• 한국철도학회논문집
• /
• 제20권5호
• /
• pp.625-636
• /
• 2017

본 연구는 프리캐스트 콘크리트궤도의 온도 변화에 따른 거동과 초기 변형 특성을 규명하고, 궤도 슬래브의 초기 변형과 온도 경사에 의한 변형이 열차하중에 의한 슬래브의 응력 분포에 미치는 영향을 고찰하는 것을 목적으로 한다. 본 논문은 2개의 논문 중 첫 번째 논문으로 이 논문에서는 프리캐스트 콘크리트궤도의 변형과 응력을 계산할 수 있는 유한요소 해석모델을 제시하였으며, 현장에 부설된 프리캐스트 콘크리트궤도에서 측정한 온도 분포와 변위를 해석 결과와 비교하였다. 분석 결과에 따르면 초기 변형에 의해 슬래브는 항상 상방향 컬링(curl-up)이 있는 상태에 있고, 측정된 깊이별 온도를 입력으로 하여 구한 슬래브 수직 변위와 계측 변위를 비교하면 초기 변형에 상응하는 슬래브 상하부 온도차, 즉 유효 내재 온도차(EBITD)를 결정할 수 있으며, EBITD를 적절히 가정하면 해석 변위와 계측 변위가 잘 일치하는 것으로 나타났다.

• 한국공간구조학회논문집
• /
• 제4권4호
• /
• pp.129-136
• /
• 2004

Almost the steel bridges are manufactured and constructed by using weld process. The welding is necessary for connecting the flange, web and stiffener of steel bridges. However, residual stress and welding deformation producted by welding is a causes of decreasing the load carrying capacity of steel bridges. therefore, it is need to consider the initial stresses by welding when design the steel bridge. However, the influence of initial stress producted by welding on load carrying capacity of steel bridges is not elucidated. In this paper, the initial stress state on the flange, web and stiffener of steel bridges are clarified by carrying out 3-dimensional non-steady heat conduction analysis and 3-dimensional thermal elastic-plastic analysis. The influence of initial stress by welding on load carrying capacity of steel bridges is clarified by carrying out 3-dimensional elastic-plastic finite element analysis using finite deformation theory.

• 한국강구조학회 논문집
• /
• 제14권4호
• /
• pp.539-547
• /
• 2002

사장교의 정확한 초기형상을 결정하기 위한 초기평형상태 해석법으로 케이블 장력에 큰 영향을 미치는 축방향 변형을 고려한 반복해석 알고리즘을 제시하였다. 해석의 정확성과 수렴성을 향상시키기 위해 매개변수 해석을 통해 케이블 장력의 초기값을 간단하게 결정할 수 있는 방법을 제안하였으며, 3차원 뼈대요속와 탄성현수선요소를 적용한 해석 프로그램을개발하여 사장교의 기하비선형 거동을 고려하였다. 실교량 모델을 포함한 해석 예제를 통하여 본 연구에서 제시한 해석 알고리즘의 정확성과 적용성을 검증하였다. 제안된 해석 알고리즘은 부재 제작시 측방향 변형을 제작 캠버량으로 반영하지 않는 경우나 시공중 발생하는 시공오차나 제작오차의 영향을 제거하기 위해 최종장력을 보정하는 경우에 유용하게 적용될 수 있다.

• Structural Engineering and Mechanics
• /
• 제19권1호
• /
• pp.73-96
• /
• 2005

For the spatially coupled free vibration analysis of shear deformable thin-walled non-symmetric curved beam subjected to initial axial force, an exact dynamic element stiffness matrix of curved beam is evaluated. Firstly equations of motion and force-deformation relations are rigorously derived from the total potential energy for a curved beam element. Next a system of linear algebraic equations are constructed by introducing 14 displacement parameters and transforming the second order simultaneous differential equations into the first order simultaneous differential equations. And then explicit expressions for displacement parameters are numerically evaluated via eigensolutions and the exact $14{\times}14$ dynamic element stiffness matrix is determined using force-deformation relations. To demonstrate the accuracy and the reliability of this study, the spatially coupled natural frequencies of shear deformable thin-walled non-symmetric curved beams subjected to initial axial forces are evaluated and compared with analytical and FE solutions using isoparametric and Hermitian curved beam elements and results by ABAQUS's shell elements.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2006년도 춘계 학술발표회 논문집 제3권1호(통권3호)
• /
• pp.214-223
• /
• 2006

