• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.32-39
• /
• 2000

To investigate the adsorption-desorption reaction of Cd by sewage sludge, the adsorption of Cd from $Cd(NO_3)_2$ solutions of concentrations ranging from 5 to $50{\mu}g\;Cd\;mL^{-1}$ by sewage sludge was examined for reaction periods up to 48 hours. The amount of Cd adsorbed as a function of time was measured. The adsorption between Cd in solution and the solid phase could be described by two stages. The initial adsorption of Cd was very rapid, that is, approximately 95% of the added Cd was removed from solution within the first 30 minutes. Further, the greater the concentration of Cd added, the greater was the amount of Cd adsorbed. After the rapid initial decrease of Cd, a slower decline in the Cd concentration resulted which followed first order reversible kinetics. The equilibrium concentrations for the reactions, as well as the time period for the equilibrium reactions were dependent on the initial Cd concentrations. If equilibrium is reached, the amount of Cd remaining in solution is greater when the amount adsorbed is higher, although the percentage of Cd in solution is constant relative to the initial concentration of Cd. Some of the adsorbed Cd was released back to solution since the concentration of Cd after 48 hours was higher than the equilibrium concentration of Cd. However, despite the increased amount of Cd measured, the overall net reaction was a significant adsorption of Cd from solution by sewage sludge.

• Korean Journal of Radiology
• /
• v.25 no.4
• /
• pp.351-362
• /
• 2024

Objective: To measure inter-reader agreement and identify associated factors in interpreting complete response (CR) on magnetic resonance imaging (MRI) following chemoradiotherapy (CRT) for rectal cancer. Materials and Methods: This retrospective study involved 10 readers from seven hospitals with experience of 80-10210 cases, and 149 patients who underwent surgery after CRT for rectal cancer. Using MRI-based tumor regression grading (mrTRG) and methods employed in daily practice, the readers independently assessed mrTRG, CR on T2-weighted images (T2WI) denoted as mrCR_T2W, and CR on all images including diffusion-weighted images (DWI) denoted as mrCR_overall. The readers described their interpretation patterns and how they utilized DWI. Inter-reader agreement was measured using multi-rater kappa, and associated factors were analyzed using multivariable regression. Correlation between sensitivity and specificity of each reader was analyzed using Spearman coefficient. Results: The mrCR_T2W and mrCR_overall rates varied widely among the readers, ranging 18.8%-40.3% and 18.1%-34.9%, respectively. Nine readers used DWI as a supplement sequence, which modified interpretations on T2WI in 2.7% of cases (36/1341 [149 patients × 9 readers]) and mostly (33/36) changed mrCR_T2W to non-mrCR_overall. The kappa values for mrTRG, mrCR_T2W, and mrCR_overall were 0.56 (95% confidence interval: 0.49, 0.62), 0.55 (0.52, 0.57), and 0.54 (0.51, 0.57), respectively. No use of rectal gel, larger initial tumor size, and higher initial cT stage exhibited significant association with a higher interreader agreement for assessing mrCR_overall (P ≤ 0.042). Strong negative correlations were observed between the sensitivity and specificity of individual readers (coefficient, -0.718 to -0.963; P ≤ 0.019). Conclusion: Inter-reader agreement was moderate for assessing CR on post-CRT MRI. Readers' varying standards on MRI interpretation (i.e., threshold effect), along with the use of rectal gel, initial tumor size, and initial cT stage, were significant factors associated with inter-reader agreement.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.89-98
• /
• 2009

In this study, the YLPODS (Yonsei Laser-ranging Precision Orbit Determination System) is developed for POD using SLR (Satellite Laser Ranging) NP (Normal Point) observations. The performance of YLPODS is tested using SLR NP observations of TOPEX/POSEIDON and CHAMP satellite. JPL's POE (Precision Orbit Ephemeris) is assumed to be true orbit, the measurement residual RMS (Root Mean Square) and the orbit accuracy (radial, along-track, cross-track) are investigated. The validation of POD using GPS (Global Positioning System) raw data is achieved by YLPODS performance and highly accurate SLR NP observations. YGPODS (Yonsei GPS-based Precision Orbit Determination System) is used for generating GPS based precise orbits for TOPEX/POSEIDON. The initial orbit for YLPODS is derived from the YGPODS results. To validate the YGPODS results the range residual of the first adjustment of YLPODS is investigated. The YLPODS results using SLR NP observations of TOPEX/POSEIDON and CHAMP satellite show that the range residual is less than 10 cm and the orbit accuracy is about 1 m level. The validation results of the YGPODS orbits using SLR NP observations of the TOPEX/POSEIDON satellite show that the range residual is less than 10 cm. This result predicts that the accuracy of this GPS based orbits is about 1m level and it is compared with JPL's POE. Thus this result presents that the YLPODS can be used for POD validation using SLR NP observations such as STSAT-2 and KOMPSAT-5.

