not to reduce soot emissions.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.827-835
• /
• 1998

The effects of recirculated exhaust gas on the wear of cylinder liner piston and piston rings have been investigated by the experiment with a two-cylinder four cycle indirect injection diesel engine operating at 75% load and 1600 rpm speed For the purpose of comparison between the rates of two cylinders with and without EGR the recirculated exhaust gas is sucked into one of two cylinders after the soot among exhaust emissions is removed by an intntionally designed cylinder-type scrubber equipped with 6 water injectors(A water injector has 144 nozzles of 1.0 mm diame-ter) while only the fresh air into another cylinder. These experiments are carried out on the fuel injection at a fixed $15.3^{\circ}$ BTDC timing. It is found that firstly the mean wear amount of cylinder liner with EGR is more increased in the measurement positions of the second half than of the first half and the mean wear amount without EGR is almost uniform regardless of measurement posi-tions secondly the wear rates of the first and second piston ring(compression ring)thickness with EGR are more than twice but the wear rate of oil ring thickness without EGR is more increased than that with EGR and finally the wear rate of piston skirt with EGR is a little bit increased but the piston hed diameter is rather increased owing to soot adhesion and corrosion wear and espe-cially larger with EGR.

• 한국추진공학회지
• /
• 제20권6호
• /
• pp.1-10
• /
• 2016

연소불안정 능동제어를 위해서는 음향 발생기나 2차 연료 분사를 통해 압력 섭동이나 열방출 섭동에 변화를 주어야 한다. 2차 연료 분사의 위치 및 시점을 결정하기 위해서는 연소불안정 시 발생하는 열방출 섭동의 분포를 알아야 한다. 본 연구에서는 탄화수소 연료, 유입 속도, 당량비, 음향가진 조건을 변화시키며 위상에 따른 열방출 섭동의 분포를 실험적으로 측정하였다. 와류 발생에 따른 열방출 섭동은 $Damk{\ddot{o}}hler$ 수에 의해 크게 영향을 받는 것을 알 수 있었다. $Damk{\ddot{o}}hler$ 수가 대략 4 - 5 보다 큰 경우는 와류의 leading edge에서 hot spot이 trailing edge에서 cold spot이 발생하였다. 이와는 반대로 $Damk{\ddot{o}}hler$ 수가 3 보다 작은 경우는 반대의 경향이 나타남을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5980-5987
• /
• 2014

디젤엔진의 사용은 루돌프 디젤에 의하여 발명된 이후 산업의 발달을 이끌어가는 중추적인 역할을 하고 있다. 2013년 기준으로 국내의 디젤엔진의 차량은 7,395,739대이다. 디젤엔진에서의 인젝터는 엔진의 구동에 직접적인 역활을 수행하기 때문에 성능향상에 대한 연구는 지속적으로 이루어지고 있다. 본 연구는 운행 중인 디젤차량의 매연의 농도와 인젝터 클리닝 전 후의 관계를 비교분석하기 위하여 인젝터 클리닝 전 후의 매연의 농도를 KD147 모드("운행차 수시점검 및 정기검사의 배출허용기준")로 측정하여 인젝터 클리닝이 매연 저감에 미치는 영향에 대하여 실험적으로 고찰하였다. 실험결과 인젝터 클리닝 후의 매연의 농도가 20% 이상 감소하는 것을 확인하였으며 매연의 농도의 감소율은 매연의 발생량이 클수록 증가하는 것으로 나타났다.

• 한국분무공학회지
• /
• 제24권1호
• /
• pp.35-42
• /
• 2019

Syngas is widely produced by incomplete combustion of coal, water vapor, and air (oxygen) in a high-temperature/high-pressure gasifier through a coal-gasification process for power generation. In this study, a simulation syngas which was mainly composed of $H_2$, CO, $CO_2$, and $N_2$ was fueled with diesel. A modified single cylinder compression ignition (CI) engine is equipped with intake port syngas supply system and mechanical diesel direct injection system for dual fuel combustion. Combustion and emission characteristics of the engine were investigated by applying various syngas composition ratios and compression ratios. Diesel fuel injection timing was optimized to increase indicated thermal efficiency (ITE) at the engine speed 1,800 rpm and part load net indicated mean effective pressure ($IMEP_{net}$) 2 to 5 bar. ITE of the engine increased with the $H_2$ concentration, compression ratio and engine load. With 45% of $H_2$ concentration, compression ratio 17.1 and $IMEP_{net}$ 5 bar, ITE of 41.5% was achieved, which is equivalent to that of only diesel fuel operation.