• 제목/요약/키워드: Initial Strain

검색결과 1,355건 처리시간 0.028초

Lactobacillus plantarum KLAB21의 배양조건에 따른 4-Nitro-O-Phenylenediamine(NPD)에 대한 항돌연변이 활성 (Effects of Culture Conditions on the Antimutagenic Activity of Lactobacillus plantarum KLAB21 against 4-Nitro-O-Phenylenediamine (NPD))

  • 이창호;우철주;박희동
    • 한국식품저장유통학회지
    • /
    • 제5권4호
    • /
    • pp.386-391
    • /
    • 1998
  • 김치로부터 분리 동정된 Lactobacillus plantarum KLAB21 균주에 있어서 항돌연변이 활성물질 생산을 위한 최적 조건을 조사하였다. 탄소원으로서 glucose 첨가시 가장 높은 항돌연변이 활성을 나타내었으며, 질소원으로서는 yeast extract와 bactopeptone 첨가시 활성이 우수하였다. 탄소원인 glucose의 농도는 2%에서, 질소원인 yeast extract와 bactopeptone의 농도는 1%에서 가장 우수한 항돌연변이 활성을 나타내었다. 항돌연변이 활성의 최적 배양 조건은 초기 pH 배양온도, 배양속도 각각 7.0, 37$^{\circ}C$, 150rpm이었다. 상기의 최적 조건에서 36시간 배양시 가장 높은 항돌연변이 활성을 나타내었는데 S. typhimurium TA100과 S. typhimurium TA98을 이용한 조사결과 항돌연변이 활성이 각각 73.95%, 59.47%이었다.

  • PDF

선형 근사화방법을 이용한 비대칭 복합 적층평판의 이산최적화 (Discrete Optimization of Unsymmetric Composite Laminates Using Linear Aproximation Method)

  • 이상근;구봉근;한상훈
    • 전산구조공학
    • /
    • 제10권2호
    • /
    • pp.255-263
    • /
    • 1997
  • 실제로 구조시스템들의 최적설계는 설계변수가 연속값이 아닌 이산값을 요하는 경우가 대부분이다. 본 논문은 이산형 설계변수를 갖는 비대칭 복합 적층평판에 대해 선형 근사화방법을 이용한 이산최적설계를 수행하였으며, 이 방법이 매우 효율적임을 보였다. 대상 문제는 축력, 전단력, 그리고 휨과 비틀림 모멘트의 평면 내하중들(in-plane loads)의 다중하중조건을 받는 것으로 고려하였으며, 복합 적층평판을 구성하는 플라이들에 대한 최대변형률 규준을 설계 제약조건으로 부과하였다. 이산 최적화를 위한 초기 접근방법으로 단 한번의 연속변수 최적화 과정이 FDM(Feasible Direction Method)을 이용하여 수행되었으며, 차후 이산 및 연속변수를 포함하는 비선형 이산최적화문제를 SLDP(Sequential Linear Discrete Programming)방법에 의해 선형 근사화된 혼합정수계획문제로 형성하여 풀었다. 수치예에서 6개의 플라이로 구성된 비대칭 복합 적층평판을 대상으로 회전식 적층배열([(90-.theta.)/-(60+.theta.)/-.theta./-(45+.theta.)/(45-.theta.)]/sub s/)에 따른 이산최적해를 구하였다. 효율성 입증을 위해 똑같은 문제를 비선형 분기한계법을 이용하여 풀었으며, 그 결과를 비교 분석하였다.

