• 한국수산과학회지
• /
• 제15권3호
• /
• pp.226-232
• /
• 1982

낚시 어구 재료의 규격을 정하는데는 우선 낚시에 물련 고기가 순간적으로 잡아채는 충기하중, 피로하중 등을 기본적으로 고려하여야 할 것이다. 본 실험은 부산수산대학 양어장에서 잉어가 낚시에 물렸을 때 미치는 힘을 strain gauge를 사용하여 측정하고 아울러 꼬리 진동 측정장치를 만들어 꼬리의 진동과 힘의 변화를 동시에 기록하여 분석해 보았다. 잉어가 낚시에 물렸을 때 미치는 최대의 힘 $F_m$은 고기의 체중 W에 따라$$F_m=3.23W+105$$로 나타났다. 시간 $t_n$에 대한 최대의 힘의 변화 $F_n$은 $$F_n=a_n(|t_n|+C)^{-b}_n$$ (단, $$C=(\frac{a_n}{F_m})^\frac{1}{b_n} -10T/2{\leq}t_n{\leq}10T/2$$)에서 $a_n=0.27W-6.52$이고 $b_n$은 평균 2.10이며 주기는 체중에 따라 T=0.000385W+0.193으로 주어진다. 잉어가 낚인 직후부터의 시간 t에 따라 꼬리 진동에 의한 각 Peak점의 힘의 크기 $F_p$는$$F_p=(2.23W+105)e^{-{\beta}t}+W$$로 표시되는데, 낚시에 물린 초기단계에서는 지적지수 $\beta$가 거의 0에 가까우나 마지막 단계에서는 체중에 관계없이 평균 1.7정도 되었다. 또한, 잉어가 미치는 힘의 가 peak 점간의 주기는 재리 진동의 주기와 서로 밀접한 상관 관계가 있었다.

• 한국지반환경공학회 논문집
• /
• 제10권7호
• /
• pp.25-32
• /
• 2009

본 연구는 팽창질석을 사용하여 수용액 상의 구리이온 흡착 제거능을 평가 하고자 하였다. 질석의 화학적 조성분석은 XRF, 구리이온 농도분석은 UV-VIS를 각각 사용하여 이루어졌다. 수용액 상의 구리이온의 제거양상을 살펴보기 위해 batch kinetic test와 batch sorption test가 실시되었고, 그 결과 구리의 제거속도($K_{obs}$, 1/hr)는 초기pH 3일때 0.73, pH 4일때 1.52, pH 5일때 1.71였고 초기농도가 $1mg\;L^{-1}$ 일때 3.19, 5일때 1.90, 10일때 0.73으로 초기구리농도와 반비례하고 초기 pH와는 비례하여 증가하는 양상을 보였다. 하지만 초기용액의 농도차이보다 초기pH의 영향이 지배적일 것이라는 예상하에 동일한 농도에 pH만 달리하여 실험해본 결과 역시 예상대로 pH에 따라 제거속도가 크게 차이남을 알 수 있었다. 최종적으로 batch sorption test를 통해 얻은 결과를 각각 Freundlich와 Langmuir 등온흡착식에 대입한 결과 두 식 모두 양호한 fitting 결과를 얻을 수 있었으나 Freundlich 식의 결정계수가 0.965로 Langmuir 식의 결정계수 0.936보다 좀 더 높게 나타나 좀 더 정확한 fitting 결과를 보여주었다. Langmuir 모델로부터 얻은 최대흡착용량($Q_{max}$), Freundlich 모델의 분배계수, n 값은 각각 $1,250mg\;kg^{-1}$, $635.1L\;kg^{-1}$, 1.69였다. 이러한 결과는 팽창질석이 다양한 형태의 수용액 상에 존재하는 구리이온을 효과적으로 제거할 수 있음을 보여준다.

