• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.1
• /
• pp.68-80
• /
• 2021

An uncertified facility is a facility not certified, as defined in the Biological Agents and Toxins Act (BATA) in Singapore, but has met the requirements of the Ministry of Health to possess First and Fifth Schedule biological agents and toxins. This type of facility is also known as a Biosafety Level 2 Plus (BSL 2+) facility. Registration as an uncertified facility or a BSL 2+ facility requires a certain process and procedure to be sought with the Biosafety Branch of the ministry. This review, shares first-hand knowledge on the journey to achieving registration of the authors' facility. The procedure involved considerable preparation, setting up facility requirements, biosafety precautions, procedures and practices, and training and competence of laboratory users. The ministry conducted a thorough onsite facility audit to ensure that the facility requirements and biosafety procedures and practices were in place. It then issued an approval letter of possession for the first-time use of biological agents and registered the laboratory as an uncertified facility. The expectation is that the comprehensive information shared may be of great benefit to other facilities with similar interests.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.56-57
• /
• 2014

As school facilities have been expanding quantity better than quality, efficient school facility management has been focused on from 2001 in domestic. Due to obsolescence of school facility, objective management and maintenance cost of school facility is very important. However LCC(Life cycle cost) analyst, owner, engineer, contractor and facility manager have a difficulty to obtain and facilitate the basic analyzed data required to analyze LCC of school facility and establish maintenance plan. Therefore this research presents muti-dimensional analysis method through data warehouse technique for supplying maintenance cost information of school facility that can trace and accumulate the scattered LCCing data in the perspective of life cycle of school facility.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.4 s.27
• /
• pp.53-60
• /
• 2003

GIS was introduced to spatial information of complex and various facility systematically and scientifically. And, recently, new trend has been spread by Mobile GIS owing to its fast development of information and communication technology. However, these Mobile GIS techniques were introduced in maintenances of various facilities. Due to its mismanagement, the use became insufficient in facilities causing database creation to require realism and mobility. Therefore, in this research to road facility of various facilities, it deduced improving the work process by using a Mobile GIS to analyze work process of the road facility database creation. And, through an experiment, by comparing and analyzing road facilities database creation process by existing method and improving method, could improvement of road facility database creation using a Mobile GIS.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.6
• /
• pp.39-46
• /
• 2019

In the 21st century, medical facility projects are required to operate appropriate digital technologies as the development of technology and the interests of various participants become more complex. In order for architects to successfully lead negotiations among various stakeholder groups, it is necessary to plan for effective communication through appropriate design reflecting their opinions and coordination of conflicts. For this purpose, building information modeling (BIM), which is a method of designing based on knowledge information related to medical facilities in the building database, can respond to change of order promptly and minimizes the occurrence of design errors can do. Recently, BIM technology and cloud computing technology in ICT have been combined and research on cloud BIM has been actively carried out. The use of cloud computing technology in BIM-based healthcare facility projects can effectively support decision making among project participants and has the advantage of sharing and collaborating on various forms of information generated during the design process, regardless of location and time. Therefore, the purpose of this study is to build of system that can support the design of medical facility using cloud computing technology in BIM.

• Journal of KIBIM
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2020

In managing building facilities, spatial information is the basic data for decision making. However, the method of acquiring spatial information is not easy. In many cases, the site and drawings are often different due to changes in facilities and time after construction. In this case, the site data should be scanned to obtain spatial information. The scan data actually contains spatial information, which is a great help in making space related decisions. However, to obtain scan data, an expensive LiDAR (Light Detection and Ranging) device must be purchased, and special software for processing data obtained from the device must be available.Recently, SLAM (Simultaneous localization and mapping), an advanced map generation technology, has been spreading in the field of robotics. Using SLAM, 3D spatial information can be obtained quickly in real time without a separate matching process. This study develops and tests whether SLAM technology can be used to obtain spatial information for facility management. This draws considerations for developing a SLAM device for real-time remote scanning for facility management. However, this study focuses on the system development method that acquires spatial information necessary for facility management through SLAM technology. To this end, we develop a prototype, analyze the pros and cons, and then suggest considerations for developing a SLAM system.

• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.290-305
• /
• 2022

Purpose: Currently, port facility informatization technology is focused on the planning and design phases, so the necessity of research and technology development on the port facility maintenance system based on life cycle-level information is emphasized. Method: Based on the maintenance history data of port facilities and facility operation information, from the perspective of the life cycle of port facilities, the system is configured to enable maintenance decisions for port facilities through analysis of aging patterns, performance degradation prediction models, and risk analysis and proposed a method of expressing information. Result: A function was developed to simultaneously display the SOC performance evaluation and the comprehensive performance evaluation developed in this study, so that mid-to long-term maintenance and reinforcement and facility expansion can be applied and comparatively judged. Conclusion: The integrated port performance system developed in this study induces and supports the risk minimization of port facility management by proactively promoting appropriate repair and reinforcement measures through historical and operational information on port facilities.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.556-564
• /
• 2018

The purpose of this study is to investigate the difference in social support and job satisfaction of disabled facility workers according to their general characteristics and job characteristics, and to understand the effect of social support on job satisfaction. A questionnaire was conducted against 143 disabled facility workers in D metropolitan city, from 5 January to 29 February 2016. The results of the study are as follows: first, no significant difference was found in the social support of disabled facility workers according to their general characteristics, and only the factor of job area showed significant difference in social support according to job characteristics. Secondly, there was no significant difference in job satisfaction of disabled facility workers according to their general characteristics or job characteristics. Thirdly, support of the superior, as a sub-factor of social support recognised by the disabled facility worker, was found to have a significant positive effect on job satisfaction. This study seeks to become foundational data for the development of plans to improve the job satisfaction of disabled facility workers.

• Spatial Information Research
• /
• v.18 no.1
• /
• pp.57-67
• /
• 2010

Recently, 2D GIS technology is applied for urban facility management. However, urban facilities are located in 3D space and the information loss is occurring during data abstraction from 3D urban facility to 2D object. Also, the number of urban facilities is increasing steadily and most of urban facilities are located in underground space in the city. Therefore 2D urban facility management system has a limitation on visualization and management for a large number of urban facilities. In this paper, a multi-dimensions urban facility management system based on multi-texture technology is proposed. The proposed system reduces the information loss and improves the readability of information by visualizing urban facilities on 3D virtual space. A multi-texturing technology is applied for integrating of 2D vector data and 3D raster data, and a multi-thread technology is used for improving speed and performance of the system. The proposed technology can be used as a guideline for urban facility monitoring as providing visual information of a facility status with 3D image and facility data.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.373-380
• /
• 2004

GIS was introduced to spatial information of complex and various facility systematically and scientifically. And, recently, new trend has been spread by Mobile GIS owing to its fast development of information and communication technology However, these Mobile GIS techniques were introduced in maintenances of various facilities. Due to its mismanagement, the use became insufficient in facilities causing database creation to require realism and mobility. Therefore, in this research, to road facility of various facilities, it deduced improving the work process by using a Mobile GIS to analyze work process of the road facility database creation. And, through an experiment, by comparing and analyzing road facilities database creation process by existing method and improving method, could improvement of road facility database creation using a Mobile GIS.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.259-260
• /
• 2015

In this paper, for deriving core function requirements of facility maintenance using BIM(Building Information Modeling) customized surveys were conducted with 30 facility managers during 6 momths from July 2014. As a result, 19 core function requirements for efficient facility maintenance are drawn. The core of Building facility management function is that opinions of facilities maintenance managers should be fully reflected than that of BIM experts. In the future, the development of maintenance programs based on BIM should be made fully by reflecting the opinions of building facility managers on the basis of this questionnaire survey results.