• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.114-131
• /
• 1992

In the present work, a two-dimensional boundary-value problem for a large amplitude motion is treated as an initial-value problem by satisfying the exact body-boundary and nonlinear free-surface boundary conditions. The present nonlinear numerical scheme is similar to that described by Vinje and Brevig(1981) who utilized the Cauchy's theorem and assumed the periodicity in the horizontal coordinate. In the present thesis, however, the periodicity in the horizontal coordinate is not assumed. Thus the present method can treat more realistic problems, which allow radiating waves to infinities. In the present method of solution, the original infinite fluid domain, is divided into two subdomains ; ie the inner and outer subdomains which are a local nonlinear subdomain and the truncated infinite linear subdomain, respectively. By imposing an appropriate matching condition, the computation is carried out only in the inner domain which includes the body. Here we adopt the nonlinear scheme of Vinje & Brevig only in the inner domain and respresent the solution in the truncated infinite subdomains by distributing the time-dependent Green function on the matching boundaries. The matching condition is that the velocity potential and stream function are required to be continuous across the matching boundary. In the computations we used, if necessary, a regriding algorithm on the free surface which could give converged stable solutions successfully even for the breaking waves. In harmonic oscillation problem, each harmonic component and time-mean force are obtained by the Fourier transform of the computed forces in the time domain. The numerical calculations are made for the following problems. $\cdot$ Forced harmonic large-amplitude oscillation(${\omega}{\neq}0,\;U=0$) $\cdot$ Translation with a uniform speed(${\omega}=0,\;U{\neq}0$) The computed results are compared with available experimental data and other analytical results.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.345-354
• /
• 2007

A sedimentation analysis has been attempted to figure out sedimentation environment due to construction of coastal jetties, such as fish harbor dike, flow guided dike and jetty in shallow Kusipo area, in which tidal range marks up to 6.6 meters in spring tide. As an initial approach of understanding field measurement were done on several stations along reference lines with total station and photo analysis taken by remote controlled small air craft far one and half years. Also numerical tests were done by 2-D ADCIRC model considering dry-wet treatment to evaluate flow and bottom shear stress variations. According to direct measurement, deposition seems to be dominant on Kusipo beach. Model results show bottom shear stress lessens to $0.10{\sim}0.15\;N/m^2$ on most shadow zone of jetties and the inner zone is suffering sedimentation as a result of dike construction. However this is the first approach with limited analysis, thus it should be dealt further considering physical characteristics of bottom sediments in a complete sediment model on upcoming study.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1155-1160
• /
• 1999

The screening methodology modeling, dispersion modeling procedures for continuous and instantaneous releases of the gas phase flow from the storage tank and pressure relief valve were considered. This study was performed to develop the screening methodology for prediction and control of hazardous/toxic gas releases by estimating the 1-hr average maximum ground-level concentration of $Cl_2$ gas vs. downwind distance by incorporating source term model including the general/physical properties of released material and release mode of the $Cl_2$ storage tank of the chemical plant facilities, dispersion model, and meteorological/topographical data into the TSCREEN model. As the results of the study, it was found that dispersion modes of the dense gas were affected by the state of the released material, the released conditions, physical-chemical properties of released material, and the released modes (continuous and instantaneous releases), and especially largely affected by initial (depressurized) density of the released material and release emission rate as well as the wind velocity. Especially, this study was considered to release hazardous material as meteorological data. It was thought that this screening methodology can be useful as a preliminary guideline for application of the refined analysis model by developing the generic sliding scale methodology for various senarios selected.

• Korean Journal of Ecology and Environment
• /
• v.33 no.1 s.89
• /
• pp.23-30
• /
• 2000

n situ sediment oxygen demand (SOD), which takes place with the uptake of dissolved oxygen for biological metabolism and chemical oxidation in sediments, ranged from 1.57 to $12.55\;mg\;O_2\;m^{-2}\;h^{-1}$ in onshore of Lake Paldang from April to November 1999. SOD was influenced by the amount of organics and oxygen diffusion. Comparing the oxygen demands partitioning between overlying water and sediment during initial phase, SOD accounted for $63.8{\sim}94%$ of total oxygen demand in Lake Paldang. The chemical SOD and nitrogenous oxygen demand ranged $1.2{\sim}18.3%$ and $8.3{\sim}51.7%$ of total SOD, respectively. This result indicated that SOD in Lake Paldang occurred mainly by aerobic respiration and nitrification. Although the flow velocity could increase SOD within a certain limit, the effect of sediment depth on SOD was dependent on physicochemical properties of the sediment. This study showed that SOD can represent a significant portion of the total oxygen up-take in Lake Paldang. Therefore, the assessment of SOD might be necessary for the control of water quality.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.5
• /
• pp.92-100
• /
• 2011

