• Korean Chemical Engineering Research
• /
• v.62 no.2
• /
• pp.147-152
• /
• 2024

Most medical sensors are disposable products. In order to reduce inspection and diagnosis costs, it is more important to develop the inexpensive electrode materials. We fabricated the CuO NPs/PANI/E-PGE as an electrode material for disposable electrochemical sensors and applied it to a non-enzymatic glucose sensor. For surface activation of PGE, pretreatment was performed using chemical and electrochemical methods, respectively. Electrochemical properties according to the pretreatment method were analyzed through chronoamperometry (CA), cyclic voltammetry (CV) and electrochemical impedance (EIS). From these analytical results, the electrochemically pretreated PGE (E-PGE) was finally adopted. The non-enzymatic glucose sensor based on CuO NPs/PANI/E-PGE shows sensitivity of 239.18 mA/mM×cm² (in a linear range of 0.282~2.112 mM) and 36.99 mA/mM×cm² (3.75423~50 mM), detection limit of 17.6 μM and good selectivity. Based on the results of this study, it was confirmed that the modified PGE is a high-performance electrode material. Therefore, these electrodes can be applied to a variety of disposable sensors.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.90-96
• /
• 2024

In this paper, we propose an automated system. It utilizes a Raspberry Pi camera and a function generator to analyze luminance in an image. Then, it applies voltage based on this analysis to control light transmission through coloring smart windows. The existing luminance meters used to measure luminance are expensive and require unnecessary movement from the user, making them difficult to use in real life. However, after taking a photography, luminance analysis in the image using the Python Open Source Computer Vision Library (OpenCV) is inexpensive and portable, so it can be easily applied in real life. This system was used in an environment where smart windows were applied to detect the luminance of windows. Based on the brightness of the image, the coloring of the smart window is adjusted to reduce the brightness of the window, allowing occupants to create a comfortable viewing environment.

• Journal of Intelligence and Information Systems
• /
• v.22 no.1
• /
• pp.159-185
• /
• 2016

Planning a multi-day trip is a complex, yet time-consuming task. It usually starts with selecting a list of points of interest (POIs) worth visiting and then arranging them into an itinerary, taking into consideration various constraints and preferences. When choosing POIs to visit, one might ask friends to suggest them, search for information on the Web, or seek advice from travel agents; however, those options have their limitations. First, the knowledge of friends is limited to the places they have visited. Second, the tourism information on the internet may be vast, but at the same time, might cause one to invest a lot of time reading and filtering the information. Lastly, travel agents might be biased towards providers of certain travel products when suggesting itineraries. In recent years, many researchers have tried to deal with the huge amount of tourism information available on the internet. They explored the wisdom of the crowd through overwhelming images shared by people on social media sites. Furthermore, trip planning problems are usually formulated as 'Tourist Trip Design Problems', and are solved using various search algorithms with heuristics. Various recommendation systems with various techniques have been set up to cope with the overwhelming tourism information available on the internet. Prediction models of recommendation systems are typically built using a large dataset. However, sometimes such a dataset is not always available. For other models, especially those that require input from people, human computation has emerged as a powerful and inexpensive approach. This study proposes CYTRIP (Crowdsource Your TRIP), a multi-day trip itinerary planning system that draws on the collective intelligence of contributors in recommending POIs. In order to enable the crowd to collaboratively recommend POIs to users, CYTRIP provides a shared workspace. In the shared workspace, the crowd can recommend as many POIs to as many requesters as they can, and they can also vote on the POIs recommended by other people when they find them interesting. In CYTRIP, anyone can make a contribution by recommending POIs to requesters based on requesters' specified preferences. CYTRIP takes input on the recommended POIs to build a multi-day trip itinerary taking into account the user's preferences, the various time constraints, and the locations. The input then becomes a multi-day trip planning problem that is formulated in Planning Domain Definition Language 3 (PDDL3). A sequence of actions formulated in a domain file is used to achieve the goals in the planning problem, which are the recommended POIs to be visited. The multi-day trip planning problem is a highly constrained problem. Sometimes, it is not feasible to visit all the recommended POIs with the limited resources available, such as the time the user can spend. In order to cope with an unachievable goal that can result in no solution for the other goals, CYTRIP selects a set of feasible POIs prior to the planning process. The planning problem is created for the selected POIs and fed into the planner. The solution returned by the planner is then parsed into a multi-day trip itinerary and displayed to the user on a map. The proposed system is implemented as a web-based application built using PHP on a CodeIgniter Web Framework. In order to evaluate the proposed system, an online experiment was conducted. From the online experiment, results show that with the help of the contributors, CYTRIP can plan and generate a multi-day trip itinerary that is tailored to the users' preferences and bound by their constraints, such as location or time constraints. The contributors also find that CYTRIP is a useful tool for collecting POIs from the crowd and planning a multi-day trip.

