• The KIPS Transactions:PartD
• /
• v.15D no.5
• /
• pp.609-620
• /
• 2008

The service handling the map data in the mobile device including navigation, LBS, Telematics, and etc., becomes various. The size of map data which is stored and managed in the mobile device is growing and reaches in several GB. The conventional navigation system has used the read-only PSF (physical storage format) in order to enhance the performance of system by maximum in the mobile device which has limited resources. So though a little part of the map data is changed the whole data must be updated. In general, it takes several ten minutes to write the 2 GB map data to a flash memory of mobile device. Therefore, we have developed the mobile spatial DBMS (database management system) to solve the problem which is that the partial map data couldn't be updated in the conventional navigation system. And we suggest the policy to guarantee the performance of the navigation system which is implemented using the spatial mobile DBMS and verify this by experiment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.819-822
• /
• 2008

The demand against the contents service which is various with improvement capability of the mobile device. But the capability of heterogeneous mobile device to display contents has a difference from the side of the hardware, software, network conditions so the adaptation of contents is a solution to overcome this difference. This adaptation of contents is based on profile(DDL : Device Description Language) but there is no system which manages the profile efficiently. In this paper, we designed independent DDR(Device Description Repository) system that offers storage and optimized profiles processed by searching and recombination with request conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.2050-2057
• /
• 1999

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage devices with high storage density using short wavelength laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates with high dimensional accuracy, low residual stresses, and superb optical properties. In the present study, polycarbonate optical disk substrates were fabricated by injection compression molding and the birefringence, regarded as one of the most important optical properties for optical disk, is measured. The effects of various processing conditions upon the development of birefringence distribution were examined experimentally. It was found that the values of the birefringence distribution were very sensitive to the mold wall temperature history and the variance of the birefringence distribution in the radial direction was affected by the level of the packing and the compression pressure.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.3
• /
• pp.163-168
• /
• 2006

Small form factor optical pickup (SFFOP) corresponding to BD specifications is strongly proposed for the next-generation portable storage device. In order to generate SFFOP, small sized optical pickup has been fabricated. We have developed a small sited optical pickup that is called the integrated optical pickup (IOP). The fabrication method of this system is mainly dependant on the use of the wafer based micro fabrication technology, which has been used in MEMS process such as photolithography, reactive ion etching, wafer bonding, and packaging process. This approach has the merits for mass production and high assembling accuracy. In this study, to generate the small sized optical pickup for high recording capacity, IOP corresponding to BD specifications has been designed and developed, including three main parts, 1) design, fabrication and evaluation of objective lens unit, 2) design and fabrication of IOP and 3) evaluation process of FES and TES.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.79-84
• /
• 2006

The next generation of optical storage systems requires higher numerical aperture(NA) objective lenses and shorter wavelength laser in order to improve the unit areal density. A blu-ray technology satisfies a miniaturization and a high capacity which are the requirements of the portable device. In this paper, we analyze the optical performance of hybrid micro lens and do active alignment. The hybrid micro lens is manufactured by using a wafer based fabrication technology. Optical components of hybrid micro lens are evaluated. The measurement of the optical power, the spot size and the wavefront error are performed to evaluate the hybrid micro lens with NA 0.85. Using the measured data, we estimate if the performance of hybrid micro lens corresponds to the designed performance. After the performance of hybrid micro lens is evaluated. the integrated optical pickup and the hybrid micro lens are assembled by active alignment using UV curing and the optical performance of SFFOP is satisfied with BD specifications.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1433-1444
• /
• 2017

A family of non-isolated DC-DC three-port converters (TPCs) that allows for a more flexible power flow among a renewable energy source, an energy storage device and a current-reversible DC bus is introduced. Most of the reported non-isolated topologies in this area consider only a power consuming load. However, for applications such as hybrid-electric vehicle braking systems and DC microgrids, the load power generating capability should also be considered. The proposed three-port family consists of one unidirectional port and two bi-directional ports. Hence, they are well-suited for photovoltaic (PV)-battery-DC bus systems from the power flow viewpoint. Three-port converters are derived by combining different commonly known power converters in an integrated manner while considering the voltage polarity, voltage levels among the ports and the overall voltage conversion ratio. The derived converter topologies are able to allow for seven different modes of operation among the sources and load. A three-port converter which integrates a boost converter with a buck converter is used as a design example. Extensions of these topologies by combining the soft-switching technique with the proposed design example are also presented. Experiment results are given to verify the proposed three-port converter family and its analysis.

