• 한국산업융합학회 논문집
• /
• 제6권1호
• /
• pp.65-71
• /
• 2003

Infrared heating has been traditionally used in industrial applications for processes such as dehydration of food industrial. This heating method involves the application of radiation in the wavelength range of 5~50 micrometers. In this work, simultaneous heat balance equations were developed to simulate the infrared radiation heating of red peppers. The equations assume that moisture diffuses to the outer boundaries of the material in liquid form and evaporation occurs at the surface of the red peppers. Energy for moisture evaporation is supplied by the infrared radiant energy. The equations were validated with experimental data on surface temperature and average moisture content of red peppers. Average deviations of predicted surface red peppers temperature and average red peppers moisture from experimental data were 323~353K and 50~80%, respectively. The spectral extinction coefficients in the wavelength range $1.5<{\lambda}<27$ micrometer at 293K for Red Peppers were determined from results of reflection measurements and the four flux radiative heat transfer calculation. The radiation extinction coefficients were obtained from effective drying factor the temperature 373K.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.580-584
• /
• 2004

In the present study, an evaluation technology for heating channel layout was investigated in SMC molding system design. Conventional design rules of cooling channel in injection molding process were applied to the present work. Finite element thermal analysis with ANSYSTM was performed to evaluate the temperature distribution of mold surface. SMC mold was manufactured to test the effect of a proposed heating channel layout system on the temperature distribution of mold surface and infrared camera was applied to a measurement of temperature. It was shown that infrared camera application was possible in a measurement of temperature distribution on mold surface.

• 소성∙가공
• /
• 제27권2호
• /
• pp.87-92
• /
• 2018

Auto industries have tried to employ lightweight alloys to improve the fuel efficiency of manufactured vehicles, as the environmental concern becomes an important issue. Even though the aluminum alloy is one of the most appropriate lightweight alloys for auto parts, the low formability of an aluminum alloy has been an obstacle to its application. In order to resolve the low formability problem, a recent study (Lee et al., 2017 [1]) showed that the infrared (IR) local heat treatment can improve the formability with a reduction of heating energy. However, the aforementioned study was limited to only a linear line heating. Since many of the available auto parts as applicable to vehicle manufacturing have a curved line shape, the heating experiments for a curved line should be studied. The possibility of building IR lamps having complex shapes is an advantage of the IR lamp, since it can control the heating shape. This work conducted the IR local heat treatment for the curved line. The experimental results show that the IR local heat treatment can improve the formability of the aluminum alloy for curved line. Additionally, it is shown that the IR local heat treatment also reduces the heating energy when it is compared with the furnace heating which heats a blank as a whole. A numerical simulation with a stress-based forming limit diagram also supports the experimental results.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.448-452
• /
• 2006

Many kinds of electric heating appliance is used by user interface and desire. Far infrared ray heating system can use a kind of main heating appliance. This paper gives un saving amounts, energy curtailment money and payback period between far infrared ray heating system and existing electric heating appliance - EHP, electric air heater, electric radiator, electric floor heating system - from economy analysis.

• 디지털융복합연구
• /
• 제11권9호
• /
• pp.247-254
• /
• 2013

본 연구는 탄소 면상발열체를 퇴행성 슬관절염 환자에게 적용하여 통증과 기능정도를 알아보는 목적으로 시행되었다. 연구 대상자는 2010년 7월부터 2010년 9월까지 C지역에 세 기관에서 총 45명을 대상으로 실험하였다. 대조군(n=15, 여성노인, 무처치)과 기존 세라믹 원적외선군(n=15, 여성노인, 원적외선 적용), 탄소 면상발열체군(n=15, 여성노인, 탄소면상발열체 적용)로 분류하고 치료는 1주에 3회, 3주씩 총 9회 30분씩 원적외선을 양 무릎에 적용하였다. 평가는 실험 전, 실험 후, 3주 후에 측정하였다. 처치후 VAS, PPT, K-WOMAC으로 평가하였다. 연구 결과를 통해 탄소 면상발열체를 사용한 원적외선 온열치료가 퇴행성 슬관절염의 통증감소와 기능향상 효과를 보인바 향후 임상에서 퇴행성 슬관절염 환자에게 치료방법의 하나로 사용 될 것으로 생각된다.

• 센서학회지
• /
• 제14권5호
• /
• pp.337-342
• /
• 2005

A silicon-based micro-reactor to amplify small amount of deoxyribonucleic acid (DNA) has been fabricated using micro-electro-mechanical systems (MEMS) technology. Polymerase chain reaction (PCR) of DNA requires a precise and rapid temperature control. A Pt sensor is integrated directly in the chamber for real-time temperature measurement and an infrared lamp is used as external heating source for non-contact and rapid heating. In addition to the real-time temperature sensing, PCR needs a rapid thermocycling for effective PCR. For a fast thermal response, the thermal mass of the reactor chamber is minimized by removal of bulk silicon volume around the reactor using double-side KOH etching. The transparent optical property of silicon in the infrared wavelength range provides an efficient absorption of thermal energy into the reacting sample without being absorbed by silicon reactor chamber. It is confirmed that the fabricated micro-reactor could be heated up in less than 30 sec to the denaturation temperature by the external infrared lamp and cooled down in 30 sec to the annealing temperature by passive cooling.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.499-502
• /
• 2004