This paper describes a numerical modeling for deflection calculation using the natural frequency response that is measured acceleration response for concrete bridges. In the formulation of the dynamic deflection, the change amounts and the transformed responses about six kinds of free vibration responses are defined totally. The predicted response can be obtained from the measured acceleration data without requiring the knowledge of the initial velocity and displacement information. The relationship between the predicted response and the actual deflection is derived using the mathematical modeling that is induced by the process of a acceleration test data. In this study, in order to apply the proposed response predicted model to the integration scheme of the natural frequency domain, the Fourier Fast Transform of the deflection response is separated into the frequency component of the measured data. The feasibility for field application of the proposed calculation method is tested by the mode superposition method using the PSC-I bridges superstructures under several cases of moving load and results are compared with the actually measured deflections using transducers. It has been observed that the proposed method can asses the deflection responses successfully when the measured acceleration signals include the vehicle loading state and the free vibration behavior.

• Ocean and Polar Research
• /
• v.40 no.2
• /
• pp.69-75
• /
• 2018

We investigated the effects of environmental variations on the growth and survival rate of Stichopus japonicus to determine the optimum environmental conditions for its growth. Literature studies and a 12 month-long diver survey were carried out to understand the habitat, ecology and size of the surveyed area. Based on the collected data, we suggested optimum habitat conditions for releasing S. japonicus. Experiments on releasing S. japonicus were conducted in the breakwater of the Hwagye fishing cooperative in Hwagey-ri, Namhae-un, Gyeongsangnam-do, Korea. To implement the experiments, we divided the surveyed area into 4 sub-areas with different characteristics: (1) sand and silt zone; (2) artificial sea cucumber bank zone; (3) artificial rock bank zone; and (4) marine algae zone. The experiment lasted for 12 months. We released 32,000 sea cucumbers over $120m^2$ of each of the sand and silt zone, artificial rock bank zone and marine algae zone and released 6,000 sea cucumbers over $120m^2$ of the artificial sea cucumber bank zone. The average density of the released sea cucumbers from day 30 to day 360 after the releasing was conducted was the highest in the artificial sea cucumber bank zone ($23.7animal/m^2$), which was followed by artificial rock bank zone ($2.0animal/m^2$), marine algae zone ($1.9animal/m^2$) and sand and silt zone ($0.8animal/m^2$). The analysis on growth showed that the initial average weight of 2.3 g increased on day 360 after the releasing to 12.5 g in the artificial sea cucumber rank zone, 20.2 g in the sand and silt zone, 23.3 g in the artificial rock bank zone and 22.9 g in the marine algae zone. Results from the experiment along with the literature analysis suggest the following optimum habitat conditions: $10-15^{\circ}C$ water temperature; 28-34 psu salinity; 5-10 m water depth; 0.2-0.5 m/s velocity; rock, stone and muddy sand as substrate; and less than 20% mud in the substrate.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.1
• /
• pp.33-41
• /
• 1996

