• The KIPS Transactions:PartD
• /
• v.10D no.4
• /
• pp.591-602
• /
• 2003

Delay and discontinuance phenomenon of service are cause by sudden increase of the network communication amount and the quantity consumed of resources when Internet users are driven excessively to a conventional single large database sewer. To solve these problems, spatial database cluster consisted of several single nodes on high-speed network to offer high-performance is risen. But, research about spatial join operation that can reduce the performance of whole system in case process at single node is not achieved. So, in this paper, we propose efficient parallel spatial join processing method in a spatial database cluster system that uses data partitions and replications method that considers the characteristics of space data. Since proposed method does not need the creation step and the assignment step of tasks, and does not occur additional message transmission between cluster nodes that appear in existent parallel spatial join method, it shows performance improvement of 23% than the conventional parallel R-tree spatial join for a shared-nothing architecture about expensive spatial join queries. Also, It can minimize the response time to user because it removes redundant refinement operation at each cluster node.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.29-39
• /
• 2009

The need for radio spectrum is recently considered as a huge hurdle towards the rapid development of wireless networks. Large parts of the spectrum are allocated to licensed radio services in proprietary way. However, enormous success of the wireless services and technologies in the unlicensed bands has brought new ideas and innovations. In recent years cognitive radio has gained much attention for solving the spectrum scarcity problem. It changes the way spectrum is regulated so that more efficient spectrum utilization is possible. Multi-hop relay technology on the other hand has intensively been studied in the area of ad hoc and peer-to-peer networks. But in cellular network, only recently the integration of multi-hop capability is considered to enhance the performance significantly. Multi-hop relaying can extend the coverage of the cell to provide high data rate service to a greater distance and in the shadowed regions. Very few papers still exist that combine these methods to maximize the spectrum utilization. Thus we propose a network architecture combining these two technologies in a way to maximize the system throughput. We present the throughput capacity equations for the proposed system model considering various system parameters like utilization factor by the primary users and primary users' transmission radius and through extensive numerical simulations we analyze the significance of work.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.17-27
• /
• 2011

Most of the previous mobility management protocols such as IETF MIPv4/6 and its variants standardized by the IETF do not support global seamless handover because they require partially changes of the existing network infrastructure. In this article, we propose a simple mobility management protocol (SMMP) which can support global seamless handover between homogeneous or heterogeneous wireless networks. To do this, the SMMP employs separate location management function as DMMS to support global user and service mobility and the bidirectional tunnels are dynamically constructed to support seamless IP mobility by using the IEEE MIH extension server, which is extended the IEEE 802.21 MIH standards. The detailed architecture and functions of the SMMP have been designed. Finally, the mathematical analysis and the simulation have been done. The performance results show the proposed SMMP outperforms the existing MIPv6 and HMIPv6 in terms of handover latency, packet loss, pear signal noise ratio (PSNR).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.167-175
• /
• 2019

Recently, health examination centers have been changing from auxiliary medical facilities to key and independent medical facilities. However, it is not easy to improve medical facilities, including health examination centers, due to the variable characteristics of the relationship between humans and space. Therefore, this study was done to develop a pedestrian-based discrete event simulation analysis program to examine the problems and develop methods for improvement. The program was developed to analyze five evaluation indices and the density of examinees. The problems were derived by analyzing the required time, capacity, and queue size for each examination through simulations. We reduced the examination time and moving distance, increased the capacity, and distributed the queues by adjusting the medical services and relocating the examination rooms. The results were then quantitatively verified by simulations.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.78-88
• /
• 2016

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. In design phase, especially, collaboration based on BIM system has being a key factor for successful next generation building project. Through the analysis of current research trend about IT technologies, virtualization and BIM service, data exchange such as drawing, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. In various industrial fields, cloud computing technology is utilized as a promising solution which can reduce time and cost of hardware infrastructure. Among the cloud computing technology, VDI is receiving a great deal of attention from it market as an essential part cloud computing. VDI enables to host multiple individual virtual machines by using hypervisor. It has an advantage to easy main device management. Therefore, this study implements a step-by-step user's DaaS by analyzing the desktop resource data of the workers from Pre-design phase to Schematic design, Design develop and Construction design phase. It also develops BIM environment based on test of BIM modeler and designers in architectural design firm. The goal of the study is to enable the cloud computing BIM server. It provides cost saving, high-performance quality of working environment and cooperation's convenience and high security when doing BIM work in small and medium sized architectural design firm.

• The KIPS Transactions:PartC
• /
• v.13C no.4 s.107
• /
• pp.427-434
• /
• 2006

Broadband Convergence Network(BcN) is a critical infrastructure to provide wired-and-wireless high-quality multimedia services by converging communication and broadcasting systems, However, there exist possible danger to spread the damage of an intrusion incident within an individual network to the whole network due to the convergence and newly generated threats according to the advent of various services roaming vertically and horizontally. In order to cope with these new threats, we need to analyze the vulnerabilities of BcN in a system architecture aspect and classify them in a systematic way and to make the results to be utilized in preparing proper countermeasures, In this paper, we propose a new classification of vulnerabilities which has been extended from the ITU-T recommendation X.805, which defines the security related architectural elements. This new classification includes system elements to be protected for each service, possible attack strategies, resulting damage and its criticalness, and effective countermeasures. The new classification method is compared with the existing methods of CVE(Common Vulnerabilities and Exposures) and CERT/CC(Computer Emergency Response Team/Coordination Center), and the result of an application to one of typical services, VoIP(Voice over IP) and the development of vulnerability database and its management software tool are presented in the paper. The consequence of the research presented in the paper is expected to contribute to the integration of security knowledge and to the identification of newly required security techniques.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.516-529
• /
• 2021