• Korean Business Review
• /
• v.17
• /
• pp.53-81
• /
• 2004

The purpose of this study is to understand the realities and the subject of environmental management for small and medium-sized companies in Gwangwon area, through surveying the present status as to acquiring the certification of ISO14001, and to seek for a plan to facilitate environmental management. Given summarizing key results, those are as follows. First, while the number of companies in our country which acquired the certification of ISO14001, amounts to 1,215 businesses as of April of 2003, the number of small and medium-sized companies in Gwangwon area which obtained the certification of ISO14001 reached only 26 businesses, the lowest level among metropolitan municipalities. Second, for the reason that companies who didn't acquire the certification, strive not to receive the certification, it did present the point that' costs to be needed in acquiring and maintaining the certification are larger than practical benefit. Third, the biggest reason for either companies which did not acquire the certification of ISO14001 or companies which did (try to) acquire the certification of ISO1400, was, enhancement of a corporate image,' and the effect after a company who obtained the certification introduced the environmental management system, was also shown to be 'the improvement of a corporate image.' Fourth, many companies who acquired the certification of ISO1400 pointed out the response related to 'burden on document creation and costs' and 'lack of manpower' as problems when introducing the environmental management system. On the basis of major results of a study as the above, given presenting the subject and a plan for activating the environmental management of small and medium-sized companies in Gwangwon area, those are as follows. First, because most of companies who did not obtain the certification of ISO1400 have low recognition of ISO14001, it needs continuous and positive publicity, education and a training system. Second, it requires to carry out an educational program to nurture professional manpower due to lack of manpower relevant to environmental management, to expand payment of subsidies, to open exclusive-charge department and consulting contact, to have the relevant information be database and to develop software. Third, in order to make the certification obtained through inexpensive costs and simple procedures, it needs to positively consider the creation of public approval system for a small and medium-sized company, group approval system, industrial-complex approval system, and others.

