• Ocean and Polar Research
• /
• v.34 no.3
• /
• pp.325-335
• /
• 2012

It is well known that sound waves in the sea propagates under the influence of sea surface and bottom roughness, the sound speed profile, the water depth, and the density of sea floor sediment. In particular, an abrupt change of sound speed with depth can greatly affect sound propagation through an eddy. Eddies are frequently generated in the East Sea near the Korean Peninsula. A warm eddy with diameter of about 150 km is often observed, and the sound speed profile is greatly changed within about 400 m of water depth at the center by the eddy around the Ulleung Basin in the East Sea. The characteristics of low-frequency sound propagation across a warm eddy are investigated by a sound propagation model in order to understand the influence of warm eddies. The acoustic rays and propagation losses are calculated by a range-dependent acoustic model in conditions where the eddy is both present and absent. We found that low-frequency sound propagation is affected by the warm eddy, and that the phenomena dominate the upper ocean within 800 m of water depth. The propagation losses of a 100 Hz frequency are variable within ${\pm}15$ dB with depth and range by the warm eddy. Such variations are more pronounced at the deep source near the sound channel axis than the shallow source. Furthermore, low-frequency sound propagation from the eddy center to the eddy edge is more affected by the warm eddy than sound propagation from the eddy edge to the eddy center.

• Geomechanics and Engineering
• /
• v.10 no.3
• /
• pp.285-296
• /
• 2016

The investigation of stress wave propagation in a medium with initial stress has very important application in the field of engineering. However, the previous research less consider the influence of initial stress gradient on wave propagation. In the present paper, the governing equation of wave propagation in elastic continuum material with inhomogeneous initial stress is derived, which indicated that the inhomogeneous initial stress changed the governing equation of wave propagation. Additionally, the definite problem of wave propagation in material with initial stress gradient is verified by using mathematical physics method. Based on the definite problem, the elastic displacement-time relationship of wave propagation is explored, which indicated that the inhomogeneous initial stress changed waveform and relationship of displacement-time histories. Furthermore, the spall process of blasting wave propagation from underground to earth surface is simulated by using LS-DYNA.

• Geomechanics and Engineering
• /
• v.8 no.3
• /
• pp.377-390
• /
• 2015

The governing equations of wave propagation in one dimension of elastic continuum materials are investigated by taking the influence of the initial stress into account. After a short review of the theory of elastic wave propagation in a rock mass with an initial stress, results indicate that the initial stress differentially influences P-wave and S-wave propagation. For example, when the initial stress is homogeneous, for the P-wave, the initial stress only affects the magnitude of the elastic coefficients, but for the S-wave, the initial stress not only influences the elastic coefficients but also changes the governing equation of wave propagation. In addition, the P-wave and S-wave velocities were measured for granite samples at a low initial stress state; the results indicate that the seismic velocities increase with the initial stress. The analysis of the previous data of seismic velocities and elastic coefficients in rocks under ultra-high hydrostatic initial stress are also investigated.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.451-454
• /
• 2008

Potential tsunamis which may occur near Ryukyu Islands were simulated. Propagation characteristics of the potential tsunamis over the southwestern sea and the influence of tsunamis on the southwestern coast of Korean Peninsula were analyzed. The shallow water area in the east sea of China and the deep water Okinawa Trough play an important role in wave transformation and propagation of the potential tsunamis. The propagation characteristics of the potential tsunamis generated near Ryukyu Islands can be described as in followings : In the first stage after generation, the tsunamis propagate with high speed both northeastward and southwestward along the Okinawa Trough. As a result the waves are elongated and the tsunami height is significantly reduced. The elongated crest of tsunamis spans the whole distance of the Okinawa Trough and lines up toward the edge of the continental shelf of East China Sea. Then, the tsunamis are propagating towards the southeast coast of China. Thus, the influence of tsunamis on the Korean coasts becomes weak.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.1
• /
• pp.87-96
• /
• 2013

