• 제목/요약/키워드: Influence Zone

검색결과 879건 처리시간 0.027초

모래기둥의 설치 간격에 관한 연구 (A Study on the Spacing between the Sand Drain Wells)

  • 김홍택
    • 한국지반공학회지:지반
    • /
    • 제8권1호
    • /
    • pp.67-80
    • /
    • 1992
  • 본 연구에서는 시간에 따른 공사하중의 크기 변화가 다양할 경우에, smear zone및 well resistance의 영향을 모두 고려하여 설계시에 요구되는 모래기등 영향원의 반지름(즉, 모래기둥의 설치간격)을 결정하기 위한 해석법을 제시하였다. 이를 위해 단순선형점증하중의 경우에 대해 제시된 Olson의 해석법(smear zone 및 well resistance의 영향을 모두 무시한 경우)을 변형하였으며, 아울러 제시된 해석법을 토대로 설계에 관련된 여러가지 변수가 모래기end의 설치간격에 미치는 영향을 조건별로 분석하였다.

  • PDF

철도레일 테르밋 용접부의 기계적 특성 향상 방안에 관한 연구 ((A) Study on the Mechanical Properties Improvement of Thermite Welded Zone of Railroad Rail)

  • 최상규;박성상;백응률;전봉길
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.2101-2106
    • /
    • 2011
  • It is reported that about more than 45% of damage shown in railroad rails include breakage of rail end which cross the center of Thermit welded zone. Thermite welding is always accompanied by numerous aluminum oxide and secondary inclusions, which may have a negative influence on the ductility and toughness of the weld metal. In this study the aluminum powder recycled by waste aluminum can was used for iron oxide generated after the process of welding rod and the remain aluminum was reduced by minimizing the quantity of aluminum. And complete dissolution was induced by using ferro Mn powder as the additive element. This study reviewed the applicability of heat treatment in the welded zone of rail using ceramic heating pad by carrying it out. This study could observe the improvement of the mechanical characteristics (UTS and elongation) and the changes of failure mechanism from brittleness to ductility. It could be found that improved strength and elongation result from pearilte fine structure.

  • PDF

Distribution of Microzooplankton across the Frontal Systems of the Southern Ocean

  • Lee, Hak-Young;Cho, In-Sook;Kim, Jong-Won;Richard M. Greene
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제3권1호
    • /
    • pp.1-9
    • /
    • 1999
  • Microzooplankton was analysed between $40^{\circ}s$ to $53^{\circ}s$S and $140^{\circ}E$ to $146^{\circ}E$ of the Sourthern Ocean from November 18 to November 30, 1995 to investigate the influence of frontal systems. The density and carbon biomass of microzooplankton were clearly associated with frontal systems, and at least 4 different communities were identified. The Subtropical Convergence Zone and Antarctic Polar Front Zone were the major biological boundaries recognized in the Southern Ocean. Ciliates predominated other microzooplankton in density and carbon biomass. Non-tintinnid ciliates occupied more than 70% of the total microzooplankton, and Laboea spp. was the major component of the non-tintinnid ciliates. The density and carbon biomass showed a decreasing tendency toward south from $40^{\circ}S$ to the $53^{\circ}S$ transect. The ecological importance of a frontal zone is confirmed by the microzooplanktonic data obtained from this study.

  • PDF

크맆피드연삭에서 공작물로 유입되는 에너지 비율 (Energy Partition to Workpiece in Creep feed Grinding)

  • 홍순익
    • 한국생산제조학회지
    • /
    • 제7권6호
    • /
    • pp.42-48
    • /
    • 1998
  • This paper is concerned with the heat flux distribution and energy partition for creep-feed grinding. From measurements of transient grinding temperatures in the workpiece sub-surface using an embedded thermocouple, the overall energy partition to the workpiece was estimated from moving heat source theory for a triangular heat flux distribution as 3.0% for down grinding and 4.5% for up grinding. The higher energy partition for up grinding can be attribute to the need to satisfy thermal compatibility at the grinding zone. The influence of cooling outside the grinding zone can be analytically taken into account by specifying convective heat transfer coefficients on the workpiece surface ha ahead of the heat source (grinding zone) and hb behind the heat source. The smaller energy partition together with slightly lower grinding power favors down grinding over up grinding.

  • PDF

Integrated Phytoplankton Data of the west Pacific Sector of the Southern Ocean: 149-148 $^{\circ}E$ transect

  • Lee Hak Young;Cho In Sook;Greene Richard M.;Kim Jong Won
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제2권1호
    • /
    • pp.21-28
    • /
    • 1998
  • A total of 94 taxa were identified from the Southern Ocean, 140-148 $^{\circ}E$ and 40-53 $^{\circ}S$, as an early austral summer phytoplankton. They were 53 diatoms, 37 dinoflagellates, 2 silicoflagellates, 1 prymnesiophyte, and 1 coccolithophorid. Integrated cell numbers of nanoplankton dominated microphytoplankton from 8 stations, especially from Subantarctic zone, but integrated biomass was lower than microphytoplankton. Integrated cell numbers of diatoms dominated dinoflagellates, coccolithophorids, and prymnesiophyte, but integrated biomass of microphytoplankton were dependent to the biomass of dinoflagellates except north of the Subtropical convergence zone and south of the Antractic convergence zone. Phytoplankton community changed across the fronts and 3 different communities were observed. Fronts seem to influence on the phytoplankton community from the west Pacific Sector of the Southern Ocean.