In order to study the effect of phenobarbital(PB) on the hepatic transport of diltiazem(DTZ), $Ca^{2+}$ channel blocker, we used isolated hepatocytes of rat which was intraperitoneally pretreated with phenobarbital sodium(75 mg/kg) for four days once a day. For the isolation of rat liver cells, a modification of the two step procedure of Seglen was used. DTZ was dissolved in incubation buffer to the final DTZ concentrations of 200, 400, 600, 800 and 1000 ng/ml in order to elucidate the uptake characteristics of DTZ by hepatocytes. Reactions were stopped at 10, 20, 30, 45, 60, 90, 120 and 300 sec. The initial velocity was determined by disappearance of diltiazem in the hepatocyte suspension. On the other hand, to determine the effect of PB on the in vitro hepatic intrinsic clearance of DTZ we obtained the metabolism rates of DTZ in the control and the PB-pretreated rat hepatocyte at various time intervals. According to pretreatment with PB, the size of hepatocyte and the amount of protein per $10^6$ cells were significantly (p<0.01) increased from $26.92{\pm}0.1364\;m$ to $35.31{\pm}1.00\;m$ and from $468{\pm}6.5\;{\mu}g/10^6$ cells to $628.8{\pm}12.1{\mu}g/10^6$ cells, respectively. In the case or hepatic uptake of diltiazem, $K_m$ was not different in the normalization by cell numbers and increased from $2.90\;{\mu}M\;to\;13.89\;{\mu}M$ in the normalization by protein amount. $V_max$ was increased regardless of normalization by protein amount and cell numbers, from $1.21\;{\mu}mole/min \;{\cdot}\;mg\;protein\;to\;3.96\;{\mu}mole/min\;{\cdot}\;mg\;protein\;and\;from\;2.38\;{\mu}mole/min\;{\cdot}\;10^6\;cells\;to\;2.83\;{\mu}mole/min\;{\cdot}\;10^6\;cells$, respectively. The in vitro hepatic intrinsic clearance of DTZ was significantly (p<0.01) increased from $0.640{\pm}0.038\;ml/mim\;{\cdot}\;10^6\;cells\;to\;2.385{\pm}0.212\;ml/min\;{\cdot}\;10^6\;cells$ due to PB-pretreatment. These results suggest that the uptake of DTZ by hepatocyte is extremely fast and PB enhances the hepatic intrinsic metabolic clearance of DTZ.

• Journal of the Korean earth science society
• /
• v.30 no.6
• /
• pp.787-798
• /
• 2009

A new apparatus was presented in order to help understand the concept of the Coriolis force which is essential in understanding the trajectories of the atmospheric current and the tide of seawater. In the apparatus proposed in high-school textbooks, since the slide from which the ball is released is set outside the rotating disk, it was not possible to interpret, with the trajectory of the ball on the disk, the motion of the atmosphere and the current of seawater occurring as a result of the Coriolis force. In order to resolve such problem, a new apparatus was developed in which the slide was set on the disk and rotated with the disk. Experiments were carried out using both the existing apparatus and the new apparatus, and the results were compared. While, in the experiment performed with the existing apparatus, it was difficult to analyze the trajectory of ball because the motion of the ball was not smooth when it hit the disk, in the experiment with the new apparatus it was much easier to analyze the trajectories. It was also possible to compare the trajectories when the initial velocity of the ball was varied.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.140-146
• /
• 2000

The physicochemical properties, such as retrogradation, fat acidity and viscosity, on the pine nut's gruel at various contents of pine nut (0, 1, 3 and 5%) during storage at 4, 25 and $40^{\circ}C$ were investigated. The degree of retrogradation was increased rapidly at the initial storage stage. The lowest value (about 10%) of the degree of retrogradation was observed in the gruel sample containing 3% of pine nut. Also, the rate constant of retrogradation was showed the lowest value (0.0422) in the gruel containing 3% of pine nut regardless of storage temperatures. The fat acidity was showed the lower value than 30 mg KOH in all samples. The viscosity increasing velocity(RVU/min) between holding strength and final viscosity was decreased as the pine nut's content was increased. However, it was not affected by the storage temperatures.

• Membrane Journal
• /
• v.15 no.4
• /
• pp.338-348
• /
• 2005

The permeate flux decline on microfiltration capillary membrane operation was investigated with inorganic colloidal solutions. The permeate flux of the alumina solution is two times higher in average than that of the bentonite solution. The flux decline with increase in operation time was less in the alumina solution than in the bentonite solution. The rate of initial flux decline until 10 min was higher on the bentonite solution over the alumina solution. The decline in permeate flux was due to both the cake formation and the pore blocking. The latter effect was higher in the operation of the bentonite solution. In comparing the ratio of each fouling component to the total fouling fur the $1.0\;kg_f/cm^2$ TMP condition, complete blocking was $9.35\%$, standard blocking was about $6.82\%$ and cake filtration was $83.83\%$, respectively. With the increase in cross flow velocity, the permeate flux increased by $6.0\%$ for the alumina solution and by 14.0 for the bentonite solution. With the increase in average pore size fromm $0.24\;{\mu}m\;to\;0.34\;{\mu}m$, the permeate flux increases 1.61 times for the alumina solution and 1.76 times far the bentonite solution.