• 제목/요약/키워드: Infill area

검색결과 24건 처리시간 0.021초

그래핀과 유공유리분말을 사용한 초고강도 콘크리트의 자기수축에 관한 실험적 연구 (A Comprehensive Examination of Autogenous Shrinkage in Ultra-High-Strength Concrete augmented with Graphene and Hollow Glass Powder)

  • 서태석;이현승;김강민
    • 한국건축시공학회지
    • /
    • 제23권5호
    • /
    • pp.547-558
    • /
    • 2023
  • 초고강도 콘크리트의 강도와 유동성 확보를 위해 실리카흄(SF)를 사용하는 전통적인 방식에서 벗어나 산화 그래핀 나노플레이트릿(Oxidized graphene nanoplatelet, GO)와 유공유리분말( Hollow glass powder, HGP)를 사용한 초고강도 콘크리트를 개발하였고 본 연구에서는 자기수축 특성에 대해 검토하였다. 그 결과 SF를 사용한 Ref 배합보다 SF를 사용하지 않고 cGO(C사의 GO)와 HGP를 사용한 NewMix 배합의 자기수축이 13% 정도 감소하였다. NewMix의 자기수축에 의한 균열발생은 Ref 보다 1일 정도 지연되었고 균열발생 시의 인장응력은 가장 높았다. cGO의 높은 비표면적과 우수한 분산성으로 콘크리트 내의 공극들이 충전 되어 자기수축이 감소하고 cGO에 의한 균열저항 성능이 증가하여 초고강도 콘크리트의 자기수축 균열 제어에 효과가 있을 것으로 판단된다.

신기 지구조운동의 해석을 위한 한반도 근해 천부지질의 고해상 탄성파 탐사: 울진 주변해역 (High-resolution Seismic Imaging of Shallow Geology Offshore of the Korean Peninsula: Offshore Uljin)

  • 김한준;주형태;유해수;김광희;유이선
    • 지구물리와물리탐사
    • /
    • 제14권2호
    • /
    • pp.127-132
    • /
    • 2011
  • 천부지질과 기반암의 변형을 파악하기 위해 $37^{\circ}N$을 중심으로 동해의 후포분지 연안에서 약 650 km의 고해상 탄성파 자료를 획득하여 천부와 기반암의 변형을 조사하였다. 탄성파 단면은 조사지역내에서 주된 퇴적중심이 오른쪽과 왼쪽에 각각 후포단층과 이에 대조되는(antithetic) 단층에 의해 경계지어졌음을 보여준다. 하지만, 후포단층은 변위가 매우 큰 반면 대조단층은 후포단층에 비해 수직변위 뿐만 아니라 수평범위에서도 훨씬 작다. 후포분지의 충진퇴적물은 리프트와 동시(올리고세 후기.마이오세 초기), 리프트 후기(마이오세 중기.홀로세) 퇴적단위로 구성되어 있다. 후포단층과 그 외의 단층들은 주로 북쪽방향성분을 가지며 정단층변위를 보여 준다. 동해가 마이오세 중기이후 압축력의 지배를 받고 있음을 고려하면, 이들 단층이 올리고세 후기에서 마이오세 전기 동안 진행된 대륙지각의 리프팅 동안 형성되었다고 해석된다. 현재 아무리아판의 움직임과 관련하여 한반도와 그 주변에서 관측되는 ENE방향의 최대 주압축력 때문에 후포분지내 단층들이 재동될 경우 역단층 및 우수주향의 주향이동운동을 한다고 해석한다. 후포단층에서 발생한 최근의 지진은 연구지역 및 그 외의 한반도 대륙주변부에서 지진이 제3기에 진행된 대륙지각의 리프팅을 유도한 단층에서 발생하고 있음을 지시한다.

