• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.5
• /
• pp.1514-1531
• /
• 2014

Femtocell provides better coverage and higher spectrum efficiency in areas rarely covered by macrocells. However, serious two-tier interference emerging from randomly deploying femtocells may create dead zones where the service is unavailable for macro-users. In this paper, we present adopting cognitive radio spectrum overlay to avoid intra-tier interference and incorporating spectrum underlay and overlay to coordinate cross-tier interference. It is a novel centralized control strategy appropriate for both uplink and downlink transmission. We introduce the application of proper spectrum sharing strategy plus optimal power allocation to address the issue of OFDM-based femtocells interference-limited downlink transmission, along with, a low-complexity suboptimal solution proposed. Simulation results illustrate the proposed optimal scheme achieves the highest transmission rate on successfully avoiding two-tier interference, and outperforms the traditional spectrum underlay or spectrum overlay, via maximizing the opportunity to transmit. Moreover, the strength of our proposed schemes is further demonstrated by comparison with previous classic power allocation methods, in terms of transmission rate, computational complexity and signal peak-to-average power ratio.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.619-628
• /
• 2012

The ZigBee network has been considered to monitor electricity usage of home appliances in the smart grid network. ZigBee, however, may suffer from a coexistence problem with wireless local area network (WLAN). In this paper, to resolve the coexistence problem between ZigBee network and WLAN, we propose a new protocol constructing a cognitive smart grid network for supporting monitoring of home appliances. In the proposed protocol, home appliances first estimates the transmission timing and channel information of WLAN by reading request to send/clear to send (RTS/CTS) frames of WLAN. Next, based on the estimated information, home appliances transmit a data at the same time as WLAN transmission. To manage the interference between WLAN and smart grid network, we propose a cognitive beamforming algorithm. The beamforming algorithm is designed to guaranteeing zero interference to WLAN while satisfying a required rate for smart metering. We also propose an energy efficient rate adaptation algorithm. By slowing down the transmission rate while satisfying an imperceptible impact of quality of service (QoS) of the receiver, the home appliance can significantly save transmit power. Numerical results show that the proposed multiple antenna technique provides reliable communications for smart metering with reduced power comparing to the simple transmission technique.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.241-250
• /
• 2000

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and synchronizations and secure communication of a lossy equivalent transmission are investigated. Since the synchronization of the lossy equivalent transmission system is impossible by coupled synchronization, theory having both the drive-response and the coupled synchronization is proposed. The proposed method is synthesizing the desired information with the chaos circuit by adding the information signal to the chaos signal in the lossy equivalent transmission system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.1-6
• /
• 2002

Generally, most significant information of images is included in the object regions. Thus, this paper proposes the object regions prior transmission method using the bidirectional round filter. The proposed method extracts the object regions, and then transmits the wavelet coefficients of the object regions, prior to others, in the encoding procedure using SPIHT So, it makes significant image information be restored faster than others for a short time. Consequently, through the proposed method the significant information of images is able to be recognized at a low bit rate and the condition of the continuous transmission is decidable by recognizing significant information fast, so that the searching time and efficiency can be improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.810-823
• /
• 2005

The transmission of duplicate packets provides a great loss-resilience without undue time-delay in the video transmission over packet loss networks. But this method generally deteriorates the problem of traffic congestion because of the increased bit-rate required for duplicate transmission. In this paper, we propose an efficient packetization and duplicate transmission of video packets. The proposed method transmits only the video signal with high priority for each video macroblock that is quite small in volume but very important for the reconstruction of the video. The proposed method significantly reduces the required bit-rate for duplicate transmission. An efficient packetization method is also proposed to reduce additional packet overhead which is required for transmitting the duplicate data. The duplicated high priority data of the Previous video slice is transmitted as a Piggyback to the data Packet of the current video slice. It is shown by simulations that the proposed method remarkably improves the packet loss-resilience for video transmission only with small increase of redundant duplicated data for each slice.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1433-1441
• /
• 2011

Design rules of optical transmission links with dispersion management (DM) and optical phase conjugation (OPC) for compensating optical signal distortion due to chromatic dispersion and self phase modulation (SPM) of single mode fiber (SMF) are investigated in this paper. Design rules consist of optimal net residual dispersion (NRD) and optimal range of launching power of wavelength division multiplexed (WDM) channels as a function of total transmission length and span length. In all considered total transmission length and span length, optimal NRD are obtained to +10 ps/nm and -10 ps/mn for transmission links, which is controlled by precompensation and postcompensation, respectively. It is confirmed that system performances are more improved and effective NRD for wide launching power have wider range as total transmission length and span length are more decreased.

