• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.142-146
• /
• 1977

For the purpose of utilizing the saponins of the ground part of Panax ginseng, the studies on saponins isolated from the leaves, stems, and flowers of ginseng were Performed. The results were summarized as follows: 1. The crude saponin contents of ginseng loaves, stems, and flowers 12.8%, 1.6% and 6.9% respectively. 2. Infra-red spectrum of ginseng leaf saponin was identical with that of ginseng root.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.276-280
• /
• 2007

In this paper, heat transfer changes due to the shock/boundary layer interaction were investigated on surfaces where protruding bodies such as a cylinder and a secondary jet are mounted. With an infra-red thermography, surface temperature was measured and the measured data was used to obtain the convective heat transfer. Heat transfer phenomena around these two solid and fluid bodies were appeared to be very comparable each other. The inclination of a cylinder and the jet injection ratio were the important factors for the change of heat transfer on the effective surfaces.

• 보존과학연구
• /
• s.15
• /
• pp.59-103
• /
• 1994

Painting is well regarded as a stratified structure by the conservators and restorers. Hence, the scientific methods have been developed for the study of the interal layer of paintings. Examples of such methods are X-ray, infra-red, and ultra-violet photography. A more direct method is to look at the painting in cross section under the microscope and to analyze pigments using an electron probe X-ray micro analyzer(EPMA).In this research, I study and analyze twenty two Korean paintings of self-portraits including the first oil painting of Hui Dong Koh's self-portrait stored in the museum of Tokyo National University of Fine Arts and Music, employing these scientific techniques. The small fragments taken from the ground layers of the early oil paintings(1915∼1942)are analyzed using the EPMA. According to their main materials, the ground layers can be classified into five types ; 1. Lead white layer and double layer of calcium carbonate and lead white, 2. Zinc white with some mixiture of lead white, 3.Titanium white with some barium white, 4. Barium white, 5.Double layer of titanium white and zinc white.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.8
• /
• pp.21-28
• /
• 2016

In this paper, we propose a fast small target detection method using multiple filters, and describe system implementation using IPP libraries. To detect small targets in Infra-Red images, it is mandatory that you should apply a filter to eliminate a background and identify the target information. Moreover, by using a suitable algorithm for the environments and characteristics of the target, the filter must remove the background information while maintaining the target information as possible. For this reason, in the proposed method we have detected small targets by applying multi area(spatial) filters in a low luminous environment. In order to apply the multi spatial filters, the computation time can be increased exponentially in case of the sequential operation. To build this algorithm in real-time systems, we have applied IPP library to secure a software optimization and reduce the computation time. As a result of applying real environments, we have confirmed a detection rate more than 90%, also the computation time of the proposed algorithm have been improved about 90% than a typical sequential computation time.

• Journal of Welding and Joining
• /
• v.29 no.5
• /
• pp.63-71
• /
• 2011

Three-dimensional finite element analysis is performed to study the temperature distribution phenomenon of TIG assisted friction stir welding (TAFSW) between dissimilar plates (Al 6061-T6 and stainless steel 304). TAFSW is a solid-state welding process that integrates TIG (Tungsten Inert Gas) into a friction stir welding (FSW), to preheat the harder material ahead of FSW tool during welding. In order to facilitate the industrial application of welding, 3D numerical modeling of heat transfer has been carried out applying Finite Element Method (FEM). The temperature distribution due to heat generation during TAFSW on dissimilar materials joint is analysed using in-house solver. Moving heat source along with frictional heat between the work specimens and tool surface is considered to calculate the heat input. The analytical model used predicts successfully the maximum welding temperatures that occur on the dissimilar materials during TAFSW. Comparison with the infra red camera and thermocouple measurement results shows that the results from the current numerical simulation have good agreement with the measured data.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.192-192
• /
• 2013

본 연구에서는 RF/DC 마그네트론 스퍼터링 시스템을 이용하여co-sputtering 방법으로 성장시킨 고이동도를 갖는Ge-doped $In_2O_3$In2O3 (IGO) 박막의 전기적, 광학적, 구조적 특성을 평가하고, 이를 유기태양전지와 유기발광다이오드에 적용함으로써 고이동도 IGO 투명전극의 소자 적용가능성을 타진하였다. GeO2 타겟에 인가되는 도핑 Power와 급속열처리 온도가 30 W, $500^{\circ}C$일 때, 최적화 된 IGO 박막으로부터 $2.8{\times}10^{-4}$ Ohm-cm의 낮은 비저항과 86.9% (550 nm)의 높은 투과도를 확보하였다. 뿐만 아니라 Near Infra-red (750~1,200 nm) 영역에서의 IGO투명전극의 광투과율이 결정질의 ITO보다 높은(약15%) 투과도를 보이는 것을 통해 IGO박막의 높은 LAS (Lewis Acid Strength) 값을 가지는 Ge 원소의 도핑이 NIR 영역의 광투과율 향상에 미치는 영향을 확인할 수 있었다. 최적 조건의 IGO 박막을 적용하여 Fill Factor 67.38%, Short circuit current density 8.43 mA/cm2, open circuit voltage 0.60 V, efficiency 3.44%의 유기태양전지 및 19.24%의 외부양자효율을 갖는 유기발광다이오드를 제작함으로써 결정질 ITO 전극(20.05%)을 대체할 수 있는 고투과, 고이동도 IGO 투명 전극 및 이를 이용한 광전소자 적용 가능성을 타진하였다.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.45.2-45.2
• /
• 2009

