• 대한전기학회논문지:전력기술부문A
• /
• 제54권6호
• /
• pp.315-322
• /
• 2005

In this article, 1 would like to explore the estimation method of time-varying voltage sags in large industrial systems considering the short circuit contributions of rotating machines. For the power distribution system of KEPCO(Korea Electric Power Corporation), the magnitude of initial symmetrical short circuit current is generally not changed. However, in industrial systems which contain a number of rotating machines, the magnitude of voltage sag is generally changed from the initial to the clearing time of a fault due to the decreasing contribution of rotating machines for a fault current. The time-varying characteristics of voltage sags can be calculated using a short circuit analysis that is considered the time-varying fault currents. For this, the prediction formulations of time-varying voltage sags are proposed using a foreign standard. The proposed method contains the consideration of generator and motor effects. For the test of proposed formulations, a simple system of industrial consumer is used for the comparison conventional and proposed estimation method of voltage sag characteristics.

• 센서학회지
• /
• 제33권2호
• /
• pp.98-104
• /
• 2024

This study proposes a method to overcome the limited detection range of short-baseline stereo cameras (SBSCs). The proposed method includes two steps: (1) predicting an unscaled initial depth using monocular depth estimation (MDE) and (2) adjusting the unscaled initial depth by a scale factor. The scale factor is computed by triangulating the sparse visual keypoints extracted from the left and right images of the SBSC. The proposed method allows the use of any pre-trained MDE model without the need for additional training or data collection, making it efficient even when considering the computational constraints of small platforms. Using an open dataset, the performance of the proposed method was demonstrated by comparing it with other conventional stereo-based depth estimation methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1768-1769
• /
• 2011

The nonlinear estimation and the pseudo-linear estimation are used to treat the target localization in sensor network which provides range difference of arrival (RDOA) measurements. It is known that the nonlinear estimation has sensitive problem for the initial estimate and the pseudo-linear estimation has a large estimation error. The QCLS method is the typical estimator of the methods for pseudo-linear estimation. However the estimate by using the QCLS method includes the estimation error because the first stage of two estimation processes of the QCLS method causes the biased estimation error. Therefore we propose a instrumental variables(IV) method for minimizing the estimation error of the first stage. The simulation shows that the performance of the proposed method is superior to the QCLS method.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.408-412
• /
• 2009

In this paper, a new efficient algorithm for global motion estimation is proposed. This algorithm uses a previous 4-parameter model based global motion estimation algorithm and M-estimator for improving the accuracy and robustness of the estimate. The first algorithm uses the block based motion vector fields and which generates a coarse global motion parameters. And second algorithm is M-estimator technique for getting precise global motion parameters. This technique does not increase the computational complexity significantly, while providing good results in terms of estimation accuracy. In this work, an initial estimation for the global motion parameters is obtained using simple 4-parameter global motion estimation approach. The parameters are then refined using M-estimator technique. This combined algorithm shows significant reduction in mean compensation error and shows performance improvement over simple 4-parameter global motion estimation approach.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.622-627
• /
• 2019

본 논문에서는 비대칭 공극을 갖는 단상 영구자석 동기 전동기의 센서리스 운전을 위한 초기 회전자 위치 검출 알고리즘을 제안한다. 일반적인 센서리스 운전 기법 중 역기전력 기반의 센서리스 제어는 영속 및 저속운전에서 역기전력 정보를 추정하기 어렵다. 이를 위해 오픈 루프 기동 기법이 필수적으로 요구되고 일정한 방향으로의 회전을 위해서는 회전자의 초기 위치 검출이 반드시 필요하다. 본 논문에서는 단상 영구자석 동기 전동기의 자기적 특성을 이용하여 고주파 전압 주입 신호에 옵셋 전압을 추가하여 회전자 자극을 검출하는 기법을 제안한다. 다수의 실험 결과를 통하여 제안된 알고리즘의 유효성과 유용성을 검증하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권1호
• /
• pp.24-36
• /
• 2011

A new approach for spacecraft absolute attitude estimation based on the unscented Kalman filter (UKF) is extended to relative attitude estimation and navigation. This approach for nonlinear systems has faster convergence than the approach based on the standard extended Kalman filter (EKF) even with inaccurate initial conditions in attitude estimation and navigation problems. The filter formulation employs measurements obtained from a vision sensor to provide multiple line(-) of(-) sight vectors from the spacecraft to another spacecraft. The line-of-sight measurements are coupled with gyro measurements and dynamic models in an UKF to determine relative attitude, position and gyro biases. A vector of generalized Rodrigues parameters is used to represent the local error-quaternion between two spacecraft. A multiplicative quaternion-error approach is derived from the local error-quaternion, which guarantees the maintenance of quaternion unit constraint in the filter. The scenario for bounded relative motion is selected to verify this extended application of the UKF. Simulation results show that the UKF is more robust than the EKF under realistic initial attitude and navigation error conditions.

• 대한토목학회논문집
• /
• 제29권5D호
• /
• pp.563-570
• /
• 2009

본 연구는 신호교차로 분석시 추가지체 산정을 위하여 적용하는 초기 대기차량이 총 지체도에 얼마나 영향을 미치는지 분석하기 위한 목적으로 실시하였다. 평균교차로 지체시간을 측정하기위하여 통과차량과 대기행렬이 측정되었다. 분석결과, 시험차량의 평균 지체도가 60초/대 미만 일 경우에는 세가지 지체도 산정방법이 모두 유사한 것으로 분석되었으나, 60~70초/대는 초기 대기차량을 적용한 지체도만 시험차량의 평균지체도와 유사한 것으로 분석되었다.

• 방사성폐기물학회지
• /
• 제21권3호
• /
• pp.303-313
• /
• 2023

Spent fuels (SFs) are stored in a storage pool after discharge from nuclear power plants. They can be transferred to for the further processes such as dry storage sites, processing plants, or disposal sites. One of important measures of SF is the burnup. Since the radioactivity of SF is strongly dependent on its burnup, the burnup of SF should be well estimated for the safe management, storage, and final disposal. Published papers about the methodology for the burnup estimation from the known activities of important radioactive sources are somewhat rare. In this study, we analyzed the dependency of the burnup on the important radiation source activities using ORIGEN-ARP, and suggested simple correlations that relate the burnup and the important source activities directly. A burnup estimation equation is suggested for PWR fuels relating burnup with total neutron source intensity (TNSI), initial enrichment, and cooling time. And three burnup estimation equations for major gamma sources, ¹³⁷Cs, ¹³⁴Cs, and ¹⁵⁴Eu are also suggested.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.26-32
• /
• 1994

The Lloyd-Max algorithm is an iterative scheme for design of the minimum mean square error quantizer. It is very simple in concept and easy to program into a computer. However its convergence and accuracy are primarily dependent upon the accuracy of the initial parameter. In this paper, a new initial parameter which converges to a specific value when the number of output levels becomes large is selected. And an estimator using curve fitting techique is suggested. In addition, performance of the proposed method is shown to be superior to that of the existing methods in accuracy and convergence.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.224-228
• /
• 1994

This paper deals with a Batch processor application to determine orbit trajectories from satellite tracking data. The purpose of this paper is to find the initial state vectors. In order to determine the better estimation process, several different cases are compared. Here we adapt a minimum variance concept to develop estimation and prediction techniques. These results are compared with by SEP, Spherical Error Probable, values.