• Journal of the Korean Geotechnical Society
• /
• 제15권2호
• /
• pp.105-127
• /
• 1999

Application of the soil nailing method is continuously extended in maintaining stable excavations and slopes. Occasionally, however, ground anchor support system may not be used because of space limitations in urban excavation sites nearby the existing structures. In this case, soil nailing system with relatively short length of nails could be efficiently adopted as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in an excavation zone of the existing weak subsoils. Pretensioning the soil nails then, could play important roles in reducing deformations mainly in an upper part of the nailed-soil excavation system as well as improving local stability. In the present study, the analytical procedure and design technique are proposed to evaluate maximum pretension force and stability of the pretensioned soil nailing system. Also proposed are techniques to determine the required thickness of a shotcrete facing and to estimate probability of a failure against the punching shear. The predicted results are compared with the limited measurements obtained from the excavation site constructed by using the pretensioned soil nails. Based on the proposed procedure and technique, effects of the radius of a influence circle and dilatancy angle on the thickness of a shotcrete facing, bonded length and safety factors are analyzed. In addition, effects of the reduction of deformations expected by pretensioning of the soil nails are examined in detail throughout an illustrative example and FLAC$^{2D}$ program analysis.s.

• Journal of Information Technology Applications and Management
• /
• 제26권4호
• /
• pp.51-69
• /
• 2019

One of the most considerate phenomena of the era of the Fourth Industrial Revolution is the use of digital devices. Digitalization is rapidly advancing through all areas of industry and life. Customer journey with digitalization is looking totally different from previous customer journey. The research targets were users of fashion, automobiles, cosmetics and online shopping malls. We analyzed 300 people for each valid questionnaire. The results of the study are as follows. First, it has been proven that digital experience affects positive (+) impact on purchasing intention and positive (+) impact on recommending intention and negative impact (-) on switching intent and subsequently affects positive impact (+) to purchase and incase of switching intent, negative impact (-) to purchase. Unlike traditional methods such as SPC(Service Profit Chain), the Digital experience to Purchase process Chain (DPC) has been identified to be suitable in the digital age. Second, the digital satisfied group (5 score-very satisfaction) has shown same result as above. However the digital neutral group (even though 4 score- satisfaction in five-point scale), specially in a highly competitive industry, has different from the satisfied group and 3 score-normal is same as dissatisfied group. It means that this group is that If there is a high level of attractiveness of substitute goods, there is a high possibility of switching them. It has supported Jones and Sasser [1995] that there have been two types of loyalty of true long-term loyalty and what we call false loyalty in the highly competitive industry zone which is commoditization or low differentiation, many substitutes, low cost of switching. Identifying true loyalty and false loyalty is crucial to establishing a customer experience strategy. it is necessary to actively utilize long-term digital experiences strategy to increase the total satisfaction of digital experience through all of customer purchasing journey in order to enhance the digital customer experience. It is difficult to see the effect as a one-time event. It should be scaled over the entire customer purchase process over a long period of time, which can positively affect purchase intention, recommendation intention, and conversion intention. This is also why it is difficult for second-runners to overtake first-runners in a short period.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제38권3호
• /
• pp.235-242
• /
• 2014

To investigate pressure distributions on the shaft surface of the air bearing, the commercial CFD software was employed to study three different nozzle geometries to improve the nozzle performance: general drill-shaped, matched cube-shaped and trimmed exit nozzles. Under the influence of stagnation point, the maximum pressure was observed at the center of shaft surface for all cases. Owing to the blocking effect of a fine gap between the shaft surface and the nozzle exit, the drill-shaped nozzle has the rapid local pressure increase near the nozzle exit corner, generating the ring vortex in the radial direction within pressure ratio of 6.92, and its pressure becomes negative in a certain range of downstream. In comparison, the contoured nozzle showed a local pressure increase in the measured range of pressure ratios, but a negative pressure appeared within the pressure ratio of about 10. The trimmed nozzle was seemed to extend the high pressure zone near the stagnation point in the radial direction substantially, and no negative pressure was appeared in the whole range. Based on these observations, it is found that trimming nozzle exit becomes more effective for improving the performance than modifying the nozzle inside contour.

