• 한국지능시스템학회논문지
• /
• 제11권5호
• /
• pp.373-378
• /
• 2001

본 연구에서의 다봉성 함수의 최적화를 위한 향상된 유전알고리듬을 제안하였다. 이 방법은 2개의 주요 단계로 구성된다. 첫째 단계는 유전알고리듬과 함수인정기준을 이용한 전역탐색단계이다. 초기해 집단에 대한 개체군의 소속도를 함수인정기준에 따라 결정한다. 둘째 단계는 개체군과 탐색최적해 사이의 유사도를 결정하고, 재구성된 탐색공간에서 단일점 탐색법에 의해 최적해를 탐색한다. 4개의 시험함수를 이용한 수치 예에 대해 종래의 방법과의 비교를 통하여 제안된 알고리듬이 모든 전역최적해 뿐만 아니라 국부최적해도 탐색이 가능함을 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 제5회 박판성형 SYMPOSIUM
• /
• pp.68-71
• /
• 2006

Traditional section-based method develops blank along section planes and find trimming line by generating loop of end points. This method suffers from inaccurate results for regions with out-of-section motion. In this study, new fast method to find feasible trimming line is proposed. One step FEM is used to analyze the flanging and incremental development method is proposed to handle bad-shaped mesh and undercut part. Also in order to remedy mesh distortion during development, energy minimization technique is utilized. The proposed method is verified by shrink/stretch flange forming and successfully applied to the complex industrial applications such as door outer flanging process.

• Nutrition Research and Practice
• /
• 제8권5호
• /
• pp.595-601
• /
• 2014

BACKGROUND/OBJECTIVES: Educational interventions targeted food selection perception, knowledge, attitude, and behavior. Education regarding irradiated food was intended to change food selection behavior specific to it. SUBJECTS AND METHODS: There were 43 elementary students (35.0%), 45 middle school students (36.6%), and 35 high school students (28.5%). The first step was research design. Educational targets were selected and informed consent was obtained in step two. An initial survey was conducted as step three. Step four was a 45 minute-long theoretical educational intervention. Step five concluded with a survey and experiment on food selection behavior. RESULTS: As a result of conducting a 45 minute-long education on the principles, actual state of usage, and pros and cons of irradiated food for elementary, middle, and high-school students in Korea, perception, knowledge, attitude, and behavior regarding the irradiated food was significantly higher after the education than before the education (P < 0.000). CONCLUSIONS: The behavior of irradiated food selection shows high correlation with all variables of perception, knowledge, and attitude, and it is necessary to provide information of each level of change in perception, knowledge, and attitude in order to derive proper behavior change, which is the ultimate goal of the education.

• Physical Therapy Rehabilitation Science
• /
• 제11권2호
• /
• pp.215-223
• /
• 2022

Objective: This study was to resolve the limitations of the experimental environment and to solve the shortcomings of the method of measuring human gait characteristics using optical measuring instruments. Design: A cross-sectional study. Methods: Fifteen healthy adults without a history of orthopedic surgery on the lower extremities for the past 6 months were participated. They were analyzed gait variables using the smart guide and the 3D image analysis at the same time, and their results were compared. Visual-3D was used to calculate the analysis variables. Results: The reliability and validity of the data according to the two measuring instruments were found to be very high; gait speed(0.85), cycle time(0.99), stride time of both feet(0.98, 0.97) stride legnth of both feet(0.86, 0.88) stride per minute of both feet(0.99, 0.96), foot speed of both feet(0.90, 0.91), step time of both feet(0.77, 0.71), step per minute(0.72, 0.74), stance time of both feet(0.96, 0.97), swing time of both feet(0.93, 0.79), double step time(0.81), initial double step time(0.84) and terminal step time(0.76). Conclusions: In the case of the smart insole, which measures human gait variables using the pressure sensor and inertial sensor inserted in the insole, the reliability and validity of the measured data were found to be very high. It can be used as a device to replace 3D image analysis when measuring pathological gait.

