• Journal of the Korean GEO-environmental Society
• /
• v.17 no.7
• /
• pp.15-25
• /
• 2016

In the present work, a number of advanced three-dimensional (3D) parametric finite element numerical analyses have been conducted to study the behaviour of single piles and pile groups in consolidating ground from coupled consolidation analyses. Single piles, $4{\times}4$ and $6{\times}6$ piles inside groups with a spacing of 2.5D were considered, where D is the pile diameter. It has been found that dragload and downdrag on the piles developed rather quickly at the early stage of consolidation. However, when the degree of consolidation was more than 50~75%, only little increases of dragload and downdrag were induced on the pile. Negative Skin Friction (NSF) on the pile in the fill layer was mobilised quickly and remained constant throughout further consolidation. The development of NSF is influenced both by the relative shear displacements at the pile-soil interface and the vertical effective soil stresses during consolidation. The former governed the early stage of consolidation and the latter affected the later stage of consolidation. The vertical effective soil stresses adjacent to the piles were reduced due to the shear stress transfer at the pile-soil interface, in particular for piles inside the pile groups. The range of NSF influence zone concerning the reductions of the effective vertical soil stresses was about 20D measured from the piles in the horizontal direction. On the contrary, the effective horizontal soil stresses acting on the piles were similar to those at the far field.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.395-399
• /
• 2016

Background: Whether ambient exposure to environmental pollutants leads to hematopoietic malignancies such as multiple myeloma (MM) remains to be ascertained. Therefore, we aimed to investigate the immunotyping distribution of serum monoclonal paraprotein and the environmental influence on MM and monoclonal gammopathy of uncertain significance (MGUS) in the Taiwanese population. Materials and Methods: Serum protein electrophoresis with immunosubtraction by the capillary zone electrophoresis method was performed as primary screening for MM and MGUS. Clinical, pathological, and residence data of patients were also obtained. Results: From August, 2013 to June, 2015, a total of 327 patients underwent serum protein electrophoresis with immunosubtraction. Among these, 281 demonstrated no remarkable findings or non-malignant oligoclonal gammopathy, 23 were detected to have MGUS, 18 were identified as MM, and a further 5 were found as other malignancies. The most frequent immunotyping distribution of serum monoclonal paraprotein was IgG kappa (54.3%, n=25), followed by IgA lambda (15.2%, n=7) and IgG lambda (10.9%, n=5) in subjects with gammopathy. Additionally, it was shown that the elderly (OR: 4.61, 95% CI: 1.88-11.30, P<0.01) and males (OR: 2.04, 95% CI: 1.04-4.02, P=0.04) had significantly higher risk of developing MM and MGUS. There was no obvious impact of environmental factors on the health risk of MM and MGUS evolution (OR: 0.77, 95% CI: 0.40-1.50, P=0.49). Conclusions: The most frequent immunotyping distribution of serum monoclonal paraprotein included IgG kappa, IgA lambda and IgG lambda in MM and MGUS in the Taiwanese population. The elderly and male subjects are at significantly higher risk of MM and MGUS development, but there was no obvious impact of environmental factors on risk.

• Journal of Mechanical Science and Technology
• /
• v.18 no.5
• /
• pp.770-779
• /
• 2004

