• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.223-229
• /
• 2015

Surface modification is a technology to form a new surface layer and overcome the intrinsic properties of the base material by applying thermal energy or stress onto the surface of the material. The purpose of this technique is to achieve anti-corrosion, beautiful appearance, wear resistance, insulation and conductance for base materials. Surface modification techniques may include plating, chemical conversion treatment, painting, lining and surface hardening. Among which, a surface modification process using electrolytes has been investigated for a long time in connection with research on its industrial application. The technology is highly favoured by various fields because it provides not only high productivity and cost reduction opportunities, but also application availability for components with complex geometry. In this study, an electrochemical experiment was performed on the surface of 5083-O Al alloy to determine an optimal electrolyte temperature, which produces surface with excellent corrosion resistance under marine environment than the initial surface. The experiment result, the modified surface presented a significantly lower corrosion current density with increasing electrolyte temperature, except for $5^{\circ}C$ of electrolyte temperature at which premature pores was created.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.4
• /
• pp.328-333
• /
• 2000

The spore of Aspergillus niger KCTC-6144 was immobilized on alginate gel beads. When pumpkin powder was used with glucose for a medium of citric acid fermentation by Aspergillus niger beads, the beaded Aspergilus niger grew up inside the bead and mycelia penetrated through the pore of the bead membrane. The bead size became largely from 2.0∼2.5mm to 6∼8mm after growing at 30$\^{C}$ for 4 days. Studies of optimum culture conditions on citric acid fermentation using Aspergillus niger beads on pumpkin medium (pumpkin powder 1% +glucose 7%, pH 6.0) were carried out in submerged cultures on 250m1 Erlenmeyer flask. As a result, it was found that to reinforce 12% as carbon source was good for citric acid production and that 1% pumpkin powder was good as nitrogen and mineral source in orbital shaker (150rpm) at 30$\^{C}$ for 5 days. The optimum initial pH on citric acid production was pH 6.0 and it was found that 100 beads of immobilized Aspergillus niger was adequate for citric acid production in a 250ml Erlenmeyer flask containing 50m3 of pumpkin medium solution with orbital shaker at 30$\^{C}$ for 5 days. We also found that maximal production of citric acid was 23.5g/ℓ at optimal condition (at 30$\^{C}$ for 5 days, pH 6.0, and 100 beads and medium containing 1% pumpkin powder plus 12% glucose).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.221-227
• /
• 2007

Fenton's reagent is applied to directly decompose the ion-exchange resins, IRN-78 and the mixed resin with IRN-77. The newly applied procedures is to dry the resin first and the catalyst solution is completely absorbed into the resin, then a limited dose of $H_2O_2$ is introduced for an effective reaction between the reagents within the resin. As a characteristic on the decomposition of IRN-78, the resin mixture should be heated to $40^{\circ}C$ to induce the initial reaction and lag time is also needed for about 20 minutes until the main reaction occurs. The effectiveness of the decomposition is investigated using $CuSO_4,\;Cu(NO_3)_2\;and\;FeSO_4$ as a catalyst and the decomposition rate is compared depending on the concentration of each catalyst and the amount of $H_2O_2$. The most effective catalyst was found to be $FeSO_4$ for IRN-78 alone and the mixed resin with IRN-77, and $FeSO_4$ showed a special effect that the reaction was initiated without heating and a lag time. Furthermore, the optimum concentration of the catalyst for each resin and the mixed one is suggested in the view point of the amount of $H_2O_2$ needed and the stability of the decomposition reaction.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.4
• /
• pp.291-302
• /
• 2004