  • PDF

YAG 레이저에 의한 SK5 표면경화 특성 (Surface Hardening Characteristics of SK5 Steel by Pulsed YAG LASER)

  • 강형식;문종현;전태옥;박홍식
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1995년도 추계학술대회 논문집
    • /
    • pp.921-924
    • /
    • 1995
  • Case hardening behavior of carbon tool steel(SK5) was investigated after pulsed YAG laser irradiation. In the case od beam passes,martensite formed in the melt zone and in former pearlite regions of the austenitization zone exhibits vary high Vickers hardness values. The molten depth and width decrease as the beam power density increase. The influence of depth and width of color painted specimen was also investigated. The molten zone of the black painted specimen was the largest. The were loss of the black painted specimen was smaller than any other painted or raw material.

  • PDF

Study on deformation law of surrounding rock of super long and deep buried sandstone tunnel

  • Ding, Lujun;Liu, Yuhong
    • Geomechanics and Engineering
    • /
    • 제16권1호
    • /
    • pp.97-104
    • /
    • 2018
  • The finite difference software Flac3D is used to study the influence of tunnel burial depth, tunnel diameter and lateral pressure coefficient of original rock stress on the stress and deformation of tunnel surrounding rock under sandstone condition. The results show that the maximum shear stress, the radius of the plastic zone and the maximum displacement in the surrounding rock increase with the increase of the diameter of the tunnel. When the lateral pressure coefficient is 1, it is most favorable for surrounding rock and lining structure, with the increase or decrease of lateral pressure coefficient, the maximum principal stress, surrounding displacement and plastic zone range of surrounding rock and lining show a sharp increase trend, the plastic zone on the lining increases with the increase of buried depth.

크리피드연삭에서 공작물로 유입되는 에너지 비율 (Energy Partition to Workpiece in Creep feed Grinding)

  • 김남경;박호성;홍순익;송지복
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 춘계학술대회 논문집
    • /
    • pp.799-804
    • /
    • 1997
  • This paper is concerned with the heat flux distribution and energy partition for creep-feed grinding. Form measurements of transient grinding temperatures in the workpiece sub-surface using an embeded thermocouple, the overall energy partition to the workpiece was estimated form moving heat source theory for a triangular heat flux distribution as 3.0% for down grinding and 4.5% for up grinding. The higher energy partition for up grinding can be attributed to the need to satisfy thermal compatibility at the grinding zone. The influence of cooling outside the grinding zone can be analytically taken into account by specifying convective heat transfer coefficients on the workpiecs surface h /sab a/ heat source (grinding zone) and h /sab b/ behind the heat source. The smaller energy patition together with slightly lower grinding power favors down grinding over up grinding.

  • PDF

Multiscale simulation based on kriging based finite element method

  • Sommanawat, Wichain;Kanok-Nukulchai, Worsak
    • Interaction and multiscale mechanics
    • /
    • 제2권4호
    • /
    • pp.353-374
    • /
    • 2009
  • A new seamless multiscale simulation was developed for coupling the continuum model with its molecular dynamics. Kriging-based Finite Element Method (K-FEM) is employed to model the continuum base of the entire domain, while the molecular dynamics (MD) is confined in a localized domain of interest. In the coupling zone, where the MD domain overlaps the continuum model, the overall Hamiltonian is postulated by contributions from the continuum and the molecular overlays, based on a quartic spline scaling parameter. The displacement compatibility in this coupling zone is then enforced by the Lagrange multiplier technique. A multiple-time-step velocity Verlet algorithm is adopted for its time integration. The validation of the present method is reported through numerical tests of one dimensional atomic lattice. The results reveal that at the continuum/MD interface, the commonly reported spurious waves in the literature are effectively eliminated in this study. In addition, the smoothness of the transition from MD to the continuum can be significantly improved by either increasing the size of the coupling zone or expanding the nodal domain of influence associated with K-FEM.

FRP보강 그라우팅에 의한 단층대의 터널 안정성 분석 및 설계 사례 연구 (A Case Study of Analysis and Design for the Tunnel Stablization in Fault Zone by FRP Reinforced Grouting Method)

  • 박종호;최용기;박영목;권오엽;이재봉
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.121-128
    • /
    • 2001
  • This is a case study of stability analysis and reinforcement design for the tunnel where the collapse of the entrance slops occured along the fault zone developed in the bed rock. According to the site investigation, the main factor of sliding is the influence of fault gouge and heavy rainfall. Considering the in-situ condition, the versatile reinforcement methods is needed, and so the close investigation on the site area was accompanied with the stability analysis of tunnel and slops. The FRP(Fiberglass reinforced plastic) grouting method improved the defect of Steel Umbrella Arch Method, such as oxidation, low work efficiency, the material's heavy weight, is adapted as the reinforcement methods.

  • PDF