과학기술위성 3호의 주탑재체인 MIRIS (Multi-purpose InfraRed Imaging System)는 우주관측카메라, 지구관측카메라로 구성되어 있으며, 우주관측카메라는 구경 80mm(f/2)의 광시야 굴절식 광학계로 구성되어 있다. 지상과 우주에서 사용하는 적외선 망원경의 경우 열잡음을 줄이기 위해 광학계과 검출기를 냉각하게 되는데, MIRIS의 경우 공간과 무게를 줄이기 위해 복사 냉각을 위한 passive cooling 방법으로 설계를 하였다. 우주관측 카메라의 광학계를 200K 이하로 냉각하기 위하여, 관측시야 밖에서 입사하는 불필요한 photon 들을 반사시키기 위한 winston cone baffle, 위성체로부터 유입되는 열을 차단하기 위한 30층의 MLI(Multi Layer Insulation), 광학계와 구조물의 지지를 열전달율이 낮은 GFRP(Glass Fiber Reinforced Polymer)로 설계하여 제작하였다. 우주관측 카메라를 열진공 챔버 내부에 설치하고 우주공간과 비슷한 환경을 조성하여 광학계가 200K 이하로 냉각되는 것을 확인 하였으며 그 실험 결과에 대해 논의 하고자 한다.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.71-83
• /
• 1984

The purpose of this study was to evaluate the transmission spectrum of the set calcium hydroxide dental cement (Dycal, L.D. Caulk Co. Milford, Del.) Cement was prepared for A T R spectra at a low powder-to-liquid ratio of 3.0gm/ml in order to retard the reaction and facilitate the manipulation of loading the cement into the cell. Spectra were recorded on an I R Spectrophotometer (MX-1, FT) at an agle of incidence of 55. The A T R cell was a RIIc Model TR5 with a hemisperical KRS-5 (Thallium-Bromide-Iodide). A spectrum was recorded within 3 minutes. Further spectra were recorded after 5,10,30 minutes and 1,5,24, 72 hours. The results were as follows; 1. The setting reaction between acid paste and base past would take place fastly within 10 minutes after mix, and that would be slow until 72 hours after mix. 2. In the set cements, some methyl salicylate and calcium hydroxide remained unreacted until 72 hours after mix. 3. The setting reaction and the reaction rate occuring at the surface and in the bulk cements were similar. 4. The chelates were bound together between calcium hydroxide and methyl salicylate.

• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.35-43
• /
• 2017

A 3D transient heat transfer model is developed by ABAQUS software to study the temperature distribution during friction stir welding process at different rotational speeds. Furthermore, AA 5083-O plates were joined by FSW technique. For this purpose, a universal milling machine was used to perform the welding process and a mechanical vice was used to fix the work pieces in the proper position. The joints were friction stir welded at a constant travel speed 50 mm/min and two rotational speed values; 400 rpm and 630 rpm using two types of tools; cylindrical threaded pin and tapered smooth one. At each welding condition the temperature was measured using infra-red thermal image camera to verify the simulated temperature distribution. The welded joints were visually inspected as well as by macro- and microstructure evolutions. In addition, the welded joints were mechanically tested for hardness and tensile strength. The maximum peak temperature obtained was at higher rotational speed using the threaded tool pin profile. The results showed that the rotational speed affects the peak temperature, defects formation and sizes, and the mechanical properties of friction stir welded joints. Moreover, the threaded tool gives superior mechanical properties than the tapered one at lower rotational speed.

• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.44-51
• /
• 2017

In the present study, AA 5083-O plates are joined by friction stir welding technique. A universal milling machine was used to perform the welding process of the work-pieces which were fixed on the proper position by a vice. The joints were friction stir welded by two tools with different pin profiles; cylindrical threaded pin and tapered smooth one at different rotational speed values; 400 rpm and 630 rpm, and different welding speed values; 100 mm/min and 160 mm/min. During FSW of each joint, the temperature was measured by infra-red thermal image camera. The welded joints were inspected by visually as well as by the macro- and microstructure evolutions. Furthermore, the joints were tested for measuring the hardness and the tensile strength to study the effect of changing the FSW parameters on the mechanical properties. The results show that increasing the rotational speed results in increasing the peak temperature, while increasing the welding speed results in decreasing the peak temperature for the same tool pin profile. Defect free welds were obtained at lower rotational speed by the threaded tool profile. Moreover, the threaded tool pin profile gives superior mechanical properties at lower rotational speed.