The temperature distribution of a glass plate heated in the infrared heating chamber has been investigated. Temperature of the glass panel is measured using a set of thermocouples and the optical pyrometer. Temperatures measured by thermocouples have good agreement with those by the pyrometer. The temperature uniformity of the panel is improved with wall reflectivity, which is one of the important factors to uniformly heat the panel

• Composites Research
• /
• 제35권2호
• /
• pp.93-97
• /
• 2022

열가소성 복합재의 핫프레스 성형공정에서 근적외선 가열의 적용은 소재를 성형온도까지 고속가열함으로써 공정 전체의 생산성을 확보할 수 있으나, 고에너지, 높은 성형온도, 고속가열에 의해 소재의 열화가 발생하여 재용융 성능 등의 소재 특성이 저하될 수 있다. 이에 본 연구는 고성능 항공소재로 활발히 연구개발되고 있는 Carbon fiber reinforced Polyetherketoneketone(CF/PEKK) 복합재에 적합한 핫프레스 성형공정의 최적화된 공정조건을 확립하기 위하여 근적외선 고속가열을 적용하였을 때, CF/PEKK 복합재에서 발생할 수 있는 열화 메커니즘과 그 특성을 형태학적, 열적 특성 및 기계적 성능 시험을 통해 평가하였다. 열화 반응에 따른 메커니즘 규명은 광학현미경을 활용하여 PEKK의 결정구조의 형태학적 조사를 기반으로 분석하였다. 그 결과, 열화가 진행됨에 따라 구결정의 크기가 감소하며 최종적으로 완전 열화 시 구결정이 소멸되는 것을 확인하였다. 열적 특성은 용융온도, 결정화온도, 발열량이 열화가 진행됨에 따라 감소하는 경향이 관찰되며, 460℃ 장시간 노출에서 결정구조가 소멸된 것을 확인하였다. 랩전단강도(Lap shear strength)시험 결과, 열화된 표면에서는 낮은 접합강도가 관찰되며, 접합면 분석에서 특정 면에서는 열에 의한 용융 특성이 나타나지 않았다. 결론적으로 CF/PEKK 복합재의 근적외선 고속가열 적용에 있어 특정 온도에서 열화 진행되며, 이에 구결정의 형태학적 변화와 열가소성 소재의 재용융 특성의 저하를 확인하였다.

• 한국의류산업학회지
• /
• 제12권6호
• /
• pp.843-850
• /
• 2010

To evaluate the heating performance of commercial heated vests, we investigated the thermal images and the temperature between body and vest for three heated vests. We captured infrared thermography by FT-IR Spectrometer to analyzed the heating temperature of the heating elements taken from the vests, and the maximum heating temperature of the vests was compared with thermal image in the room temperature($18^{\circ}C$). In outdoor experiment($-4.7^{\circ}C$), we measured the inner temperature as well as the thermal image of heated vests. Four healthy men participated in this experiment, and the ANOVA and Duncan test was performed for statistical analysis. As the results, the heating temperature range of the heated vests used in this experiment was $32{\sim}42^{\circ}C$, much lower than the displayed temperature range in their specifications, so the exact specification for heating performance of heated clothing was required. In comparisons of the heating performance among the heated vests, we found out that the insulation of clothing is very important to design the heated clothing, because the inner temperature of the vest had good insulation by itself was higher than that of the vest shown higher temperature over $7^{\circ}$ than another vests at the heating temperature.

• 한국산업융합학회 논문집
• /
• 제8권1호
• /
• pp.47-55
• /
• 2005

Infrared heating has been traditionally used in industrial applications for processes such as dehydration of food industrial. This heating method involves the application of radiation in the wavelength range of 2 to 50 micrometers. In this work, simultaneous heat balance equations were developed to simulate the infrared radiation heating of agricultural products. The equations assume that moisture diffuses to the outer boundaries of the material in liquid form and evaporation occurs at the surface of the agricultural products. Energy for moisture evaporation is supplied by the infrared radiant energy. The optimum temperature and drying time for the best drying conditions of changing the red peppers with the moisture content of 18% and the restore rate of 80~85% are $80^{\circ}C$ and 44 hours. The performance of radiation tubes coating with the radiation paint developed in this research has the energy of $2.27{\times}103W/m^2{\mu}m$, $150^{\circ}C$ within the scope of radiation wave length of $2{\sim}30{\mu}m$ and has the radiation 0.92~0.93, which is superior to the general radiation tubes. The extinction coefficient according to the band pass filter using the 4 flux theory ha higher dependability on wave length, accounting for $2{\sim}17{\mu}m$ and $5{\times}105{\sim}106m-1$. A comparison between the theoretical energy transfer whose figures are interpreted according to 4 flux theory and the experimental energy transfer of far infrared dryer leads to the findings of the agreement less than 5%.