• KSBB Journal
• /
• v.9 no.4
• /
• pp.428-435
• /
• 1994

Cell growth and production of ${\alpha}$-amylase, acetic acid and lactic acid were investigated in Bacillus amyloliquefaciens(ATCC 23350) flask culture with various carbon sources. Maximum dry cell density increased with increase in initial maltose concentration. Maximum dry cell density was the highest(1.4g/$\ell$) at 10g/$\ell$ of initial glucose concentration. With 10g/$\ell$ of initial glucose concentration, maximum specific cell growth rate was obtained. Among the various carbon sources maximum ${\alpha}$-amylase production was obtained with 149 unit/ml at 20g/$\ell$ of initial maltose concentration. With 5g/$\ell$ of initial maltose concentration, maximum ${\alpha}$-amylase production rate was obtained. By increasing carbon source concentration, acetic acid formation decreased. Acetic acid formation was higher in glucose than in maltose. By increasing carbon source concentration, lactic acid formation increased. Lactic acid formation was higher in maltose than in glucose.

• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.35-41
• /
• 2002

This study was conducted to evaluate the effect of initial concentration on pilot-scale composting of diesel-con-laminated soil. Sandy soi] was used in this study. Target contaminant, diesel oil, was spiked. at about 10,000, 25,000, and 50,000 mg TPH/kg of dry roil. Mit ratio of soil to sludge was 1:0.5 as wet weight basis. Removal efficiencies for initial concentrations of 12,966,23,894 and 51,042 mg TPH/kg were 90, 93 and 54％, respectively, during 33 days of composting. Normal alkanes in TPH ranged from 15 to 22％ in initial soils. Volatilization of individual normal alkane in 1,999 mg n-alkanes/kgwas completed within 4 days, while n-alkane compounds of Cl1-Cl4 in 5,270 and 9,836 mg n-alkanes/kg were volatilized continuously during 33 days of composing operation. The first order degradation rate con-stants for 12,966, 23,894, and 51,042 mg TPH/kg were 0.058, 0.076, and 0.022/day, and those for 1,997 5,270, and 9,836 mg n-alkanes/kg were 0.093, 0.100, and 0.019/day, respectively. Considering TPH removal rate, $CO_2$porduction rate, and dehydrogenase activity, the concentration of 51,042 mg TPH/kg inhibited biodegradation of diesel-composting.

• KSBB Journal
• /
• v.6 no.1
• /
• pp.85-90
• /
• 1991

Experiments of alcohol fermentation of the yeast,K. fragi1is CBS 1555 were performed to obtain the following results. In these experiments, the initial concentrations of sugar which was composed of inulin and fructose as weight ratio of one to one were 30, 50, 75, 100 and 150g/l and the initial densities of the microorganism were less than 0.5g/l, 10g/1 to 15g/1, and 50g/l. The functional relationship among specific growthrates, sugar concentrations, and alcohol concentrations could be expressed by Aiba-shoda equation and the specific growth rate represented the trend that decreased with increase in the initial concentration of the microorganism. Also, $\mu$max and Ks of Monod's equation could be expressed as the function of initial cell concentration like the following equations. $\mu$max=0.8-0.008X Ks=0.54X+8 In the region that sugar, alcohol and cell concentrations were 10g/1 to 120g/l, 0g/l to 60g/l and 0.5g/l to 50g/l respectively, the differences between the experimental values and the calculated ones for specific growth rate approached to 40% with respect to experimental values at the worst cases, but in most cases, those were distributed in the range of less than 20%.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.3
• /
• pp.332-337
• /
• 2003

Enzyme kinetics data play a vital role in the design of reactors and control of processes. In the present study, kinetic studies on pectinases were carried out. Partially purified polymethylgalacturonase (PMG) and polygalacturonase (PG) were the two pectinases studied. The plot of initial rate vs. initial substrate concentration did not follow the conventional Michaelis-Menten kinetics, but substrate inhibition was observed. For PMG, maximum rate was attained at an initial pectin concentration of 3 g/l, whereas maximum rate was attained when the initial substrate concentration of 2.5 g/l of polygalacturonic acid for PG I and PG II. The kinetic data were fitted to five different kinetic models to explain the substrate inhibition effect. Among the five models tested, the combined mechanism of protective diffusion limitation of both high and inhibitory substrate concentrations (semi-empirical model) explained the inhibition data with 96-99% confidence interval.

• Proceeding of KASS Symposium
• /
• 2005.05a
• /
• pp.89-98
• /
• 2005

Membrane structures, a kind of lightweight soft structural system, are used for spatial structures. The material property of the membrane has strong axial stiffness, but little bending stiffness. Therefore membrane structures arc unstable structures initially. These soft structures need to be introduced initial stresses first because of its initial unstable state, and it happens large deformation phenomenon. To find the structural shape after large deformation caused by initial stiffness introduced, we need the shape analysis considering geometric nonlinearity in structural design procedure. In this study, we investigate into the stress concentration at crack of membrane structures. Therefore, using the nonlinear analysis program that NASS (Nonlinear Analysis for Spatial Structures) perform nonlinear analysis, and stress distribution for creak length investigate for using linear elastic fracture mechanics.