Blast-induced anisotropic rock damage around a blast-hole was analyzed by a using numerical method with user-defined subroutine based on continuum damage mechanics. Anisotropic blasting pressure was evaluated by applying anisotropic ruck characteristics to analytical solution which is a function of explosive and rock properties. Anisotropic rock damage was evaluated by applying the proposed anisotropic blasting pressure. Blast-induced isotropic rock damage was also analyzed. User-defined subroutines to solve anisotropic and isotropic damage model were coded. Initial rock damages in natural ruck were considered in anisotropic and isotropic damage models. Blasting pressure and elastic modulus of rock were major influential parameters from parametric analysis results of isotropic rock damage. From the results of anisotropic rock damage analysis, blasting pressure was the most influential parameter. Anisotropic rock damage area in horizontal direction was approximately 34% larger and about 12% smaller in vertical direction comparing with isotropic rock damage area. Isotropic rock damage area under fully coupled charge condition was around 30 times larger than that under decoupled charge condition. Blasting pressure under fully coupled charge condition was estimated to be more than 10 times larger than that of decoupled charge condition.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.8
• /
• pp.808-817
• /
• 2011

Because of its elevated cellulolytic activity, the filamentous fungus Trichoderma harzianum has a considerable potential in biomass hydrolysis applications. Trichoderma harzianum cellobiohydrolase I (ThCBHI), an exoglucanase, is an important enzyme in the process of cellulose degradation. Here, we report an easy single-step ion-exchange chromatographic method for purification of ThCBHI and its initial biophysical and biochemical characterization. The ThCBHI produced by induction with microcrystalline cellulose under submerged fermentation was purified on DEAE-Sephadex A-50 media and its identity was confirmed by mass spectrometry. The ThCBHI biochemical characterization showed that the protein has a molecular mass of 66 kDa and pI of 5.23. As confirmed by smallangle X-ray scattering (SAXS), both full-length ThCBHI and its catalytic core domain (CCD) obtained by digestion with papain are monomeric in solution. Secondary structure analysis of ThCBHI by circular dichroism revealed ${\alpha}$- helices and ${\beta}$-strands contents in the 28% and 38% range, respectively. The intrinsic fluorescence emission maximum of 337 nm was accounted for as different degrees of exposure of ThCBHI tryptophan residues to water. Moreover, ThCBHI displayed maximum activity at pH 5.0 and temperature of $50^{\circ}C$ with specific activities against Avicel and p-nitrophenyl-${\beta}$-D-cellobioside of 1.25 U/mg and 1.53 U/mg, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.557-564
• /
• 2000

This study is aimed to develop the adsorbent which can effectively remove toxic hydrophobic organic compounds from the aqueous phase. The emphasis was made to elucidate the adsolubilization behavior of sparingly soluble organic compounds (SSOCs) into the cetyltrimetylammonium bromide(CTAB) layer formed on anthracite by the partition coefficient. The amount of SSOCs removed from aqueous solution was increased with increase of the amount of CTAB coated on the surface and wich increase of SSOCs's hydrophobicity. With the surface-modified solid shown in above. chloroform and benzene at the initial concentration of $6{\times}10^{-4}M$ were removed over 95%. Experimentally determined partition coefficient($K_d$) values between organo-anthracite and organics were 4~25 times higher than theoretical $K_d$ values of same organics Organo-anthracite formed by the addition of the CTAB can effectively immobilize organic contaminants dissolved in landfill leachate and can also be applicable to wastewater treatment containing toxic hydrophobic organic compounds such as chloroform and benzene.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.537-544
• /
• 2017

An experimental study was carried out to investigate the characteristics of the propagation distance of a flood wave considering the levee failure speed in a flat inundation area. The Ritter solution for one dimensional flow was considered to formulate the experimental results and a representative form with coefficients of k and m, which consider the three dimensional flow characteristics, was applied. The experiments showed that the propagation velocity of the wave front in the inundation area was influenced by the levee breach speed as well as the initial water level, which is a significant variable representing the flood wave behavior. In addition, coefficients k and m are not constants, but variables that vary with levee breach speed. An empirical formula was also suggested using the experimental results in the form of the relationships between k and m. In this study, a large-scale experiment for flood inundation was carried out to examine the behavior of flooding in the inundated area and the relationships between the levee breach speed and wave-front propagation velocity were suggested based on the experimental results. These research results are expected to be used as the baseline data to draw a flow inundation map, establish an emergency action plan, and verify the two-dimensional numerical model.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.5
• /
• pp.436-445
• /
• 1986