  • PDF

진공 저온 분사 공정을 통해 형성된 Fe계 비정질 재료의 적층거동 및 미세구조 변화 관찰 (Deposition Behavior and Microstructure of Fe-based Amorphous Alloy Fabricated by Vacuum Kinetic Spraying Process)

  • 권주혁;박형권;이일주;이창희
    • 한국재료학회지
    • /
    • 제24권1호
    • /
    • pp.60-65
    • /
    • 2014
  • Fe-based amorphous coatings were fabricated on a soda-lime glass substrate by the vacuum kinetic spray method. The effect of the gas flow rate, which determines particle velocity, on the deposition behavior of the particle and microstructure of the resultant films was investigated. The as-fabricated microstructure of the film was studied by field emission scanning electron microscopy (FE-SEM) and high resolution transmission electron microscopy (HR-TEM). Although the activation energy for transformation from the amorphous phase to crystalline phase was lowered by severe plastic deformation and particle fracturing under a high strain rate, the crystalline phases could not be found in the coating layer. Incompletely fractured and small fragments 100~300 nm in size, which are smaller than initial feedstock material, were found on the coating surface and inside of the coating. Also, some pores and voids occurred between particle-particle interfaces. In the case of brittle Fe-based amorphous alloy, particles fail in fragmentation fracture mode through initiation and propagation of the numerous small cracks rather than shear fracture mode under compressive stress. It could be deduced that amorphous alloy underwent particle fracturing in a vacuum kinetic spray process. Also, it is considered that surface energy caused by the formation of new surfaces and friction energy contributed to the bonding of fragments.

5083-H115 알루미늄 합금의 혼합 모우드 피로 균열성장 특성 (Mixed-mode fatigue crack growth behaviors in 5083-H115 aluminum alloy)

  • 옹장우;진근찬;이성근;김종배
    • 대한기계학회논문집
    • /
    • 제13권3호
    • /
    • pp.461-471
    • /
    • 1989
  • 본 연구에서는 혼합 모우드 균열문제의 연구를 위하여 .KAPPA.$_{II}$ /.KAPPA.S1I\ulcorner조절이 간편하고, 균열진전경로가 하중방향에 따른 균일전면의 자유표면의 영향을 균일하게 한 시험편(이하 RCM 또는 round compact mixed-mode 시험편이라 한다)을 고안하여 균열길이 및 하중작용 방향에 따른 .KAPPA.$_{I}$ 및 .KAPPA.S1II를 수치해석한 다음 일반화 하였다. 또 고강도와 용접성이 요구되는 항공기부품, 압력용기, 지상운송차량 등에 사용되고 있는 5083-H115 알루미늄 합금에 대해 혼합 모우드 균열진전 방향 및 피로균열 진전특성을 분석하고자 한다.다.

Salmonella typhimurium Strain TA98, 100에서 감잎차, 녹차, 우롱차 추출물의 돌연변이 억제 효과 (Antimutagenic Effects of Water Extracts of Persimmon Leaf Tea, Green Tea and Oolong Tea on Reversion and Survival of Selected Salmonella Tester Strains)

  • 강명희;송현순;이현걸
    • 한국식품영양과학회지
    • /
    • 제28권3호
    • /
    • pp.599-606
    • /
    • 1999
  • Water extracts of persimmon leaf tea(PLTE), green tea(GTE) and oolong tea(OTE), at the con centration used for human consumption, were examined for inhibitory effects on the mutagenicity of major classes of dietary and environmental mutagens including indirect acting mutagens, B[ ]P (benzo[ ]pyrene), IQ(2 amino 3 methylimidazo[4,5 f]quinoline), 2 AA(2 aminoanthracene) in the presence of S9 mix and direct acting mutagen, 4 NQO(4 nitroquinoline 1 oxide) without S9 mix, using the modified Ames Salmonella/microsome assay. PLTE, GTE and OTE showed very potent and concentration dependent antimutagenic effects against indirect acting mutagens B[ ]P and IQ. At the maximum concentration(16,200 g/plate) of each tea extract, number of colonies decreased in a dose dependent manner up to 82~100%. Similar inhibition of PLTE, GTE and OTE were seen at higher concentration in the mutagenicity of the 2 AA following an initial increase in the activity at lower concentration. However, the mutagenicity of the direct acting mutagen 4 NQO were not suppressed at lower concentration of the three tea extracts, and higher concentration of the tea extracts enhanced mutagenic activity of the mutagen. There were no differences in the mode of antimutagenesis between PLTE, GTE, and OTE, in both Salmonella typhimurium TA98 and TA100 strains against the same mutagen. In conclusion, the water extracts of persimmon leaf tea, green tea and oolong tea possess marked antimutagenic potential against a variety of important dietary and environmental indirect acting mutagens, but the activity was not observed against the direct acting mutagens. These results suggest that the mode of inhibitory action may not have resulted from direct interaction between tea extracts and the mutagens, but rather from indirect metabolic inactivation of mutagens by tea extracts.

