• Journal of Digital Contents Society
• /
• v.17 no.3
• /
• pp.181-188
• /
• 2016

Video streaming traffics which are arrived in receiver have irregular traffic patterns by many problems over the network path. Particularly, if these received traffics enter into replay buffer without any operation, the overflow and underflow effects are made according to the buffer status. There was an existing scheme which automatically set up token bucket parameters using the video information file under the assumption of the lossless packet on network. The existing scheme has a problem which can set up the wrong token bucket parameters by the lost packets on the practical networks with video packet loss. Therefore, this paper proposes a new scheme which reset up video file information to correct the wrong token bucket parameters in case of packet loss in practical networks with packet loss. Through the simulation, it was found that the proposed scheme would have better performance than the existing scheme in terms of overflow generation and packet loss.

• The KIPS Transactions:PartB
• /
• v.9B no.2
• /
• pp.173-180
• /
• 2002

The virtual cell loss rate was introduced for the training pattern of the neural network in the VOB(Virtual Output Buffer) model. The VOB model shows that the neural network can find the connection admission boundary without the real cell loss rate. But the VOB model tends to overestimate the cell loss rate, so the utilization of network is low. In this paper, we uses the reference curve of the cell loss rate, which contains the information about the cell loss rate at the connection admission boundary. We process the patterns of the virtual cell loss rate using the reference curve, We performed the simulation with two major ATM traffic classes. One is On-Off traffic class that has the traffic characteristic of LAN data and other is Auto-Regressive traffic class that has the traffic characteristic of a video image communication.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.3
• /
• pp.1-10
• /
• 2003

RUSLE(revised universal soil loss equation) has been widely used for estimating soil loss. It is very difficult to validate the model estimation since the calculated soil loss should be compared with the survey data for quantification. The input variables for RUSLE model were estimated to grid cell for raster analysis in Bosung basin. Both reconnaissance(1:250,000) and detailed(1:25,000) soil maps were used to derive the input variables for soil erodibility factor. Soil loss calculated using RUSLE were compared to the unit sediment deposit surveyed by KICT(Korea Institute of Construction Technology, 1992) in Bosung basin for assessment. Unit sediment deposit from the cell size of 120m and 150m were the closest to the survey data in 1:250,000 and 1:25,000 map scale, respectively.

• Journal of Information Technology Services
• /
• v.15 no.3
• /
• pp.15-31
• /
• 2016

Sales Force Automation (SFA) is a strategic information system and one of the components of operational CRM system. SFA supports salespeople's activities such as selection of potential customers, creative value proposition, after-sales services, etc. SFA is increasingly used in many companies because it has the advantages to raise the salespeople's productivity by developing forecasting ability, value proposition ability, after sales service ability etc. Many researches have shown that implementation of SFA leads to the increase of salepeople performance, organizational performance, and quality of customer relationship. However, Some prior studies have discussed on the SFA implementation failure and pointed out that one of important causes of this failure is salespeople's resistance to SFA. Although many researches explain SFA acceptance phenomenon using Technology Acceptance Model (TAM) and Theory of Planned Behavior (TPB), these researches didn't deeply investigate the salespeople's resistance to SFA. Therefore, this study focuses on the factors influencing salespeople's resistance to SFA and the relationships among these factors. This study identified three factors (salespeople's perceived loss of power, perceived loss of autonomy, and perceived time and effort waste) influencing salespeople's resistance to SFA. The hypotheses testing results showed that salespeople's perceived loss of power and perceived time and effort waste significantly increased salespeople's resistance to SFA. And salespeople's perceived loss of power plays a mediating role between perceived loss of autonomy/perceived time and effort waste and salespeople's resistance to SFA. At the end of the paper, theoretical and managerial implications of this study and the limitations and future research directions are discussed.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.79-90
• /
• 2005

The purpose of this study is to estimate quantitatively soil loss and sediment yield in alpine farmland. For this purpose, Naerinchon watershed in Gangwon province was selected as our study area and total annual soil loss and sediment yield was estimated respectively by the Revised Universal Soil Loss Equation (RUSLE) model and the Sediment Delivery Distributed (SEDD) model. The results of this study clearly show that dry field areas have significant impact on the total soil erosion and sediment yield compared with other land use. Dry field areas represent only $2.6\%$ of the total area of the watershed but soil loss and sediment yield account for $10.9\%$ and $33.12\%$ of the total amount respectively Especially as with alpine farmland, this result is more clearly shown. These areas account for $1.8\%$ of the entire watershed but contribute to $7.7\%$ and $15\%$ of the total soil loss and sediment yield respectively. From the above results, we can know that alpine farmland is important source of soil loss and sediment yield and it is need to prevent and control. soil erosion from alpine filmland urgently.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.451-454
• /
• 2019

