• 한국환경복원기술학회지
• /
• 제12권3호
• /
• pp.130-141
• /
• 2009

The spatial range of EIA is mainly related to landscape ecological factors such as topography, geology, animals, and plants. Problems were detected involved land, soil, noise, oscillation, the atmosphere, animals, and plants in the natural-environment. First of all, the current EIA lacks explicit spatial ranges and sections in terms of scientific exactitude and objectivity for assessment. Secondly, there are overlapping influence-area problems resulting in cumulative impacts of unit developments that accumulate. Finally, some developments have no regard for ecological and conservational value in relation to determining which effect ecological stability, and which should be regarded as Regional Ecological Resources. Therefore, this study suggests that EIA should be improved in the following manner. First, the standard classification of landscape unit for analysis should be established 10 regulate each spatial range on a wide-landscape scale. Secondly, the impacts resulting from the interaction of overlapping influence-area developments between individual development should be assessed. Third, Minimization of the of the environmental effects is needed by applying the cumulative effects to the influence-area where developments occur in the same time or in a sequence. Fourth, individual characteristics of landscape elements such as roads, rivers, and green networks need to be considered separately in the analysis. Finally, regional ecological habitats should be included in the analysis in order to achieve stable ecosystems.

• 대한방사선치료학회지
• /
• 제26권2호
• /
• pp.183-189
• /
• 2014

목 적 : 조영제는 CT모의치료시 정상조직과 악성종양을 구분하는데 뛰어난 대조도를 제공하기 때문에 CT모의치료에 널리 사용하고 있다. 하지만 조영제는 치료계획 CT에서 일시적으로 존재하기 때문에, 치료계획과 실제 치료 사이에는 Hounsfield Unit(HU)의 차이가 발생하게 된다. 이에 본 연구에서는 조영제 사용으로 인한 HU의 변화가 양성자 치료계획에 미치는 영향을 확인 하고자한다. 대상 및 방법 : 20명의 간암 환자에게서 Phase에 따른 HU값의 변화를 측정하였다, 그리고 5명의 양성자치료계획에서 HU변화에 따른 Range와 Spread-Out Bragg peak(SOBP)의 변화를 살펴보았다. Hand made water phantom을 이용하여 깊이와 HU의 변화에 따른 Range와 SOBP의 변화를 확인하였다. 결 과 : 20명 간암 환자의 HU 변화(Pre contrast, Arterial phase, Porta phase)는 간 조직에서 ($58{\pm}5.7$, $75{\pm}9.5$, $117{\pm}14.6$)이었으며 대동맥에서($40{\pm}6.1$, $279{\pm}49.0$, $154{\pm}22.8$)이었다. 5명의 간암 양성자치료계획에서 HU 변화에 따른 Range 변화는 평균 2.5 mm, SOBP 변화는 평균 1.4 mm 이었다. Hand made water phantom study에서는 HU가 증가함에 따라 Range는 감소되었고 SOBP는 줄어들었다. 결 론 : 양성자 치료계획에서 HU값의 변화는 양성자 Range와 SOBP를 변화시켰다. 실제 양성자 빔에서 HU 변화에 따른 Range와 SOBP의 변화에 대한 추가적인 연구가 필요할 것으로 사료 된다.