Coniferous forests in the Baekdudaegan protected area are gradually losing their landscape diversity and uniqueness along with their ecological stability due to changes in vegetation composition and structures caused by various disturbance factors, such as climate change, vegetation succession, and human interference. This study provides basic data for establishing a comprehensive conservation plan for coniferous forests in the Baekdudaegan protected area. We classified the vegetation unit types using the Zurich-Montpellier School of Phytosociology and two-way indicator species analysis methods and analyzed the species diversity and structural characteristics based on the vegetation information of 755 stands collected in the natural resources change survey of the Baekdudaegan mountains (2016 to 2020) by the Korea Forest Service. Therefore, the vegetation of the coniferous forests of theBaekdudaegan protected area was classified into 15 types under the vegetation unit hierarchy of two community groups, four communities, seven sub-communities, and 14 variants. Furthermore, we compared the total coverage among vegetation types, importance values, constancy classes, life-forms, and diversity indices. Additionally, the average total coverage and number of species per 100 m² of all coniferous forests were 232% and 21 species, respectively, with the species diversity and dominance indices averaging 1.907 and 0.222, respectively.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.1
• /
• pp.83-105
• /
• 2023

A robot-friendly building certification system was established in 2022 to accommodate the growing number of service robots introduced into buildings. However, this system primarily targeted office buildings, with limitations in applying other functional architectures. To address this problem, we developed a certification model of a robot-friendly environment to extend the existing system to apartment complexes. Using focus group interviews and the analytic hierarchy process, we established 28 evaluating items categorized as (a) architecture and facility design, (b) networks and systems, (c) building operations management, and (d) support for robot activity and other services. These indicators were weighted based on their relative importance within and between categories, resulting in scores ranging from 1 to 18 points and a total of 176 points. According to evaluations with the 28 items, each apartment complex could be graded as "best," "excellent," or "general" based on its total achieved scores. This study is significant, as we present the world's first certification model of a robot-friendly environment for apartment complexes that considers human-robot interactions

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.79-96
• /
• 2021

Green infrastructure planning represents landscape planning measures to reduce particulate matter. This study aimed to derive factors that may be used in planning green infrastructure for particulate matter reduction using text mining techniques. A range of analyses were carried out by focusing on keywords such as 'particulate matter reduction plan' and 'green infrastructure planning elements'. The analyses included Term Frequency-Inverse Document Frequency (TF-IDF) analysis, centrality analysis, related word analysis, and topic modeling analysis. These analyses were carried out via text mining by collecting information on previous related research, policy reports, and laws. Initially, TF-IDF analysis results were used to classify major keywords relating to particulate matter and green infrastructure into three groups: (1) environmental issues (e.g., particulate matter, environment, carbon, and atmosphere), target spaces (e.g., urban, park, and local green space), and application methods (e.g., analysis, planning, evaluation, development, ecological aspect, policy management, technology, and resilience). Second, the centrality analysis results were found to be similar to those of TF-IDF; it was confirmed that the central connectors to the major keywords were 'Green New Deal' and 'Vacant land'. The results from the analysis of related words verified that planning green infrastructure for particulate matter reduction required planning forests and ventilation corridors. Additionally, moisture must be considered for microclimate control. It was also confirmed that utilizing vacant space, establishing mixed forests, introducing particulate matter reduction technology, and understanding the system may be important for the effective planning of green infrastructure. Topic analysis was used to classify the planning elements of green infrastructure based on ecological, technological, and social functions. The planning elements of ecological function were classified into morphological (e.g., urban forest, green space, wall greening) and functional aspects (e.g., climate control, carbon storage and absorption, provision of habitats, and biodiversity for wildlife). The planning elements of technical function were classified into various themes, including the disaster prevention functions of green infrastructure, buffer effects, stormwater management, water purification, and energy reduction. The planning elements of the social function were classified into themes such as community function, improving the health of users, and scenery improvement. These results suggest that green infrastructure planning for particulate matter reduction requires approaches related to key concepts, such as resilience and sustainability. In particular, there is a need to apply green infrastructure planning elements in order to reduce exposure to particulate matter.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.3
• /
• pp.154-166
• /
• 2009

Database query and reporting tools, OLAP tools and data mining tools are typical front-end tools in Business Intelligence environment which is able to support gathering, consolidating and analyzing data produced from business operation activities and provide access to the result to enterprise's users. Traditional reporting tools have an advantage of creating sophisticated dynamic reports including SQL query result sets, which look like documents produced by word processors, and publishing the reports to the Web environment, but data source for the tools is limited to RDBMS. On the other hand, OLAP tools and data mining tools have an advantage of providing powerful information analysis functions on each own way, but built-in visualization components for analysis results are limited to tables or some charts. Thus, this paper presents a system that integrates three typical front-end tools to complement one another for BI environment. Traditional reporting tools only have a query editor for generating SQL statements to bring data from RDBMS. However, the reporting tool presented by this paper can extract data also from OLAP and data mining servers, because editors for OLAP and data mining query requests are added into this tool. Traditional systems produce all documents in the server side. This structure enables reporting tools to avoid repetitive process to generate documents, when many clients intend to access the same dynamic document. But, because this system targets that a few users generate documents for data analysis, this tool generates documents at the client side. Therefore, the tool has a processing mechanism to deal with a number of data despite the limited memory capacity of the report viewer in the client side. Also, this reporting tool has data structure for integrating data from three kinds of data sources into one document. Finally, most of traditional front-end tools for BI are dependent on data source architecture from specific vendor. To overcome the problem, this system uses XMLA that is a protocol based on web service to access to data sources for OLAP and data mining services from various vendors.