• Korean Journal of Environment and Ecology
• /
• 제24권6호
• /
• pp.638-647
• /
• 2010

This study was performed in order to analyze influences the actual vegetation between the communities of Pinus densiflora and Quercus mongolica in southern Korea to the species composition of the seed bank in the top soil. The soil samples were collected from the studied plots and transported to the Experimental Glasshouse at Department of Landscape Architecture, Yeungnam University and examined the germinated species individual numbers with species composition and germinated individual numbers by species. The overall germination status was the highest in the herbaceous layers than the layers of tree, sub-tree and shrub, respectively. There were no significantly different between numbers of species and individuals and between actual vegetation and seed bank in the two communities. The woody species marked in the seed bank as a pioneer or edge species than in the two communities which are in the stage of mid or late successional species. Although the plant species in the herbaceous layers was highly influenced to the species composition of the seed bank, but no significantly different was showed within the same forest zone and latitudes of Korean peninsula. As the pioneer or edge species of the actual vegetation possibly will be higher the buried in the top soil layer and this phenomenon will influence overall species composition in the seed bank population.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제20권2호
• /
• pp.247-258
• /
• 2014

To evaluate the influence of the external force components on the littoral currents in the Gusipo beach, Jeonbuk, West Coast of Korea where a wide tidal sand flat developed, a coupled hydrodynamic model considered real time tidal currents and wave-induced currents was constructed in which the EFDC for tides and tidal currents, the SWAN for waves and the SHORECIRC for wave-induced currents were used as the hindcasting models. A series of field observations for tides, tidal currents and incident waves were carried out and especially to observe the littoral currents in the tidal sand flat, the GPS mounted and light weight drogues were used. Also wind data were collected from the adjacent weather station. To analyze the littoral current components, the numerical drogue tracking results considered real time winds, tides and waves were compared with the field drogue data. The drift speed of numerical drogues was reproduced as the range of 68.0~105.2% compared with the field data and the velocity error of main direction component showed a good result as -16.7~10.0%. As a result, in the mild slope tidal flat including wide surf zone, the tides and winds were the major affection component of the littoral currents, on the other hand, the wave-induced currents seemed the minor component when the incident wave heights were relatively small.

• Journal of Korean Society of Environmental Engineers
• /
• 제31권7호
• /
• pp.531-540
• /
• 2009

In this study, thermo-gravimetric analysis(TGA) was used to investigate the effect of urea concentration and heating rate on the ammonia($NH_3$) formation process from urea solution. A newly designed pipe nozzle was inserted through a 1,000 N${\ss}$(C)/h oil firing boiler to compare the DeNOx efficiencies between the upward and downward nozzle. This experiment reveals the effect of path which an urea droplet goes through. Urea solution showed the same TGA graph without regard to the presence of oxygen. Heating rate had a great influence on the weight loss trend. But the concentration of urea solution between 10% and 40% did not affect so much the thermal decomposition temperature. Therefore, heating rate is more important factor on the thermal decomposition of urea than the concentration of urea solution. Three nozzles located at different positions showed similar DeNOx efficiencies such as 68.1%, 71.8%, 70.8% at the same temperature. Even though urea solution was injected for the same zone, the injection direction made much difference in DeNOx efficiency. A upward nozzle showed 68.1% and downward nozzle 9.5%. This results illustrate the importance of heating rate.

• Journal of Life Science
• /
• 제23권11호
• /
• pp.1409-1414
• /
• 2013

Lymph node (LN) is the sites where mature lymphocytes become stimulated to respond to invading pathogens in the body. Lymphocytes screen the surfaces of pathogen-carrying antigen-presenting cells for cognate antigens, while moving along stromal structural back bone. Fibroblastic reticular cells (FRC) is stromal cell forming the 3 dimensional structure networks of the T cell rich zones in LN, and provide a guidance path for immigrating T lymphocytes. In these cooperative environments, the cell to cell bidirectional interactions between FRC and T cells in LN are therefore essential to the normal functioning of these tissues. Not only do FRCs physically construct LN architecture but they are essential for regulating T cell biology within these domains. FRC interact closely with T lymphocytes, is providing scaffolds, secreting soluble factors including cytokine in which FRCs influence T cell immune response. More recently, FRC have been found to induce peripheral T cell tolerance and regulate the extent to which newly activated T cells proliferate within LN. Thus, FRC-T cell crosstalk has important consequences for regulating immune cell function within LN. In addition, FRC have profound effects on innate immune response by secreting anti-microbial peptides and complement, etc in the inflammatory milieu. In summary, we propose a model in which FRC engage in a bidirectional touch to increase the T cell biological efficiency between FRC and T cells. This collaborative feedback loop may help to maintain tissue function during inflammation response.