This paper describes the micro cutting of wear resistant tungsten carbides using PCD (Poly-Crystalline Diamond) cutting tools in performance with SEM (Scanning Electron Microscope) direct observation method. Turning experiments were also carried out on this alloy (V50) using a PCD cutting tool. One of the purposes of this study is to describe clearly the cutting mechanism of tungsten carbides and the behavior of WC particles in the deformation zone in orthogonal micro cutting. Other purposes are to achieve a systematic understanding of machining characteristics and the effects of machining parameters on cutting force, machined surface and tool wear rates by the outer turning of this alloy carried out using the PCD cutting tool during these various cutting conditions. A summary of the results are as follows: (1) From the SEM direct observation in cutting the tungsten carbide, WC particles are broken and come into contact with the tool edge directly. This causes tool wear in which portions scrape the tool in a strong manner. (2) There are two chip formation types. One is where the shear angle is comparatively small and the crack of the shear plane becomes wide. The other is a type where the shear angle is above 45 degrees and the crack of the shear plane does not widen. These differences are caused by the stress condition which gives rise to the friction at the shear plane. (3) The thrust cutting forces tend to increase more rapidly than the principal forces, as the depth of cut and the cutting speed are increased preferably in the orthogonal micro cutting. (4) The tool wear on the flank face was larger than that on the rake face in the orthogonal micro cutting. (5) Three components of cutting force in the conventional turning experiments were different in balance from ordinary cutting such as the cutting of steel or cast iron. Those expressed a large value of thrust force, principal force, and feed force. (6) From the viewpoint of high efficient cutting found within this research, a proper cutting speed was 15 m/min and a proper feed rate was 0.1 mm/rev. In this case, it was found that the tool life of a PCD tool was limited to a distance of approximately 230 m. (7) When the depth of cut was 0.1 mm, there was no influence of the feed rate on the feed force. The feed force tended to decrease, as the cutting distance was long, because the tool was worn and the tool edge retreated. (8) The main tool wear of a PCD tool in this research was due to the flank wear within the maximum value of $V_{max}$ being about 260 $\mu\textrm{m}$.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.2
• /
• pp.50-61
• /
• 2000

The ground around the portal of a tunnel is the most typical part showing the 3-dimensional mechanical behavior in the tunnel. The portal slope is constructed at the weathered soft rock-mass, and remains as a potential sliding mass. The slope failure around the tunnel portal may happen drastically and induce the great disaster; hence, for the permanent stability several special techniques are required. To solve this problem, the ground around the tunnel portal may be excavated in the arch shape to develop the arching effect in horizontal direction. With the arch-type portal slope, one can reduce considerably the excavation mass and the damage of environments. This approach has not been attempted yet due to the lack of understanding and the well-defined analyzing method, so the retaining wall type portal is more universal. The 3-dimensional finite element analyses were carried out to prove that the arch type is more advantageous in safety and cost than the right angle type. The influence of the tunnel construction sequence and the strength of the rock-mass on the slope stability was investigated by focusing on the maximum shear strain in the slope, and the yield zone at the tunnel face.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.5
• /
• pp.529-545
• /
• 2012

Three-dimensional (3D) finite element analyses have been performed to study the behaviour of a single pile to open face tunnelling in stiff clay. Several key factors such as tunnelling-induced ground and pile settlement, and shear transfer mechanism have been studied in detail. Tunnelling resulted in the development of pile settlement larger than the Greenfield soil surface settlement. In addition, due to changes in the shear transfer between the pile and the soil next to the pile with tunnel advancement, axial force distributions along the pile change drastically. The apparent allowable pile capacity was reduced up to about 30% due to the development of tunnelling-induced pile head settlement. The skin friction on the pile was increased with tunnel advancement associated with the changes of soil stresses and ground deformation and hence axial pile force distribution was reduced. Maximum tunnelling-induced tensile force on the pile was about 21% of the designed pile capacity. The zone of influence on the pile behaviour in the longitudinal direction may be identified as ${\pm}1$-2D (D: tunnel diameter) from the pile centre (behind and ahead of the pile axis in the longitudinal direction) based on the analysis conditions assumed in the current study. Negative excess pore pressure was mobilised near the pile tip, while positive excess pore pressure was computed at the upper part of the pile. It has been found that the serviceability of a pile experiencing adjacent tunnelling is more affected by pile settlement than axial pile force changes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.2
• /
• pp.261-266
• /
• 1992