• Journal of Information Display
• /
• 제5권3호
• /
• pp.30-34
• /
• 2004

Fabrications of barrier layer on a polyethersulfon (PES) film and OLED based on a plastic substrate by atomic layer deposition (ALD) have been carried out. Simultaneous deposition of 30 nm of $AlO_x$ film on both sides of PES film gave film MOCON value of 0.0615 g/$m^2$/day (@38$^{\circ}C$, 100 % R.H.). Moreover, the double layer of 200 urn $SiN_x$ film deposited by PECVD and 20 nm of $AlO_x$ film by ALD resulted in the MOCON value lower than the detection limit of MOCON. The OLED encapsulation performance of the double layer have been investigated using the OLED structure of ITO/MTDATA(20 nm)/NPD(40 nm)/AlQ(60 nm)/LiF(1 nm)/Al(75 nm) based on the plastic substrate. Preliminary life time to 91 % of initial luminance (1300 cd/$m^2$) was 260 hours for the OLED encapsulated with 100 nm of PECVD deposited $SiN_x$/30 nm of ALD deposited $AlO_x$.

• 대한가정학회지
• /
• 제23권2호
• /
• pp.37-43
• /
• 1985

The effect of irradiation at dose of 3~10 kGy on the extension of the shelf-life of sliced dried squid and dried file and on its quality were investigated during nine months of storage at room temperature. The number of microorganisms, TBA value and TMA-N content were used as objective indices concerned to the sensory evaluation. In the number of initial microbial loading, total bacterial count of sliced dried squid and dried file fish were $2.7{\times}10^{8}\;and\;2.0{\times}10^{5}$, yeast and mold were $5.7{\times}10^{5}\;and\;6.2{\times}10^{5}$ and coliform group were $2.1{\times}10^{5}$ and above 10 per gram of the samples, respectively. The number of total bacteria was sterilized by 99% with irradiation of 3~10 kGy and irradiation of above 7 kGy was shown to be effective for the radurization of yeast, mold and coliform group. TBA value of irradiated groups were higher than storage time. The TMA-N content of nonirradiated group was markedly increased by microbial spoilage during storage, however above 8 kGy irradiated group were indicated about 10 mg% after nine months storage. In the sensory evaluation, the nonirradiated group was off favor after three months storage and was changed in color of dried fishes but 7~10 kGy irradiated group were maintained good qualit compared with those of fresh samples after nine months storage at room temperature.

• 한국환경과학회지
• /
• 제28권7호
• /
• pp.629-637
• /
• 2019

The purpose of this study was to evaluate the effect of high-salinity wastewater on the microbial activity of Aerobic Granule Sludge (AGS). Laboratory-scale experiments were performed using a sequencing batch reactor, and the Chemical Oxygen Demand (COD), nitrogen removal efficiency, sludge precipitability, and microbial activity were evaluated under various salinity injection. The COD removal efficiency was found to decrease gradually to 3.0% salinity injection, and it tended to recover slightly from 4.0%. The specific nitrification rate was 0.043 - 0.139 mg $NH_4{^+}-N/mg$ $MLVSS{\cdot}day$. The specific denitrification rate was 0.069 - 0.108 mg $NO_3{^-}-N/mg$ $MLVSS{\cdot}day$. The sludge volume index ($SVI_{30}$) ultimately decreased to 46 mL/g. The specific oxygen uptake rate decreased from an initial value 120.3 to a final value 70.7 mg $O_2/g$ $MLVSS{\cdot}hr$. Therefore, salinity injection affects the activity of AGS, causing degradation of the COD and nitrogen removal efficiency. It can be used as an indicator to objectively determine the effect of salinity on microbial activity.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.1-8
• /
• 2003