• Journal of Korean Neurosurgical Society
• /
• 제30권sup1호
• /
• pp.44-50
• /
• 2001

Objectives : The objective of this study was to investigate the role of postoperative three dimensional short-range magnetic resonance angiography(3D-TOF MRA) in predicting the clinical outcomes following microvascular decompression(MVD) for the treatment of a hemifacial spasm(HFS). Material and Method : Postoperative magnetic resonance(MR) imaging was performed on 123 patients with a HFS between March 1999 and May 2000. All patients who had postoperative MR imaging were undertaken preoperative MR imaging. Of the 123 patients, 122 patients were included in this retrospective study. The degree of the detachment of vascular contact, and change of the position of offender were determined by pre- and postoperative 3D-TOF MRA. These findings were compared with the surgical findings and clinical outcomes. Results : Of 122 patients who had successful MVD, clear decompression of offenders of the root entry zone(REZ) of facial nerve was found in 106 patients(86.9%), partial decompression in 10 patients(8.2%) and contact of offenders to the REZ of facial nerve in 6 patients(4.9%) by the postoperative 3D-TOF MRA. Our patients demonstrated that the types of offender did not influence with the degree of decompression of REZ of facial nerve and with surgical outcomes(p>0.05). Also, there was no significant relationship between the degree of decompression of the REZ of facial nerve from offenders and an improvement of symptoms(p>0.05). Futhermore, there was no significant relationship between the degree of decompression of the REZ of facial nerve from offenders and an improvement time (p>0.05). Conclusion : Our data suggests that MVD of facial nerve alone may not be sufficient to resolve the symptoms in all patients with hemifacial spasm. Therefore, another unknown factors besides vascular compression may be involved to cause symptoms in certain patients and it may be necessary to remove these factors with MVD simultaneously to obtain the resolution of symptom.

• Korean Journal of Social Welfare Studies
• /
• 제49권1호
• /
• pp.221-262
• /
• 2018

This study aims to explore life experiences associated with poverty and discrimination in processes of growth, career exploration, entry into the labor market, and career accumulation of the working high school graduate youths. With this exploration, we also intent to grasp their difficulties and needs, thus look for policy tasks for them. The analysis is based on qualitative case study. The results are following. Typical working high school graduate youths choose not to go on to university under the influence of unfavorable economic situation of the original families. They enter the labor market without enough career exploration and try to continue working mainly in low-income and unskilled jobs. They usually work long hours to increase incomes, thus, do not have enough time to invest on their own human resources. They locate in a vicious circle of income poverty, time poverty, and skill poverty, but rarely protected by existing employment and income support programs. It is necessary to improve or introduces policy packages including labor market transition support for the high school graduate, education, training, and career exploration support, income support for the working poor, social network support, and support for reducing the dead zone of social insurances.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제23권6호
• /
• pp.613-619
• /
• 2017

Recently, the size of container ships has been progressively increasing, and much attention is required for safe navigation in shallow areas such as coastal waters and ports due to increases in draft. It is necessary to understand the characteristics of ship motion not only in still waters but also with waves. Especially in shallow regions, squat due to the vertical movement of the ship can be an important evaluation factor for the safe navigation, and wave drift force acting in the horizontal direction can have a great influence on the maneuverability of a ship. In this study, a numerical simulation using computational fluid dynamics has been performed for the wave exciting force acting in the vertical direction and the wave drift force acting in the horizontal direction for a very large container vessel sailing in shallow zone. As a result, it was found that total resistance in still waters greatly increased in shallow water. Wave drift force was shown to decrease given longer wavelengths regardless of water depth. It was observed that the wave exciting force in shallow water was considerably larger than at other water depths. As wave height against the central part of the ship lowered, the aft side rose.