• Journal of Chest Surgery
• /
• v.13 no.4
• /
• pp.475-485
• /
• 1980

For the past 5 year 6 months from January 1975 to June 1980, 176 patients with empyema have been treated in Chonnam University Hospital. They were 134 males and 42 females ranging from ] 8 days to 69 years of age. [mean age: 26.1 years] The duration of illness prior to treatment was relatively shorter in pediatric group than in adult group, that is, the duration of less than 1 month was 89.5% in pediatric group and 38.0% in adult group. In bacteria study there were Staphylococcus 26.1%, Streptococcus 17.6%, E. coil 10.8%, Pseudomonas 10.8%, Diplococcus pneumoniae 5.7% and Candidia. And 4 children and 3 adults had infections of two species of bacteria. The underlying pathologic lesions were pyogenic pneumonia 34.7%, tuberculosis 29.5%, paragonimiasis 15.3%, trauma 9.7% and postoperative state. The over-all mortality rate was 1.7% [3 patients]. The causes of death were sepsis In 1 child and sepsis secondary to esophageal fistula in 2 adults. Adequate drainage and obliteration of the pleural space seems to be the most important aspect of treatment and can frequently be achieved by initial tube drainage in acute empyema, especially in the pediatric group. The chronic thick walled or loculated cavities required open window therapy, decortication, resection therapy and sterilization. Modified Eloesser`s operation and 0.3-0.5% potadine irrigation brought good result in the patients who had general weakness, marked pulmonary parenchymal destruction due to pyothorax, and pyothorax with severe bronchopleural fistula.

• Smart Structures and Systems
• /
• v.9 no.3
• /
• pp.253-271
• /
• 2012

Finite element (FE) model updating is a useful tool for global damage detection technique, which identifies the damage of the structure using measured vibration data. This paper presents the application of a finite element model updating method to detect the damage of a small-scale reinforced concrete building structure using measured acceleration data from shaking table tests. An iterative FE model updating strategy using the least-squares solution based on sensitivity of frequency response functions and natural frequencies was provided. In addition, a side constraint to mitigate numerical difficulties associated with ill-conditioning was described. The test structure was subjected to six El Centro 1942 ground motion histories with different Peak Ground Accelerations (PGA) ranging from 0.06 g to 0.5 g, and analytical models corresponding to each stage of the shaking were obtained using the model updating method. Flexural stiffness values of the structural members were chosen as the updating parameters. In model updating at each stage of shaking, the initial values of the parameter were set to those obtained from the previous stage. Severity of damage at each stage of shaking was determined from the change of the updated stiffness values. Results indicated that larger reductions in stiffness values occurred at the slab members than at the wall members, and this was consistent with the observed damage pattern of the test structure.

• Journal of Surface Science and Engineering
• /
• v.46 no.6
• /
• pp.264-270
• /
• 2013

Effects of preoxidation on high temperature wear of piercing plug tool steel sliding against SA210C steel used for production of seamless tube have been studied using a pin-on-disc CETR tribometer, under applied normal load of 20 N at $900^{\circ}C$ in air. It was found in the preoxidized pin specimens of piercing plug tool steel that the coefficient of friction decreased to about 0.4 at an initial stage followed by showing nearly constant value of about 0.4 during high temperature wear testing. On the other hand, it was also found in the pin specimens without preoxidation that the coefficient of friction increased and fluctuated, ranging from about 0.3 to 0.6 during the tests until the running period of about 800 sec. The compact and continuous Fe-oxide layer was formed on the contact surface of the preoxidized pin specimens after high temperature wear testing followed by penetrating along the grain boundaries of coarse ferrite in the decarburized region beneath the oxide layer due to the lower hardness of the region.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.4
• /
• pp.359-370
• /
• 2015