In this paper, we propose a verifiable image transformation networks to transform face sketch to photo and vice versa. Face sketch-photo is very popular in computer vision applications. It has been used in some specific official departments such as law enforcement and digital entertainment. There are several existing face sketch-photo synthesizing methods that use feed-forward convolution neural networks; however, it is hard to assure whether the results of the methods are well mapped by depending only on loss values or accuracy results alone. In our approach, we use two Resnet encoder-decoder networks as image transformation networks. One is for sketch-photo and another is for photo-sketch. They depend on each other to verify their output results during training. For example, using photo-sketch transformation networks to verify the photo result of sketch-photo by inputting the result to the photo-sketch transformation networks and find loss between the reversed transformed result with ground-truth sketch. Likely, we can verify the sketch result as well in a reverse way. Our networks contain two loss functions such as sketch-photo loss and photo-sketch loss for the basic transformation stages and the other two-loss functions such as sketch-photo verification loss and photo-sketch verification loss for the verification stages. Our experiment results on CUFS dataset achieve reasonable results compared with the state-of-the-art approaches.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.349-357
• /
• 2007

The most sensitive part of the installed optical fiber fable is the optical loss variation of the splicing part according to the environmental changes. This paper presents the details of the experimental results of the external environmental changes on optical loss, such as bending, temperature variation, temperature variation after water osmosis and vibration. Through the bending test of optical fiber, rapid increase of optical loss was measured within the radius of 30mm. The result of optical loss variation within the temperature range of $-30^{\circ}C{\sim}60^{\circ}C$ is less than 0.02dB. It was confirmed that the maximum optical loss increased up to 0.2dB in case of water osmosis within the temperature range of $-40^{\circ}C{\sim}80^{\circ}C$. There is small optical loss variation of 0.01dB under the 1mm vibration test. The experimental results of this paper can be used as the reference data for the design of the optical fiber cable splicing enclosure to protect the optical loss variation due to environmental changes.

• Korean Journal of Audiology
• /
• v.24 no.4
• /
• pp.174-179
• /
• 2020

Background and Objectives: The integration of auditory-visual speech information improves speech perception; however, if the auditory system input is disrupted due to hearing loss, auditory and visual inputs cannot be fully integrated. Additionally, temporal coincidence of auditory and visual input is a significantly important factor in integrating the input of these two senses. Time delayed acoustic pathway caused by the signal passing through digital signal processing. Therefore, this study aimed to investigate the effects of hearing loss and hearing aid digital delay circuit on sound-induced flash illusion. Subjects and Methods: A total of 13 adults with normal hearing, 13 with mild to moderate hearing loss, and 13 with moderate to severe hearing loss were enrolled in this study. Subsequently, the sound-induced flash illusion test was conducted, and the results were analyzed. Results: The results showed that hearing aid digital delay and hearing loss had no detrimental effect on sound-induced flash illusion. Conclusions: Transmission velocity and neural transduction rate of the auditory inputs decreased in patients with hearing loss. Hence, the integrating auditory and visual sensory cannot be combined completely. Although the transmission rate of the auditory sense input was approximately normal when the hearing aid was prescribed. Thus, it can be concluded that the processing delay in the hearing aid circuit is insufficient to disrupt the integration of auditory and visual information.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.908-909
• /
• 2023

Recently, several generative models have emerged and are being used in various industries. Among them, Cycle GAN is still used in various fields such as style transfer, medical care and autonomous driving. In this paper, we propose two methods to improve the performance of these Cycle GAN model. The ReLU activation function previously used in the generator was changed to Leaky ReLU. And a new loss function is proposed that considers the semantic level rather than focusing only on the pixel level through the VGG feature extractor. The proposed model showed quality improvement on the test set in the art domain, and it can be expected to be applied to other domains in the future to improve performance.

• Human Ecology Research
• /
• v.54 no.1
• /
• pp.27-43
• /
• 2016

This study initiates from the question of whether current advertising regulations are appropriate to be applied to the market. It confirms the relationship between misleading online advertisements of weight-loss food and consumer damages. This study argues that it is necessary to enforce monitoring and regulating (strengthening monitoring) for situations where misleading advertisements are exposed in the market with subsequent consumer damages. However, deregulation is needed for advertisements exposed in the name of misleading advertisements but with no consumer damages. In conclusion, the regulations of current weight loss foods are properly established $vis-{\grave{a}}-vis$ the market situation. However, misleading advertisements are prevalent for all regulated types: Type I (product quality and effect), Type II (endorsement and warranty), Type III (ways to use and safety), Type IV (comparison and superiority), and Type V (company information). Promotion targeting businesses, market monitoring and control are necessary to ensure that advertising regulations (which have existed only as an institution) can be appropriately applied. It is also confirmed that 'comparison advertising' (applicable to Type IV where consumer damages were not shown compared to other regulations) does not have an actual effect as a consumer protection regulation that should be considered in regulation revisions. Consumers also did not recognize Type III and V in the purchasing stage while consumer damages were demonstrated; consequently, this implies that consumers need to check and become attentive to these types.