• 한국터널지하공간학회 논문집
• /
• 제21권6호
• /
• pp.825-835
• /
• 2019

터널 설계 시 조사를 통하여 지반을 여러 개의 등급으로 분류한 후 지보패턴표에 따라 해당 지보시스템을 적용하게 된다. 그러나 암반 등급을 기준으로 한 단순한 패턴 적용방식은 암반 등급 경계부에서 발생하는 종방향 응력 전이를 고려하지 못한다. 본 연구는 NATM 터널의 종방향 암반 등급 변화부에서 응력 변화를 추정하기 위한 3차원 수치해석을 실시하였으며 Influence Line (영향선) 및 Trend Line (경향선)을 이용하여 하중전이 영향권을 파악하고자 하였다. 연구 결과 터널 굴착방향으로 암반 등급이 하향 변화하면 등급변화 경계를 중심으로 강성이 약한 암반에서 강성이 큰 암반 방향으로 0.35~0.7D 범위에서 응력 전이가 발생하며 이를 고려하여 암반 등급의 종방향 하향 변화부에서는 연구결과의 0.35~0.7D 영향권을 감안하여 안전측으로 1.0D 정도의 하향패턴을 추가 적용하는 것이 필요하다.

• 대한가정학회지
• /
• 제44권12호
• /
• pp.93-103
• /
• 2006

The purpose of this study was to understand the consumption of adolescents by investigating the influences on their clothing purchasing influence and the effects of family communication and clothing interest. The questionnaires used for the were conducted for this study analysis was and were distributed to four Middle schools and two High schools which were located in Seoul. and 576 responses questionnaire were used for data analysis. Using SPSS package, factor analysis, reliability, Pearson correlation, regression, ANOVA, Duncan's Multiple Range test, and t-test were applied. The study results of this study are as follows: First, the influence of clothing purchasing influence of adolescents was higher than the parents' purchasing influence. Second, there were negative correlations between two levels of family communication, controlled and opened communication. But, but positive correlations between controlled communication and clothing interest, and between clothing interest and purchasing influence there were positive correlations. Third, there were partially significant differences among demographic factors and levels of communications, clothing interest and purchasing influence. Fourth, for male students social status, opened communication, and clothing interest had an effect on purchasing influence for male students and for female students clothing interest and both controlled and opened communication influenced were affecting purchasing influence for female students.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.504-507
• /
• 2006

Airborn Lidar technology has been applied to diverse applications with the advantages of accurate 3D information. Further, Lidar intensity, backscattered signal power, can provid us additional information regarding target's characteristics. Lidar intensity varies by the target reflectance, moisture condition, range, and viewing geometry. This study purposes to generate normalized airborne LiDAR intensity image considering those influential factors such as reflectance, range and geometric/topographic factors (scan angle, ground height, aspect, slope, local incidence angle: LIA). Laser points from one flight line were extracted to simplify the geometric conditions. Laser intensities of sample plots, selected by using a set of reference data and ground survey, werethen statistically analyzed with independent variables. Target reflectance, range between sensor and target, and surface slope were main factors to influence the laser intensity. Intensity of laser points was initially normalized by removing range effect only. However, microsite topographic factor, such as slope angle, was not normalized due to difficulty of automatic calculation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.848-851
• /
• 2004

This paper studied a method for minimizing the noise level emitted from range hoods. Range hoods were used for discharging various hazardous materials generated during household cooking to the outdoors, thus preventing them from being diffused through rooms in the house since they are the main cause of air pollution within dwellings. This study assumed that static pressure was not applied at the discharge outlet of the range hood. As such, the range hood was installed on the wall without the use of a connecting duct or other connectors attached to its discharge outlet. The vibration having the greatest influence on the noise level was determined by measuring the vibration at the front side of the hood where the acoustic omission was at its maximum. A method was then proposed to reduce the noise by simply suppressing the vibration at the vibrating part.