• Journal of Korean Academy of Nursing
• /
• v.1 no.1
• /
• pp.27-43
• /
• 1970

This study is designed to find out proper nursing activities for the needs of the colostomy patients, i.e., mental and psychological as well as physical needs for rapid recovery, and to help them build up the follow-up care for proper social adjustment. The study is based on 268 cases out of 381 colostomy patient's records kept in Ewha Womans University Hospital, Yonsei Medical Center, and National Medical Center in between the period from Jan. 1953 to Jan. 1970. The items of study are mainly on etiology, sex, age, duration of hospitalization, mortality rate, seasonal frequency, time from the onset of illness to the admission of the hospital, signs and symptoms. 1. Frequency of onset by etiology: Neoplastic disease 112 cases (42%), Inflammatory disease 33 cases (12%), Congenital malformation 30 cases (11%), Intussusception 25 cases (9.3%), Trauma 24 cases (9%), Volvulus 17 cases (6.3%), and Crohn's disease 6 cases (2.2%). 2. By sex: male 167 cases (62.9%), and female 101 cases (37.1%). So the ratio of portion of male and female 2:1. 3. By age: under 1·year·old 27 cases (10.1%) highest, 41-50 yrs 54 cases (20.2%), 51-60 yrs 42 cases (15.5%), above 71 yrs 5 cases (1.9%). 4. Duration of hospitalization: the shortest is 2-days and the longest is 470 days. 1-20-days 52%, 40-60 days 14%. 5. Mortality rate: Under the 10-days-admission 19.5%, and the beyond 30-days-admission 3.9%. 6. Seasonal frequency: Higher in summer (32% ). 7. Signs and symptoms: abdominal pain (56%), abdominal distention (54%), vomiting (40%), bloody mucoid diarrhea (38%) , pain of anal region (18%), abdominal tenderness, anorexia, indigestion, constipation, disuria, tenesmus, high fever and chilling sensation, bile tingled vomiting. Nursing activities for the patient's physical needs are as follows: Skin care for colostomy region, Prevention of colostomy constriction and depression, Removal of an offensive odor, The use of colostomy bag-selection for, and demonstration of the use of inexpensive colostomy irrigation equipment, Personal hygiene, general skin care, care of hair, finger nails and toe-nails, Oral hygiene, sleep and rest, aquate, Daily activities, etc. Measures for regulation of bowl movement. Keeping the instruction of taking food, Preparing the meal and help for anorexia, Constipation and it's solution, Prevention of diarrhea, helping the removal of mucous, and stretch constricted steam as needed. Nursing activities for pt's socio-psychological needs are as follows; Help the patient to make decision for the operation, Remove pt's anxiety toward operation and anesthesia, To meet the pt's spiritual needs at his death bed, Help to establish family and friends cooperation, Help to reduce anxiety at the time of admission and it's solution, Help to meet religious need, Help to remove pt's anxiety for loosing his job and family maintenance, Follow-up studies for 7 cases have been done to implement the present thesis. The items of the personal interviews with the patients are as follows: Acceptability for artificial anus, The most anxious thing they had in mind at the time of discharge, The most anxious thing they hat·e in mind at present, Their friends and family's attitudes toward the patient after operation, Relations with other colostomy patients, Emotional damage from the operation, Physical problem of enema, irrigation, Control of diet, Skin care, Control of offensive odor, Patient's suggestions to nurses during hospital stay and after discharge. In conclusion, the follow-up care for colostomy patients shares equal weight or perhaps more than the post-operative care. The follow-up care should include the spiritual care for moral support of the patient, to drag him out of isolation and estrangement, and make him fully participate in social activities. It is suggested that the following measures would help to rehabilitate the colostomy patients (1) mutual acquaintance with other colostomy patients if possible form a sort of club for the colostomy patient to exchange their experiences in care (2) through the team work of doctor, nurse and rehabilitation specialists, to have a sort of concerted effort for betterment of the patient.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.169-179
• /
• 2000

The purpose of this study is to develop the system which convert the optical difference of teeth texture between intact enamel and incipient caries lesion into shade difference by laser fluorescence and to develop new and simple caries activity test using laser fluorescence. The experimental design of this study consists of three parts. In first part, a new method for the in vitro assessment of changes in initial enamel caries lesion of Bovine teeth using laser fluorescence is tested. In second part, in vivo assessment undertaken. Number of teeth which showed incipient carious lesion on buccal surface examined by laser fluorescence was compared with the caries activity test of $Cariescreen^{(R)}$ test and other oral environmental test of dDfFtT. In third part, new caries activity test measured by laser fluorescence was developed on the basis of above results and evaluated the sensitivity, specificity, and diagnostic power. Optical density measured by laser fluorescence was increased as increasing the depth of incipient carious lesion and showed high correlation$(\gamma=0.7015)$ with lesion depth. Optical density showed direct proportion to lesion depth. Linear equation was obtained between the optical density and the lesion depth by regression analysis. The result of caries activity test with laser fluorescence showed high correlation with those of $Cariescreen^{(R)}$ test and dDfFtT examination. Caries activity test with laser fluorescence showed 48% of sensitivity, 52% of specificity, and 45% of diagnostic power on the basis of dDfFtT examination, and also showed 48% of sensitivity, 51% of specificity, and 36% of diagnostic power on the basis of $Cariescreen^{(R)}$ test. In regard above result, caries activity test with laser fluorescence considered to be reliable for caries activity test compared with other oral environmental test. and it was also considered to be practical because it would be simple, inexpensive, and time saving method.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.3
• /
• pp.181-186
• /
• 1994

Vegetative node and rhizome of Ligusticum chuanxiong Hort. were planted in spring and autumn and harvested after one and two years to determine the appropriate harvesting time which produced a high yield. Plant height, leaf number and branch number per plant were increased in order of rhizome planted in spring and harvested after two year(RST), rhizome planted in autumn and harvested after one year(RAO), vegetative node planted in autumn and harvested after one year(VNAO), and vegetative node planted in spring and harvested after one year(VNSO). Leaf area index and dry leaf weight in VNSO were highest on August 16, but dry weights of stem and rhizome was increased until harvesting time. The appropriate harvesting time was October 17, in RST, November 9 in RAO and VNAO, and November 13 in VNSO. Yield in autumn planting was more increased than that in spring planting and also that in RST was 443kg per 10a and increased by 2.8 times compared to RAO. However the yield in the rhizome planting was more increased by 17 percent than the vegetative node planting, the latter planting was inexpensive and economic for purchasing seed materials.