Wastes such as shredder dust of disposed vehicles can be decomposed into low calorific flammable gases by Pyrolysis gasification. A stationary electric Power generation using an internal combustion engine fuelled with the waste-pyrolysis gas is an effective way to ease both waste management and energy saving issues. The waste-pyrolysis gas mainly consists of H$_2$, CO, $CO_2$ and $N_2$. The composition and heating value of the gas generated depend on the conversion process and the property of the initial waste. This research analyzed the characteristics of the combustion and the exhaust emissions in a premixed charge spark ignition engine fuelled with several kinds of model gases, which were selected to simulate the pyrolysis-gases of automobile shredder dusts. The influences of the heating value and composition of the fuel were analyzed parametrically. Furthermore, optical analyses of the combustion flame were made to study the influence of the fuel's inert gas on the flame propagation.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.32-43
• /
• 1997

Abstract A series of permeability tests was performed on the mixtures with specific mixing rates of sand and bentonite using modified rigid-wall permeameter. Sand-bentonite mixtures were permeated by organics, ethanol and TCE. Permeability of bentonite with several mixing rates had a tendency to decrease up to initial one pore volume and permeability was thereafter converged to a constant value. When sand-bentonite mixtures was permeated by water, permeability was decreased at the beginning but it was thereafter converged to a constant. Among several mixing rates, permeability was greatly decreased at 15% of mixing rate. When sand-bentonite mixtures with 15% mixing rate was permeated by ethanol, permeability was about 10 times larger value than permeability of water. Peameability was shown greater values when permeated by TCE (TrichloroEthylene) followed by ethanol. Suitable mixing rate of sand-bentonite for a liner of waste landfills was detected.

• 한국정보통신학회논문지
• /
• 제6권3호
• /
• pp.481-486
• /
• 2002

본 논문에서는 카오스에 기반을 툰 ELM(Expanding Logistic Map) 암호화 알고리즘을 개선하기 위해 CELM(Cascade ELM)을 제안한다. 제안된 암호화 알고리즘은 3차 방정식에 기반을 둔 ELM 의 차수를 증가시켜 키의 범위를 확대하고, 서로 다른 Key 값과 초기 값의 함수를 Cascade 연결한 것으로 시뮬레이션결과 키의 랜덤성이 보장되면서 안정성이 국제 기준에 부합됨을 알 수 있었다.

• Journal of applied mathematics & informatics
• /
• 제15권1_2호
• /
• pp.265-275
• /
• 2004

In this paper, multi-objective models for designing 3D trajectory of horizontal wells are developed in a fuzzy environment. Here, the objectives of minimizing the length of the trajectory and the error of entry target point are fuzzy in nature. Some parameters, such as initial value, end value, lower bound and upper bound of the curvature radius, tool-face angle and the arc length of each curve section, are also assumed to be vague and imprecise. The impreciseness in the above objectives have been expressed by fuzzy linear membership functions and that in the above parameters by triangular fuzzy numbers. Models have been solved by the fuzzy non-linear programming method based on Zimmermann [1] and Lee and Li [2]. Models are applied to practical design of the horizontal wells. Numerical results illustrate the accuracy and efficiency of the fuzzy models.

• Journal of Ginseng Research
• /
• 제18권1호
• /
• pp.60-65
• /
• 1994

Fresh ginseng of same grade was stored under the 4$\pm$1$^{\circ}C$ and 87~92% RH for 10 weeks. During the storage, an aliquot amount of the ginseng was drawn, freeze dried and chemical constituents and physicochemical parameters were measured. After 10 weeks of storage drying rate and shrinkage of ginseng were 1520% and 9.04%, respectively, mold growth was seen at week 5 and observed for 51.2% of the ginseng week 10. Amylase activity level was elevated at the early stage of storage and decreased to 5% of initial value at week 5. At week 5, the elevated amylase activity was inconcomitant with the appearance of the mold growth. Crude protein contents were increased and decreased, respectively 5 week post storage. No significant changes in crude fat, crude fiber, ash, total sugar, n-butanol extract and ginsenoside were observed. The content of water-extractable substance showed maximum at week 7 to 8. The value of pH was slightly elevated and reducing sugar was increased during the storage. Key words Ginseng storage, physicochemical properties, drying rate, shrinkage, amylase activity.