Membrane structures, a kind of lightweight soft structural system, are used for spatial structures. The material property of the membrane has strong axial stiffness, but little bending stiffness. The design procedure of membrane structures are needed to do shape finding, stress-deformation analysis and cutting pattern generation. In shape finding, membrane structures are unstable structures initially. These soft structures need to be introduced initial stresses because of its initial unstable state, and happen large deformation phenomenon. Therefore, in this study, to find the structural shape after large deformation caused by initial stress, we need the shape analysis considering geometric nonlinear term. And we investigate the evaluation of shape analysis technique's convergence and efficiency according to the control method

• 한국철도학회논문집
• /
• 제20권5호
• /
• pp.637-648
• /
• 2017

본 논문에서는 이전 논문에서 제시한 불연속 프리캐스트 콘크리트궤도 유한요소 해석모델과 초기 변형 및 온도 변형 분석 결과를 이용하여 초기 변형과 온도에 의한 변형이 슬래브의 응력 분포에 미치는 영향을 분석하였다. 분석 결과에 따르면 프리캐스트 콘크리트 슬래브에 이미 발생해 있는 초기 변형과 온도 경사에 의한 변형이 있는 상태에서 열차하중이 작용하는 경우에는 슬래브 중앙, 모서리 중앙, 전단포켓 코너부 등 슬래브 상부에서 최대 인장응력이 발생하게 되어 열차하중만 작용하는 경우와 매우 다른 응력 분포를 나타낸다. 따라서 불연속 프리캐스트 콘크리트 궤도의 실제 취약부의 위치와 파괴모드를 예측하기 위해서는 슬래브의 초기 변형과 온도 변형을 고려하여 열차 하중에 의한 응력을 산정해야만 한다.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.21-28
• /
• 1999

In this paper, a finite element method for the determination of initial blank shape in sheet metal forming process will be introduced. The initial blank shape is determined by the only one step from the final to the initial blank. The used finite element inverse method adopted Henky's deformation theory, Hill's anisotropic yield criterion and simplified boundary conditions. Based on this theory. a three-dimensional membrane finite element code was developed. The developed code will be applied to several sheet metal forming examples for the demonstration of its validity.

• 열처리공학회지
• /
• 제33권1호
• /
• pp.1-12
• /
• 2020

In this study, thin foil fabrication using Ni/Ni₃Al single crystal was performed by cold-rolling. It was found that the cold-rolling behavior was strongly dependent on the initial crystallographic orientation rather than morphology of Ni₃Al precipitates. The deformation banding was formed in the case of (100)[001]- and (210)[001]-oriented specimens at 83% reduction in thickness. However, the effects of Ni₃Al precipitates morphology on the microstructure evolution of Ni/Ni₃Al single crystals during cold-rolling were not so serious comparing with the effects of initial crystallographic orientation. Therefore, it could be concluded that the deformation behavior of Ni/Ni₃Al single crystals at serious strain level was strongly dependent on the initial crystallographic orientation rather than the morphology of Ni₃Al precipitates, whereas the initial deformation behavior was related to both crystallographic orientation and the morphology of Ni₃Al precipitates.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.16-21
• /
• 2022

This study investigates the effect of the deformation on the sensitivity of a flexible polydimethylsiloxane (PDMS) membrane sensor. A PDMS membrane sensor was developed to measure the impact force of a water droplet using a silver nanowire (AgNW). The initial deformation of the membrane was confirmed with the application of a tensile force (i.e., tension) and fixing force (i.e., compressive force) at the gripers, which affects the sensitivity. The experimental results show that as the tension applied to the membrane increased, the sensitivity of the sensor decreased. The initial electrical resistance increased as the fixing force increased, while the sensitivity of the sensor decreased as the initial resistance increased. The movement of the membrane due to the impact force of the water droplet was observed with a high-speed camera, and was correlated with the measured sensor signal. The analysis of the motion of the membrane and droplets after collision confirmed the periodic movement of not only the membrane but also the change in the height of the droplet.

• 소성∙가공
• /
• 제16권6호
• /
• pp.467-472
• /
• 2007

In this study, the effects of initial texture on the twinning formation of AZ31 Mg rolled sheet was investigated. Uniaxial compression tests were carried out on samples cut along the normal direction(ND) and roiling direction(RD), respectively, of rolled AZ31 Mg alloy sheet at various temperatures (RT, 200, 250, 300, 350, $400^{\circ}C$) with the fixed strain rate($10^{-2}/s$). The results showed that deformation twining occurred actively only in the RD specimens, which promoted homogeneous deformation as compared to the ND specimens. The effect of temperature on the formation of deformation twins was also investigated, and the slip/twin transition temperature was found to be approximately $250^{\circ}C$.