• International Journal of Railway
• /
• v.3 no.2
• /
• pp.39-45
• /
• 2010

The RF-CBTC (Radio Frequency-Communication Based Train Control) System is a communication system in railroad systems. The communication method of RF-CBTC system is the wireless between the wayside device and on-board device. The wayside device collects its location and speed from each train and transmits the distance from the forwarding train to the speed-limit position to it. The on-board device controlling device controls the speed optimum for the train. In the case of the RF-CBTC system used in Korea, transmission frequency is 2.4 [GHz]. It is the range of ISM(Industrial Scientific and Medical equipment) band and transmission of voice and data is performed by CDMA (Code Division Multiple Access) method. So noises are made in the AWGN (Additive White Gaussian Noise) and fading environment. Currently, the SNR (Signal to Noise Ratio) is about 20 [dB], so due to bit errors made by noises, transmission of reliable information to the train is not easy. Also, in the case that two tracks are put to a single direction, it is needed that two trains transmit reliable voice and data to a wayside device. But, by noises, it is not easy that just a train transmits reliable information. In this paper, we estimated the BER (Bit Error Rate) related to the SNR of voice and data transmission in the environment such as AWGN and fading from the RF-CBTC system using the CDMA method. Also, we supposed the SNR which is required to meet the BER standard for voice and data transmission. By increasing the processing gain that is a ratio of chip transmission to voice and data transmission, we made possible voice and data transmission from maximally two trains to a wayside device, and demonstrated it by using Matlab program.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.773-783
• /
• 2016

Both coordinated multi-point transmission and frequency reuse are effective approaches to mitigate inter-cell interference and improve network coverage. The motivation of this work is to explore the manner to effectively utilize the spectrum resource by reasonably combining cooperation and frequency reuse. The $Mat{\acute{e}}rn$ cluster process, which is appropriate to model networks with hot spots, is used to model the spatial distribution of base stations. Two cooperative mechanisms, coherent and non-coherent joint transmission (JT), are analyzed and compared. We also evaluate the effect of multiple antennas and imperfect channel state information. The simulation reveals that the proposed approach to combine cooperation and frequency reuse is effective to improve the network coverage for users located at both the center and the boundary of the cooperative region.

• Journal of information and communication convergence engineering
• /
• v.10 no.4
• /
• pp.365-371
• /
• 2012

In recent years, researchers have been attracted to clustering methods to improve communication and data transmission in a network. Compared with traditional wireless networks, wireless sensor networks are energy constrained and have lower data rates. The concept of implementing a clustering algorithm in an existing project on gateway relocation is being explored here. Low energy adaptive clustering hierarchy (LEACH) is applied to an existing study on relocating a gateway. The study is further improved by moving the gateway to a specific cluster based on the number or significance of the events detected. The protocol is improved so that each cluster head can communicate with a mobile gateway. The cluster heads are the only nodes that can communicate with the mobile gateway when it (the mobile gateway) is out of the cluster nodes' transmission range. Once the gateway is in range, the nodes will begin their transmission of real-time data. This alleviates the load of the nodes that would be located closest to the gateway if it were static.

• Journal of information and communication convergence engineering
• /
• v.7 no.1
• /
• pp.41-45
• /
• 2009

In mobile GIS environments, a client needs to receive the isogram data with a topographical map from a server, if the mobile client wants to display map with elevation information. Because the elevation data size is normally quite large, the client will suffer some problems to receive the elevation data from server. The main reason is a resource limitation of the mobile devices. To overcome these problems, this paper proposes new data structures and algorithms. They are designed for efficient transmission of contour data to a client. Because of the contour data are generated as a vector style from elevation information stored at a server, the proposed algorithms are focused to minimize the transmission data volume and time.