  • PDF

유한 요소법을 이용한 축대칭 하이드로 미케니칼 디프 드로잉 공정의 해석 (Analysis of the Axisymmetric Hydro-Mechanical Deep Drawing Process by Using the Finite Element Method)

  • 양동열;김한경;이항수;김경웅
    • 대한기계학회논문집
    • /
    • 제16권5호
    • /
    • pp.873-882
    • /
    • 1992
  • 본 연구에서는 축대칭 형상의 하이드로 미케니칼 디프드로잉 공정을 강소성 유한요소법으로 해석하는 것이다. 본 논문에서는 Fig.1에서 보이는 바와 같은 경우 에 대하여 평두 펀치(flat headed punch)를 사용한 공정을 강소성 유한요소법으로 해 석하였으며 펀치 행정에 따른 챔버내의 압력 및 플랜지부의 압력분포를 구하였다. 접촉부의 처리는 플랜지부의 압력분포를 구하였다. 접촉부의 처리는 Yang등이 제안 한 방법을 적용하였다. 이론해석의 타당성을 알아보기 위하여 금형을 설계, 제작하 고 실험을 수행하여 결과를 비교 검토하였다.

멸치 어간장으로부터 분리한 Bacillus amyloliquefaciens HTP-8 이 생산하는 단백질 분해효소의 특성 (Characterization of Protease Produced by Bacillus amyloliquefaciens HTP-8 Isolated from Korean Fermented Anchovy Sauce.)

  • 임형택;정순경;김기남;하정욱;백현동
    • 한국미생물·생명공학회지
    • /
    • 제30권1호
    • /
    • pp.26-32
    • /
    • 2002
  • 저염상태에서 속성 발효를 통한 멸치 어간장의 대량 생산을 위하여 시중 어간장에서 단백질 분해효소 생산이 우수한 균주를 분리 동정하여, B. amyloliquefaciens HTP-8로 명명하였다. 효소생산을 위한 배양 최적온도, 초기 pH, 그리고 배양시간은 각각 $30^{\circ}C$, pH 7.0과 3일이었다. Jar fermenter 배양시 pH를 7.0으로. 조절한 경우가 조절하지 않은 경우에 비해 효소활성이 최대에 이르는 시간이 단축되었다. 효소의 부분정제는 조효소액을 80% ammonium sulfate에 의한 염석과 CM-Sephadex C-50을 이용하여 정제한 결과, 수율이 0.4%, 정제배수가 43.0배였다. 정제효소의 최적 pH와 온도는 pH 10.0과 $50^{\circ}C$였으며, pH 7.0~l2.0의 pH 범위와 $40^{\circ}$ 이하에서 안정하였다. 금속이온 중 $Ag^{+}$ /, $Ba^{2+}$ /에 의하여 효소활성이 저해되었다. 한편, 본 효소는 PMSF에 의하여 선택적으로 활성이 억제됨으로써 활성부위에 serine을 가진 serine protease에 속하는 것으로 판단되었다.

Anthraquinone계 염료의 제거를 위한 호알칼리성 Bacillus sp.의 분리와 성장 특성 (Isolation and Growth Characteristics of Alkalophilic Bacillus sp. for Removal of Anthraquinone Dye.)