As the second part of the studies on the utilization of polyunsaturated lipids in sardine oil as nutritional or medical supplement, the conditions of lipid extration and concentration, refining, and storage stability of EPA-condensed sardine oil were investigated. In extraction of lipids, solvent ratios of chloroform-methanol mixture(2:1 v/v) affected the final content of unsaturated lipid in extracted oil and recovery. Stepwise solvent fractionation method at various low temperatures was effective to concentrate polyenoic acids like EPA and DHA when acetone or acetone-methanol mixture, added in the ratio of 1:5 (v/v) was applied step by step to different temperatures at 0 to $-35^{\circ}C$. Addition of 1 to $5\%$ (v/v) of water to acetone was also benefit to raise EPA content but that resulted in reducing the yield of condensed oil from $65\%\;to\;28\%$. Concentration rate of polyenoic acids by solvent fractionation in lipid-actone solution (1:5, v/v) at 0 to $-30^{\circ}C$ seemed limited to $5{\sim}8\%$ in fatty acid composition depending on the initial content of those polyenoic acids in the sardine oil. During the extraction, concentration, and alkaline treatment, oxidation was rapidly induced but oxidation products could be thoroughly removed on the process of deceleration and peroxide elimination. To stabilize the reactive polyenoic acid condensed oil during the storage, stuffing nitrogen gas was essential to expel dissolved oxygen in oil or to seal the oil from open air, and the addition of antioxidative agents as BHA and tocopherols were greatly helpful to extend the storage life.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.723-730
• /
• 2011

In this experiment, persulfate, a strong oxidant for ISCO (In-Situ Chemical Oxidation) was used to degraded RDX in artificial ground water at ambient temperature. Results of RDX degradation by persulfate in a batch reactor showed that the oxidation reaction was pseudo first order with estimated Ea (activation energy) of $1.14{\times}10^2kJ/mol$ and the rate was increased with the increase of reaction temperature. The oxidation of RDX by persulfate increased slightly with the increase of initial solution pH from 4 to 8. The RDX oxidation rate increased 13 times at pH 10 compared with that at pH 4, however, alkaline hydrolysis was found to be the main reaction of RDX degradation rather than oxidation. The study also showed that the oxidation rate of RDX by persulfate was linearly dependent upon the molar ratios of persulfate to RDX from 5 : 1 up to 100 : 1, with a proportion constant of $4{\times}10^{-4}$ ($min^{-1}$/molar ratio) at $70^{\circ}C$. While NOM (Natural Organic Matter) exerted negative effects on the oxidation rate of RDX by persulfate, with a proportion constant of $1.21{\times}10^{-4}$ ($min^{-1}{\cdot}L/mg-NOM$) at $70^{\circ}C$ and persulfate/NOM molar ratio of 10/1. The decrease in RDX oxidation rate was linearly dependent upon the added NOM concentration. However, the estimated activation energy in the presence of 20 mg-NOM/L was within 3.3% error compared to that without NOM, which implies the addition of NOM does not alter intrinsic oxidation reaction.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.714-721
• /
• 2010

This research was undertaken to evaluate the feasibility of lanthanum hydroxide for fluoride removal from aqueous solutions. A batch sorption experiments were conducted to study the influence of various factors such as pH, contact time, initial fluoride concentration and temperature on the sorption of fluoride on lanthanum hydroxide. The optimum fluoride removal was observed in the $pH_{eq}{\leq}8.8$. Sorption equilibrium of fluoride on lanthanum hydroxide was better described by the Freundlish isotherm model than by the Langmuir isotherm model. The adsorption energy obtained from D-R model was 9.21 kJ/mol indicating an ion-exchange process as primary adsorption mechanism. The pseudo-second-order kinetic model described well the experimental kinetic data. Thermodynamic parameters such as ${\Delta}Go^{\circ}$, ${\Delta}H^{\circ}$ and ${\Delta}S^{\circ}$ indicated that the nature of fluoride sorption is spontaneous and endothermic. The used lanthanum hydroxide could be regenerated by washing with NaOH solution. Also, the results applied to real ground water indicate that fluoride selectivity and removal capacity of lanthanum hydroxide were superior to those of PA anion-exchange resin.