Hysteretic characteristics of steel plate shear walls: Effects of openings

  • Ali, Mustafa M.;Osman, S.A.;Yatim, M.Y.M.;A.W., Al Zand
    • Structural Engineering and Mechanics
    • /
    • 제76권6호
    • /
    • pp.687-708
    • /
    • 2020
  • Openings in steel plate shear walls (SPSWs) are usually used for decorative designs, crossing locations of multiple utilities and/or structural objectives. However, earlier studies showed that generating an opening in an SPSW has a negative effect on the cyclic performance of the SPSW. Therefore, this study proposes tripling or doubling the steel-sheet-plate (SSP) layer and stiffening the opening of the SPSW to provide a solution to undesirable opening effects, improve the SPSW performance and provide the infill option of potential strengthening measures after the construction stage. The study aims to investigate the impact of SSP doubling with a stiffened opening on the cyclic behaviour, expand the essential data required by structural designers and quantify the SPSW performance factors. Validated numerical models were adopted to identify the influence of the chosen parameters on the cyclic capacity, energy dissipation, ductility, seismic performance factors (SPF) and stiffness of the suggested method. A finite Element (FE) analysis was performed via Abaqus/CAE software on half-scale single-story models of SPSWs exposed to cyclic loading. The key parameters included the number of SSP layers, the opening size ratios corresponding to the net width of the SSP, and the opening shape. The findings showed that the proposed assembly method found a negligible influence in the shear capacity with opening sizes of 10, 15, 20%. However, a deterioration in the wall strength was observed for openings with sizes of 25% and 30%. The circular opening is preferable compared with the square opening. Moreover, for all the models, the average value of the obtained ductility did not show substantial changes and the ultimate shear resistance was achieved after reaching a drift ratio of 4.36%. Additionally, the equivalent sectional area of the SSP in the twin and triple configuration of the SPSWs demonstrated approximately similar results. Compared with the single SSP layer, the proposed configuration of the twin SSP layer with a stiffened opening suggest to more sufficiency create SSP openings in the SPSW compared to that of other configurations. Finally, a tabular SPF quantification is exhibited for SPSWs with openings.

동해 울릉분지 남서주변부의 탄화수소 트랩 분석 (Analysis of Hydrocarbon Trap in the Southwestern Margin of the Ulleung Basin, East Sea)

  • 이민우;강무희;윤영호;이보연;김경오;김진호;박명호;이금석
    • 자원환경지질
    • /
    • 제48권4호
    • /
    • pp.301-312
    • /
    • 2015
  • 동해 울릉분지 남서주변부는 탄화수소의 부존 가능성이 높은 대륙붕 환경으로 1990년대 말에 상업적 생산이 가능한 가스전이 발견된 바 있다. 가스전과 인접한 연구지역에서도 추가적인 가스개발을 위해 침식수로 내부의 조립질 퇴적체를 대상으로 시추가 수행되었지만 경제성이 부족한 것으로 판명되었다. 본 연구에서는 새로 취득된 탄성파 및 기존 시추 자료를 이용하여 울릉분지 남서주변부에 분포하는 침식수로 하부에 탄화수소 트랩 가능성이 있는 지질구조를 탐지하였다. 취득된 심부 탄성파 자료 및 시추자료 해석에 의하면 연구지역에 분포하는 퇴적층은 구조진화와 연계하여 열개동시성 퇴적층군(MS1), 후열개 퇴적층군(MS2), 횡압력 동시성 퇴적층군(MS3), 후횡압력 퇴적층군(MS4)으로 구분된다. 중기 마이오세 이전에 분지형성과 동시에 퇴적된 MS1은 주로 중-저진폭, 저주파수의 캐오틱 음향특성을 나타낸다. 중기 마이오세 동안 분지가 확장되며 다량의 퇴적물이 유입된 MS2는 중-저진폭의 음향특성과 함께 연속성이 양호하며 전진퇴적 양상을 나타낸다. MS3은 고진폭 및 중-고주파수의 연속성이 양호한 반사면을 나타내는데 이는 조립질 퇴적층으로 해석된다. 조립질 퇴적물이 우세한 MS3는 침식수로에 의해 광역적으로 삭박되었으며 침식수로 내부에는 MS4의 세립질 퇴적물이 충전되어 층서트랩을 형성한다. 따라서 연구지역의 트랩 구조는 MS3의 조립질 퇴적층이 저류층을 형성하며 MS4의 세립질 퇴적물로 충전된 침식수로가 덮개암으로 작용하는 층서 트랩으로 트랩 구조 내부에서는 탄화수소 부존을 지시하는 flat-spot 탄성파 이상대가 발달한다.