Yearling replacement heifers were used in a two-year study at the Fort Stanton Experimental Ranch near Capitan, New Mexico, USA to compare frequency (once versus three times weekly) of feeding a cottonseed cake supplement. The study involved periods of 130 days (January 4 through May 14) in 1985, and 146 days (December 4 through April 29) in 1986. In each year, supplemental periods were just before the breeding season (natural breeding in multiple-sire groups) that lasted for 75 days during first year and 60 days during second year. During the first year, all (83) heifers (Angus $\times$ Hereford) were supplemented at a level equivalent to 45 kg/head daily and during second year, all (69) heifers (Angus $\times$ Hereford, Hereford) were fed at a level equivalent to .68 kg/head daily. In the first year, heifers were sorted by initial weight into two replications, i.e., those weighing under 223 kg were placed in replicate 1 and those weighing over 223 kg were placed in replicate 2. During the second year, heifers were sorted by breed into two replications, i.e., Angus $\times$ Hereford heifers were placed in replicate 1 and Hereford heifers in replicate 2. Each year, half of the heifers in each replication were supplemented once weekly and the other half three time weekly. Weight gains of heifers were similar for the two treatments over both years of study. During the first year, weight gains for heifers supplemented once or thrice weekly (.23 vs .21 kg daily, respectively) did not differ (p>.05) and the same trend for the second year (.15 vs .16 kg daily, respectively) was observed. Similarly, breeding performance was consistent with weight gains and no difference (p>.05) between treatments was observed either year. Lower conception rates during the second tear of study (92 vs 72% for years 1 and 2, respectively) were due mainly to involvement of Hereford heifers that had an average weight of 232 kg at the start of breeding season and conception rate of 54% (averaged across both supplemental treatments). Based on the combined results of both trials, frequency of supplementation did not affect growth rate of yearling heifers nor did it influence their subsequent conception rate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1818-1827
• /
• 2018

Objective: The objective of this work was to determine the prevalence of the pathologies that caused the condemnation of pig carcasses in an area of intensive pig farming and Mediterranean climatology and to evaluate their influence in a risk-based inspection procedure for slaughterhouses. Methods: A retrospective observational investigation was carried out from 2002 to 2016 into the pathological processes that caused the condemnation of pig carcasses in a slaughterhouse from South-eastern Spain. The seasonal effect on the causes of condemnation carcass was reported. Negative binomial model was used to evaluate the effect of season on the rate of antemortem rejections and post-mortem condemnations. Histopathological examinations were performed to confirm the diagnosis. Results: The risk of antemortem rejections (0.0564%) was significantly greater in summer (risk ratio [RR] = 1.57). Autumn was associated with higher rate (RR = 1.69) of the total postmortem condemnations (0.1046%). Significantly higher rates of pronounced anaemia (0.0111%) were observed in summer (RR = 3.20). The main causes of anaemia were observed gastroesophageal ulcers and haemorrhagic enteropathies. Significantly highest risk of erysipelas (0.0074%) were observed in autumn (RR = 5.485). About other zoonosis, only eight cases (0.0013%) of carcasses were declared unfit due to tuberculosis lesions. Porcine muscular cysticercosis was not detected. Nevertheless, nonspecific causes such as generalized infections and emaciation represented the half of the condemned carcasses (50.90%). Conclusion: The pathologies leading to the condemnation of carcasses in this study can be considered representative of the pathologies that affect the pig population from a region with a high intensive production and Mediterranean climatology because this slaughterhouse receives a lot of animals from many farms of different size in a high intensive pig production zone (Mediterranean region). Increased knowledge of environmental factors that may foment the appearance of the diseases is essential for implementing inspection programs based on risk assessment in pig's slaughterhouses.