• 대한정형도수물리치료학회지
• /
• 제6권2호
• /
• pp.31-38
• /
• 2000

The influence of the genu varum and the genu valgum in two groups of twenty adult man with deformation on hip joint, knee joint, ankle joint is as follows. 1. Each and all, the statistics that measure tibiofemorial angle indicated the group of the genu varum 168 1.42 and the group of the genu valgum 193 2.21, that was more larger or smaller than normal angle 183 of tibiofemorial. The measure Q-Angle(patellofemorial) indicates the group of the genu varum 9 1.5, the genu valgum 19 2.3, that was larger or smaller than normal angle 13. 2. It showed that range of motion hip joint adduction in the group of the genu varum was more larger than normal range of motion hip joint abduction in the group of the genu valgum was more larger than normal range of motion, hip joint internal rotation in the group of the genu valgum was more larger than normal range of motion, hip joint external rotation in the group of the genu varum was more larger than normal range of motion. 3. range of motion knee joint flexion was simillar to two groups of the genu varum and the genu valgum. On tibial tortion of the leg, the group of the genu varum indicated medial tibial tortion, and the genu valgum indicated lateral tibial tortion. 4. Each groups of the genu varum and the genu valgum in plantarflexion and dorsiflexion of ankle joint. With peak angle, the group of the genu varum showed toe-in that was more smaller than normal angle, and the group of the genu valgum showed toe-out that was more larger than normal angle.

• Geomechanics and Engineering
• /
• 제20권6호
• /
• pp.547-556
• /
• 2020

An understanding of the influence of MR (Magmatic Rock) thickness on the surrounding rock behaviors is essential for the prevention and management of dynamic disasters in coal mining. In this study, we used FLC3D to study the breaking and instability laws of surrounding rock with different MR thicknesses in terms of strata movement, stress and energy. The mechanism of dynamic disasters was revealed. The results show that the thicker the MR is, (1) the smaller the subsidence of the overlying strata is, but the subsidence span of the overlying strata become wider, and the corresponding displacement deformation value of the basin edge become smaller. (2) the slower the growth rate of abutment pressure in front of the working face is, but the peak value is smaller, and the influence range is larger. The peak value decreases rapidly after the breaking, and the stress concentration coefficient is maintained at about 1.31. (3) the slower the peak energy in front of coal wall, but the range of energy concentration increases (isoline "O" type energy circle). Finally, a case study was conducted to verify the disaster-causing mechanism. We anticipate that the research findings presented herein can assist in the control of dynamic hazards.

• Structural Engineering and Mechanics
• /
• 제74권1호
• /
• pp.19-32
• /
• 2020

Metallic energy-dissipation dampers are widely used in structures. They are comprised of an added damping and stiffness (ADAS) device with many parallel, diamond-shaped hole plates, the neck width of which is an important parameter. However, no studies have analyzed the neck width's influence on the ADAS device's performance. This study aims to better understand that influence by conducting a pseudo-static test on ADAS, with three different neck widths, and performing finite element analysis (FEA) models. Based on the FEA results and mechanical theory, a design neck width range was proposed. The results showed that when the neck width was within the specified range, the diamond-shaped hole plate achieved an ideal yield state with minimal stress concentration, where the ADAS had an optimal energy dissipation performance and the brittle shear fracture on the neck was avoided. The theoretical values of the ADAS yield loads were in good agreement with the test values. While the theoretical value of the elastic stiffness was lower than the test value, the discrepancy could be reduced with the proposed modified coefficient.

• 대한건축학회논문집:계획계
• /
• 제34권8호
• /
• pp.43-50
• /
• 2018

The purpose of this study is to analyze the effect of architectural attributes on operating revenue by concentrating on the facility side and to investigate how much individual architectural factors can affect operating revenue. The time range of this study is limited to 2015, and the spatial range is limited to a tourist hotel in Seoul that can be easily surveyed and verified. The analysis method is to confirm the significance and influence of each attribute through regression analysis. According to the results, The room part such as number of rooms or area showed a relatively low correlation with "revenue per available room (Rev.PAR)" than "average daily rate (ADR)", but showed a high correlation with non - architectural attributes such as auxiliary facilities and chain. This shows that factors that influence the operating profit of hotel are not the part of the room but the other factors such as the auxiliary facilities work more. In addition, the presence of spa and the number of auxiliary facilities in the hotel have a positive effect on the operating profit of the hotel due to the non - architectural attributes. This is expected to provide a new direction for future research in studying hotel facilities.