• Structural Engineering and Mechanics
• /
• v.84 no.4
• /
• pp.465-477
• /
• 2022

The formation of biopolymer-soil matrices mainly depends on biopolymer type and concentration, soil type, pore fluid and phase transfer to influence its strengthening efficiency. In this study, the physical and mechanical properties of sodium alginate (SA) treated kaolinite are investigated through compaction test, thread rolling teat, fall cone test and unconfined compression test with considering biopolymer concentration, curing time, initial water content, mixing method. The results show that the liquid limit slightly decreases from 69.9% to 68.3% at 0.2% SA and then gradually increases to 98.3% at 5% SA. At hydrated condition, the unconfined compressive strength (UCS) of SA treated clay at 0.5%, 1%, 2% and 3% concentrations is 2.57, 4.5, 7.1 and 5.48 times of untreated clay (15.7 kPa) at the same initial water content. In addition, the optimum biopolymer concentration, curing time, mixing method and initial water content can be regarded as 2%, 28 days, room temperature water-dry mixing (RD), 50%-55% to achieve the maximum unconfined compressive strength, which corresponds to the UCS increment of 593%, compared to the maximum UCS of untreated clay (780 kPa).

• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.55-60
• /
• 2001

The effect of high energy B ion implantation and initial oxygen concentration upon defect formation and gettering of metallic impurities in Czochralski silicon wafer has been studied by applying DLTS( Deep Level Transient Spectroscopy), SIMS(Secondary ton Mass Spectroscopy), BMD (Bulk Micro-Defect) analysis and TEM(Transmission Electron Microscopy). DLTS results show the signal of the deep levels not only in as-implanted samples but also in low and high temperature annealed samples. Vacancy-related deep levels in as- implanted samples were changed to metallic impurities-related deep levels with increase of annealing temperature. In the case of high temperature anneal, by showing the lower deep level concentration with increase of initial oxygen concentration, high initial oxygen concentration seems to be more effective compared with the lower initial oxygen one.

• Journal of Ecology and Environment
• /
• v.30 no.3
• /
• pp.231-236
• /
• 2007

This study examined the decomposition of blades and culms of aquatic emergent plant species, Zizania latifolia, Phragmites communis and Typha angustata, and changes in nutrient contents during decomposition. Z. latifolia, P. communis and T. angustata were the most frequently occurring species in Lake Paldang of Han River, Korea. Experiments were carried out from July 27 to December 14, 2005 in Lake Paldang using the litter bag method. The remaining masses of blade litter of each species at the end of experimental period were 21.2% of initial dry weight in Z. latifolia, 32.5% in P. communis, and 44.7% in T. angustata. In addition, the remaining mass of culm was 22.6% of initial dry mass in Z. latifolia, 56.4% in P. communis, and 38.1% in T. angustata. During the litter decomposition period, P, K, Na, and Mg concentration decreased rapidly within 10 days, but Ca and Mg concentration declined slowly. K contents remained below 10% of initial values in all litter samples retrieved during decomposition, whereas Ca and Mg concentration remained above 40% and 50% during decomposition in all three species. Na, P and Mn contents in litter varied among species and plant parts. P concentration in culms of P. communis remained at about 60% of initial concentration throughout the study, but the remaining P content in culms of Z. latifolia was only 10% of the original value at the end of the study period. The Mn concentration in blades of P. communis increased about 15-fold relative to the initial content by the end of experiment.

• KSBB Journal
• /
• v.19 no.5
• /
• pp.358-362
• /
• 2004

Characteristics of cell growth and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] synthesis was investigated through flask and batch cultures of Alcaligenes latus and Comamonas acidovorans. The specific growth rate of C. acidovorans increased with yeast extract concentration and decreased with 1,4-butanediol concentration. Optimum glucose concentration for growth of C. acidovorans was 20 g/L. In one-step flask cultures of C. acidovorans, final dry cell weight and PHA content decreased with the ratio of 1,4-butanediol to glucose, while the 4HB fraction in copolymers gradually increased to 100 $mol\%$ with an initial 1,4-butanediol concentration of 20 g/L as single carbon source. The specific growth rate of A. latus decreased with v-butyrolactone concentration and optimum sucrose concentration for growth was 10 g/L. In batch cultures of A. latus, 4HB fraction increased with initial v-butyrolactone concentration. P(3HB-co-4HB) with 19 $mol\%$ 4HB was obtained when the initial ratio of v-butyloractone (g/L) to sucrose (g/L) was 10 : 10.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.5
• /
• pp.747-753
• /
• 2006

Air flotation is a solid-liquid separation process that utilizes up-flow microbubbles to thicken activated sludge and enhance clarification efficiency. Continuous air flotation experiments were performed to investigate the effect of operation parameters such as initial MLSS (mixed liquor suspended solid) concentration, air pressure, surface loading rate, air to solid (A/S) ratio, and flotation time on thickening efficiency. An initial activated sludge concentration ranged from 3,000 to 12,000mgSS/L and thickened sludge concentration varied from 6,400 to 28,100mgSS/L. The result showed that the thickening efficiency was mainly dependent on surface loading rate, A/S ratio, and flotation time. The pressure did not affect the thickening efficiency when it kept in the range of 1.6 to 1.8 bar. Experimental results showed that the thickening efficiency of activated sludge was increased only when the feed sludge concentration exceeded 5,000mgSS/L and the thickened concentration was over 20,000mgSS/L. At this time, SS concentration in the clarified liquid was ranged from 5 to 10mg/L.