• Smart Structures and Systems
• /
• 제32권6호
• /
• pp.383-391
• /
• 2023

Energy harvesting in trams may become a prevalent source of passive energy generation due to the high density of vibrational energy, and this may help power structural health monitoring systems for the trams. This paper presents a broadband vibrational energy harvesting device design that utilizes a varied frequency from a tram vehicle using a 2 DOF vibrational system combined with electromagnetic energy conversion. This paper will demonstrate stepwise optimization processes to determine mechanical parameters for frequency tuning to adjust to the trams' operational conditions, and electromagnetic parameters for the whole system design to maximize power output. The initial optimization will determine 5 important design parameters in a 2 DOF vibrational system, namely the masses (m₁, m₂ (and spring constants (k₁, k₂, k₃). The second step will use these parameters as initial guesses for the second optimization which will maintain the ratios of these parameters and present electrical parameters to maximize the power output from this system. The obtained values indicated a successful demonstration of design optimization as the average power generated increased from 1.475 mW to 17.44 mW (around 12 times).

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.295-298
• /
• 2008

The major function of the nacelle cover is protecting the inside equipments. Therefore, it is required not only sufficient strength and stability but also light weight. In this paper, design loads are calculated according to the GL Wind guideline Ed. 2003. To ensure the structural safety, a composite structure is selected. The structural design is processed by two steps which are preliminary design and detail design. In the preliminary design step, a structural analysis is performed with initial thickness, 5mm. As reviewing above analysis results, weak regions of the nacelle cover reinforced using the spar cap structure which is same as the blade structure. In the analysis model, the support structure is connected with the nacelle cover and analyzed its structural safety at the same time.

• 한국BIM학회 논문집
• /
• 제5권1호
• /
• pp.25-34
• /
• 2015

In the initial step of BIM based architectural design process, workloads are increased and the decision making process becomes more complex than those of the conventional design process. Technologies regarding distribution, exchange, classification, verification of BIM data are fundamental elements of construct environment for information sharing based on BIM. Interoperability of BIM model data is another issue to integrate BIM model. To improve interoperability in BIM-based collaboration, a model for utilizing formal&unformal design informations is suggested. Futhermore, Prototyping the model and practical test is conducted for advancement of data exchange making design data richen.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.897-905
• /
• 2006

This study considers an experimental design of disturbance compensation control to improve stabilization performance of main battle tanks. An adaptive non-parametric design technique based on the Filtered-x Least Mean Square(FXLMS) algorithm is applied in the consideration of model uncertainties. The optimal compensator is designed by two-step design procedures: determination of frequency response function of the disturbance compensator which can cancel the disturbance of series of single harmonics by using the FXLMS algorithm and determination of the compensator polynomial which can fit the frequency response function obtained in the first step optimally by using a curve fitting technique. The disturbance compensator is applied to a simple experimental gun-torsion bar-motor system which simulates gun driving servo-system. Along with experimental results, the feasibility of the proposed technique is illustrated. Experimental results demonstrate that the proposed control reduces the standard deviation of stabilization error to 47.6% that by feedback control alone. The directional properties of the FXLMS Algorithm such as the direction of convergence and its convergence speed are also verified experimentally.

• 대한조선학회논문집
• /
• 제33권1호
• /
• pp.182-188
• /
• 1996

선형 설계는 concurrent ship design의 첫단계로서, 조선 CIM 시스템 구축을 위해 매우 중요하다. 본 논문에서는 이러한 인식하에 CIM 개념에 입각한 초기 설계 단계에서의 선형 설계 업무와 기능에 대하여 정리하였다. 그리고, 상용 3D-CAD 시스템을 이용한 선형 설계 시스템(DWHULL)을 개발하였다. 결론 부에서는 향후 개발 방향 및 시스템 보완 사항을 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.652-656
• /
• 2004

Crashworthy design of trains is now indispensable procedure in modern railway vehicle design for ensuring the safety of Passengers and crew. It is now widely recognized that a more strategic approach is needed in order to absorb higher level energy in a controlled manner and minimize passenger injuries effectively. The first design step in this strategic approach is the design of the front end structure(so called HE extremities) to absorb a large part of total impact energy and then the structure of passengers non-accommodation zones(so called LE extremities) is designed to absorb the rest of impact energy. In this paper, the passengers entrance door area is selected as the LE(low energy) extremities and the design of the LEE was carried out. The main part of LEE design procedures is the design of energy absorbing tubes. For this purpose, the several tube candidates are introduced and compared to each others with numerical crash simulation.