  • 김정목
    • 한국미생물·생명공학회지
    • /
    • 제29권2호
    • /
    • pp.67-71
    • /
    • 2001
  • 자연계로부터 anthraquinone계 염료인 Remazol brilliant blue R를 분해.탈색하는 호알칼리성 균주를 분리하여 Bacillus sp. ARB1으로 명명하고 성장특성을 조사하였다. 최적 배양온도와 pH는 $35^{\circ}C$, pH 9.0로 나타났다. 배양액의 초기 pH가 10과 10.5일 경우 배양시간의 경과에 따라 pH 값이 점점 감소하여 40시간 후 9.3, 9.4로 각각 감소하였다. 진탕배양의 경우가 정치배양의 경우보다 Bacillus sp. ARB1의 탈색율이 현저히 높았다. 최적 배양조건에서 Bacillus sp. ARB1을 회분배양한 결과 배양 32시간 후 93%의 탈색율을 나타내었다. 실제 염색가공폐수를 사용한 회분배양에서 40시간 후에 탈색율은 78%로 나타났다.

  • PDF

주기적인 반복 열하중이 패키징된 FBG 센서 신호 특성에 미치는 영향 (Effects of Cyclic Thermal Load on the Signal Characteristics of FBG Sensors Packaged with Epoxy Adhesives)

  • 김헌영;강동훈
    • 대한기계학회논문집A
    • /
    • 제41권4호
    • /
    • pp.313-319
    • /
    • 2017
  • 광섬유 센서는 전자기 간섭에 독립적이고 원거리 계측이 가능하여 다양한 분야에 적용되고 있다. 특히, 광섬유 브래그 격자(FBG) 센서는 다중화, 절대측정이 가능하여 구조 건전성 모니터링(SHM)을 위해 널리 사용되고 있다. 일반적으로, FBG 센서는 에폭시와 같은 접착제를 이용하여 구조물에 직접 부착 및 모듈 제작을 통해 적용한다. 하지만, 에폭시로 부착된 FBG 센서 기반의 장시간 모니터링 과정에서 신호 변화가 발생하여 보정이 요구된다. 이는 계절적 요인으로써 장시간 온도 변화 환경에 노출되어 센서의 접착구조 변형에 의한 결과이며, 센서 접착제의 열경화 과정에 대한 규명이 필요하다. 본 연구에서는, 패키징 방식 4가지 경우의 FBG 센서 시편을 제작하고, 반복 열하중 시험을 수행하였다. 시험 결과, 상온경화 과정에서 미소한 잔류 압축 변형률이 발생하였고, 반복 열하중 초기단계에서 수백 ${\mu}{\varepsilon}$의 압축 변형률이 인가되어 유지되었다. 이를 통해 FBG를 이용한 장시간 SHM을 위해서는 FBG 센서의 신호에 대한 안정화 과정이 필요함을 확인하였다.

Achieving High Yield of Lactic Acid for Antimicrobial Characterization in Cephalosporin-Resistant Lactobacillus by the Co-Expression of theosphofructokinase and Glucokinase

  • Gong, Yahui;Li, Tiyuan;Li, Shiyu;Jiang, Zhenyou;Yang, Yan;Huang, Junli;Liu, Zhaobing;Sun, Hanxiao
    • Journal of Microbiology and Biotechnology
    • /
    • 제26권6호
    • /
    • pp.1148-1161
    • /
    • 2016
  • Lactobacilli are universally recognized as probiotics that are widely used in the adjuvant treatment of inflammatory diseases, such as vaginitis and enteritis. With the overuse of antibiotics in recent years, the lactobacilli in the human body are killed, which could disrupt the microecological balance in the human body and affect health adversely. In this work, cephalosporin-resistant Lactobacillus casei RL20 was obtained successfully from the feces of healthy volunteers, which possessed a stable genetic set. However, the shortage of lactic acid (72.0 g/l at 48 h) by fermentation did not meet the requirement for its use in medicine. To increase the production of lactic acid, the functional genes pfk and glk were introduced into the wild strain. A yield of 144.2 g/l lactic acid was obtained in the transgenic L. casei RL20-2 after fermentation for 48 h in 1 L of basic fermentation medium with an initial glucose concentration of 100 g/l and increasing antibacterial activity. These data suggested that L. casei RL20-2 that exhibited a high yield of lactic acid may be a potential probiotic to inhibit the spread of bacterial infectious diseases and may be used for vaginitis therapy.