The present study aims to numerically investigate the behavior of liquid droplet driven by capillarity force imbalance on horizontal surfaces ranging from hydrophilic to hydrophobic, under various conditions. The droplet behavior has been simulated using an in-house solution code(PowerCFD), which employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method(CICSAM) in a volume of fluid(VOF) scheme for phase interface capturing. The detailed droplet behavior was obtained under various conditions for droplets with different initial shapes, contact angles and surface tension forces(or Bond number). The mechanism of droplet transport was examined using the numerical results on the droplet shapes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.272-276
• /
• 2001

Multicomponent $Zr_{41.2}Ti_{13.8}Cu_{12.5}Ni_{10}Be_{22.5}$ bulk matallic glass alloy shows good bulk glass forming ability due to its high resistance to crystallization in the undercooled liquid state.1) In this study, DSC and X-ray diffractometry have been performed to confirm the amorphous structure of the master $Zr_{41.2}Ti_{13.8}Cu_{12.5}Ni_{10}Be_{22.5}$ alloy. To investigate the mechanical properties and deformation behaviors of the bulk metallic $Zr_{41.2}Ti_{13.8}Cu_{12.5}Ni_{10}Be_{22.5}$ alloy, a series of compression tests has been carried out at the temperatures ranging from $351^{\circ}C$ to $461^{\circ}C$ and at the various initial strain rates from $2{\times}10^{-4}s^{-1}\;to\;2{\times}10^{-2}s^{-1}$. There are two types of nominal stress-strain curves. The one shows linear stress-strain relationship meaning fracture at maximum stress, the other shows plastic deformation including steady-state flow. Also DSC analysis for the compressed specimens has been performed to investigate the change of thermal stability and crystallization behavior for the various test conditions.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1172-1176
• /
• 2003

This study aims to investigate the applicability of Sd/StFFF and to develop a method for size characterization of urban airborne particles, focusing primarily on particles larger than about 1 mm. It was found that the airborne concentration vary with time, although no particular seasonal trend was observed. When averaged over time, the airborne concentration was the lowest in the park areas with 99 ㎍/m³. The apartment, industrial, and central city area showed similar levels of the airborne concentrations with 166, 170, and 171 ㎍/m³, respectively. The housing area showed the highest airborne concentration with 201 μg/m³ among all tested areas. A power-programmed Sd/StFFF was used for size analysis of airborne particles with the initial field strength of 300 rpm, $t_a$ = 4, $t_i$ = -16, p = 8, and the flow rate of 7 mL/min. It was found that urban airborne samples were mostly populated by particles having diameters between about 5 to 20 ㎛, although all have broad size distributions ranging up to about 50 ㎛. Under the Sd/StFFF condition used in this study, no significant differences were found in size distributions among the airborne particles collected at different urban sites, and also among those collected at different times.

• Korean Journal of Veterinary Service
• /
• v.21 no.1
• /
• pp.67-77
• /
• 1998

The bovine fat necrosis is often seen as an incidental lesion in the adipose tissues of the abdominal cavity. Most of affected animals, however, have been detected at the slaughter house or routine necropsy. The purpose of this study was to examine the occurrence and distribution of abdominal fat necrosis in Korean native cattle, and its pathologic features. Postmortem inspection at an Chonju abattoir during a three-month period in 1997 detected at necrosis lesions in 67(6.6%) of the 1,012 animals received for slaughter. The occurrence was mainly in alimentary tracts and perirenal. Both sexes were affected, but the lesion were predominantly occurred in female. Gross lesions were white or yellowish in color and formed hard lumps irregular in shape ranging from small nodules to large solid masses. On the cut surface, lesions were occasionally seen chalky calcified granules and some of the lesions contained oil-like fluid. The surface of irregular shaped masses constricted kidneys and intestinal loops. Microscopically, the masses were encapsulated by thickened fibrous tissue, which infiltrated deeply and divided them into many irregular lobules. Initial lesions presented mild inflammatory cell and fibrous proliferation. It became fibroplasia in progressive lesions and resembled chronic lesion, eventhough no grossly apparent inflammatory reaction. The hard consistency of masses, due to fibroplasia, can compress the intestines, urinary organs, and reproductive organs.