• Journal of Korea Water Resources Association
• /
• v.48 no.1
• /
• pp.9-21
• /
• 2015

This study examined pollution level of sediment in Sookchun lake, and studied dredging validity by examining phosphorous release characteristics on surface polluted soil. Total phosphorous, the principal cause of algal blooms, exceeded dredging assessment standards regarding Daechung lake (1.5 mg/g) at all points. Also at all points, total nitrogen exceeded the dredging assessment standard regarding Paldang Lake (1.1 mg/g), but fell short of the standard regarding Daechung lake (3.0 mg/g). Dredging zone was suggested in this study is Chuso water body (WS-6~WS-12) in Sookchun lake. In relation to sediment pollution levels measured at different depths, LOI tended to decrease as it became deeper. The concentrations of T-N varied depending upon the depth as well as points, but no regular pattern was observed. The depth and site did not significantly influence T-P. From the results of phosphorous release tests, it was shown that total phosphorous release flux was calculated to be $7.2{\sim}15.4mg/m^2/d$ for anaerobic condition, $0.5{\sim}2.0mg/m^2/d$ for aerobic condition and $2.0{\sim}4.1mg/m^2/d$ for facultative condition. Release flux and T-P concentration of surface sediments had positive correlation ($R^2$ 0.7871). And The corelation between release flux and DO condition in reactor had strong negative correlation ($R^2$ 0.8824).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.3
• /
• pp.244-252
• /
• 2007

A long-term change in the evaporation rate have an influence on the hydrologic processes at the interface between the land surface-air and crop yield. Several previous studies have reported declines in pan evaporation rate, while actual evaporation rate is expected to increase due to anthropogenic global change in the future. The decreasing trend of pan evaporation rate might be involved with global warming and accordingly the trend of annual pan evaporation rate also needs to be checked here in Korea. In this study, 14 points of pan evaporation observation are intensively studied to investigate the trend of pan evaporation for the time period of 1970-2000. Annual pan evaporation is decreasing at the rate of 1.6mm/yr, which corresponds to approximately 50mm for 30 years. Annual pan evaporation rate is larger by $\sim10%$ at the coastal area and decreasing rate is faster as -2.46 mm/yr per year, while that is -0.82 mm/yr per year at the in-land area. The results of the Mann-Kendall trend test shows 4 points are decreasing and 10 points are unchanged with 95% confidence interval. But national annual average values show the decreasing trend of pan evaporation rate as a whole, which corresponds to general trend all over the world. This study will contribute to a variety of studies on water resources, hydrology, agricultural engineering, meteorology, and coastal engineering in association with future global climate change.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.1
• /
• pp.81-96
• /
• 2006

This study aimed to investigate the sociocultural phenomena which affected to clothing change in 1650-1900 and to examine the features of men's necktie in the western art. For this study, information about historic neckwear is obtained from the visual evidence of painted or engraved portraits, contemporary written sources. The covered area of this study was Europe mainly England and France. For this process, research steps were as follows : 1. Investigating the sociocultural phenomena which affect to clothing change through 1650-1900 and analysis of men's clothing and appearance. 2. Finding the changing characteristics of neckties including it's different types, shapes, knots, colors and materials and analyzing similarities and differences of neckties by the times. 3. Examining necktie as one of important and representative icons of male gender identity. The results of the study was as follows: 1. In 1660-1900, men's fashion was simplified in color and detail due to the influence of practical Puritanism and matured civil culture. And British men's fashion spreaded throughout whole European countries and get popularity. 2. In 1650-1720, there were band, cravat and steinkirk. And expecially cravatier, a expert custodian of cravats, was appeared in that period. In 1720-1800, there were stock, solitaire and cravat. In 1800-1850, neckwear were popularized and got various sizes and types up to shape and size of chemise collars. Black stock, scarf cravat and shawl cravat were popular and terms of 'necktie' were used for an certain neckcloth shape. And abundant literature for necktie were published thanks to the development of printing technology in that period. In 1851-1900, the leady-made neckties were spreaded and there were changes in shape, length, knot of necktie up to V-zone formed with shirt's collars and vest types. Neckwear was gradually evolving through four distinct styles, bow tie, scarf or neckerchief, Ascot and four-in-hand. 3. After the mid-l7th Century, as civil culture matured and splendid and extravagant colorful men's wear disappeared, British men's fashion spreaded throughout whole European countries and got popularity. The necktie become an essential ornamental accessory of men's fashion and one of important and representative icons of male gender identity.