Influence propagation is an important research issue in social networks. Influence propagation means that the status or the disposition of nodes get changed by new idea, information and gossip propagated by other nodes. Influenced nodes also make other nodes influenced across the network. The influence propagation problem based on 'word of mouth' referral is to find most influential nodes set in networks to maximize influence. In this paper, we study the influence measuring and finding most influential nodes set in Delay-Tolerant Networks. It is difficult to measure exact influential power in Delay-Tolerant networks where network topology is not stable due to the nodal mobility. In this paper, we propose a distributed scheme that each node constructs $k$-clique community structure and estimates local influential power in Delay-Tolerant Networks. Simulation results show that the influential nodes information estimated by proposed scheme is in agreement with a global view of influential nodes information.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.4
• /
• pp.412-419
• /
• 2016

The firing noise produced at artillery test range or military training ground is impulsive burst noise which energy is generated within tens of milliseconds and distributed an isolated burst of sound energy separated to one by one noise. The long range propagation of this noise is affected by a caliber of gun, amount of propellant, distance between source and receiver, ground and meteorological condition. In this paper, main influence parameters have been described based on experimental analysis of measured data. It is considered that this analysis result can be used as useful materials for study of effective firing noise management and development of propagation model.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.130-134
• /
• 2016

The influence of Au/Ni-based contact formed on a lightly-doped (7.3×1017cm−3, Zn-doped) InGaAsP layer for electrical compensation of surface plasmon polariton (SPP) propagation under various rapid thermal annealing (RTA) conditions has been studied. The active control of SPP propagation is realized by electrically pumping the InGaAsP multiple quantum wells (MQWs) beneath the metal planar waveguide. The metal planar film acts as the electric contact layer and SPP waveguide, simultaneously. The RTA process can lower the metal-semiconductor electric contact resistance. Nevertheless, it inevitably increases the contact interface morphological roughness, which is detrimental to SPP propagation. Based on this dilemma, in this work we focus on studying the influence of RTA conditions on electrical control of SPPs. The experimental results indicate that there is obvious degradation of electrical pumping compensation for SPP propagation loss in the devices annealed at 400℃ compared to those with no annealing treatment. With increasing annealing duration time, more significant degradation of the active performance is observed even under sufficient current injection. When the annealing temperature is set at 400℃ and the duration time approaches 60s, the SPP propagation is nearly no longer supported as the waveguide surface morphology is severely changed. It seems that eutectic mixture stemming from the RTA process significantly increases the metal film roughness and interferes with the SPP signal propagation.

• Journal of electromagnetic engineering and science
• /
• v.17 no.3
• /
• pp.165-167
• /
• 2017

We predict the electromagnetic wave propagation in space environments using geometrical optics. The effective indices of the troposphere, stratosphere, and ionosphere are computed, and the reflection, refraction, and attenuation of electromagnetic waves in space environments are calculated based on the ray tracing technique and geometrical optics. The influence of the refractive index and loss of atmosphere and the incident angle of the antenna on electromagnetic wave propagation is discussed.

• Journal of the Optical Society of Korea
• /
• v.20 no.5
• /
• pp.541-546
• /
• 2016

In this paper, by using the Rayleigh-Sommer field theory and the cross-spectral density function, the analytical expression for the intensity distribution of a double half-Gaussian hollow beam in a turbulent atmosphere is obtained. The influence of the initial spot size of this beam on its propagation properties in a turbulent atmosphere is simulated, and the intensity distributions for such beams with different spot sizes are obtained. The results show that the initial spot size has an important influence on the propagation properties in the near field, while this influence in the far field is very weak.

• Journal of Information Processing Systems
• /
• v.16 no.3
• /
• pp.699-717
• /
• 2020

Propagation time on permissionless blockchain plays a significant role in terms of stability and performance in the decentralized systems. A large number of activities are disseminated to the whole nodes in the decentralized peer-to-peer network, thus causing propagation delay. The stability of the system is our concern in the first place. The propagation delay opens up opportunities for attackers to apply their protocol. Either by accelerating or decelerating the propagation time directly without proper calculation, it brings numerous negative impacts to the entire blockchain system. In this paper, we thoroughly review and elaborate on several parameters related to the propagation time in such a system. We describe our findings in terms of data communication, transaction propagation, and the possibility of an interference attack that caused an extra propagation time. Furthermore, we present the influence of block size, consensus, and blockchain scalability, including the relation of parameters. In the last session, we remark several points associated with the propagation time and use cases to avoid dilemmas in the light of the experiments and literary works.