• Journal of Internet Computing and Services
• /
• v.21 no.3
• /
• pp.93-102
• /
• 2020

In order for data obtained through all stages of digital crime investigation to be recognized as evidence capability, it must satisfy legal / technical requirements. In this paper, we propose a mechanism and implement software to provide digital forensic evidence by automatically recovering files by scanning / inspecting the unallocated area inside the storage disk block without relying on information provided by the file system. The proposed technique checks / analyzes the RAW disk data of the system under analysis in 512-byte block units based on information on the storage format / file structure of various files stored on the disk without referring to the file system-related information provided by the operating system. The file carving process was implemented, and a smart carving mechanism was proposed to intelligently restore deleted or damaged files in the storage device. As a result, we have provided a block based smart carving method to intelligently identify fragmented and damaged files in storage efficiently for forgery analysis on digital forensic investigation.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.169-174
• /
• 2005

Current information storage devices read/write data on the rotating disk. The axial vibration of a rotating disk should be suppressed for the successful operation of the device. Information storage devices widely used in these days adopt relatively thick disk which is stiff enough to suppress axial vibration under allowable limit. However, the thickness of the disk is going to be thinner and thinner as the small form factor of the devices is getting preferred by the consumer. In this study, a stabilizer system, which is composed with 8 air bearings, is proposed for suppressing the axial vibration of a $95{\mu}m$ thick PC disk in a non-contacting manner. The performance of the stabilizer system is simulated by numerical computation and then confirmed its results through a series of experiment. A thin and flexible disk has various vibration modes when it rotates in high speed. The stabilizer system generates positive as well as negative pressure due to the rotation of flexible disk so that the force due to the pressure distribution pushes and pulls rotating disk in a non-contacting manner. The balance between positive and negative pressure forces can be obtained by adjusting the area and the slope of the air bearing surface. The axial vibration of the flexible disk of 120mm diameter is suppressed successfully from over $1000{\mu}m$ to $30{\mu}m$ peak-to-peak value at the rotational speed of 5,000rpm.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.2
• /
• pp.61-69
• /
• 2022

As the delivery industry grew around the restaurant industry along with the COVID-19 situation, the number of delivery workers increased significantly. Along with that, new forms of delivery using personal mobility (PM) also emerged and two-wheeled or PM-related accidents are steadily increasing. This study manufactures a PM's driving analysis device to establish a safe delivery monitoring environment. This system was constructed to process data collected from the driving analysis device and through a cloud server, which would recognize and record special situations (acceleration/deceleration, speed bump) that could occur during the PM's driving situation. As a result, the angular speed, acceleration, and geomagnetic values collected from the IMU in the device were able to determine whether to drive, drive on the sidewalk, and drive on the speed bump. This technology was able to achieve approximately 1600 times more driving information storage efficiency than conventional image-based recording devices.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.267-270
• /
• 2017

As IT technology developed, storage media also developed. Among them, USB, which is a removable storage medium, is used not only to have several per person but also to work in various companies. Users store valuable and confidential data within USB. As time went on, the need for security increased. In order to solve this security problem, USB has been introduced to allow users to access internal files by inputting ID and password by embedding a security program in USB. However, the method of storing ID and Password inside is low confidentiality and high risk of information leakage. To solve these problems, we propose a 2 factor authentication system using Radius server in addition to login authentication. The proposed system not only improves the authenticity of the device, but also reduces the risk of infringement of personal information when lost. It also encrypts internal files to increase the confidentiality of internal information.