• The Korean Journal of Mycology
• /
• v.30 no.1
• /
• pp.50-55
• /
• 2002

Biological control against mushroom fly, Lycoriella mali, was performed by using Bacillus thuringiensis subsp. israelensis Bti-D and Bti-U, isolated from dead mushroom fly in oyster mushroom houses. Control values of the bacterial strains Bti-D and Bti-U against L. mali in bottle culture of oyster mushroom were 74.4% and 64.2%, respectively, and the value in small tray culture were 75.8% and 56.8%, respectively. In the experiment to develop the mass, cheap media for Bti-D and Bti-U isolates, the Biji broth (bean curd residue, called Biji in Korean language) was selected as a culture medium for an inexpensive and mass cultivation by the measurement of optical density of the two bacteria grown in the different media tested. Insecticidal effect of the formulation contained different ingredients that were prepared by using the Bti-D strain cultured in the Biji broth was tested in tray and bottle culture of oyster mushroom. The WCS formulation that contained corn starch as bio-gel (86.4%) was more effective to control the mushroom fly than living cells (69.1%) in bottle culture of oyster mushroom. Moreover, insecticidal effect of the WCS formulation was improved when water of pH 8 was used for dilution of the formulation. Effect of the WCS formulation using water of pH 8 and chemicals, Zuron (dimillin) W.P. on the control of mushroom fly and the productivity of oyster mushroom was investigated in tray culture of oyster mushroom. The Zuron W.P. was more effective to control the mushroom fly than the WCS formulation. However, compared with no treatment, the productivity of the mushroom treated with the WCS formulation was improved than that of the mushroom with Zuron W.P.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.34-45
• /
• 2016

Global warming and climate change have been caused by combustion of fossil fuels. The greenhouse gases contributed to the rise of temperature between $0.6^{\circ}C$ and $0.9^{\circ}C$ over the past century. Presently, fossil fuels account for about 88% of the commercial energy sources used. In developing countries, fossil fuels are a very attractive energy source because they are available and relatively inexpensive. The environmental problems with fossil fuels have been aggravating stress from already existing factors including acid deposition, urban air pollution, and climate change. In order to control greenhouse gas emissions, particularly CO2, fossil fuels must be replaced by eco-friendly fuels such as biomass. The use of renewable energy sources is becoming increasingly necessary. The biomass resources are the most common form of renewable energy. The conversion of biomass into energy can be achieved in a number of ways. The most common form of converted biomass is pellet fuels as biofuels made from compressed organic matter or biomass. Pellets from lignocellulosic biomass has compared to conventional fuels with a relatively low bulk and energy density and a low degree of homogeneity. Thermal pretreatment technology like torrefaction is applied to improve fuel efficiency of lignocellulosic biomass, i.e., less moisture and oxygen in the product, preferrable grinding properties, storage properties, etc.. During torrefacton, lignocelluosic biomass such as palm kernell shell (PKS) and empty fruit bunch (EFB) was roasted under an oxygen-depleted enviroment at temperature between 200 and $300^{\circ}C$. Low degree of thermal treatment led to the removal of moisture and low molecular volatile matters with low O/C and H/C elemental ratios. The mechanical characteristics of torrefied biomass have also been altered to a brittle and partly hydrophobic materials. Unfortunately, it was much harder to form pellets from torrefied PKS and EFB due to thermal degradation of lignin as a natural binder during torrefaction compared to non-torrefied ones. For easy pelletization of biomass with torrefaction, pellets from PKS and EFB were manufactured before torrefaction, and thereafter they were torrefied at different temperature. Even after torrefaction of pellets from PKS and EFB, their appearance was well preserved with better fuel efficiency than non-torrefied ones. The physical properties of the torrefied pellets largely depended on the torrefaction condition such as reaction time and reaction temperature. Temperature over $250^{\circ}C$ during torrefaction gave a significant impact on the fuel properties of the pellets. In particular, torrefied EFB pellets displayed much faster development of the fuel properties than did torrefied PKS pellets. During torrefaction, extensive carbonization with the increase of fixed carbons, the behavior of thermal degradation of torrefied biomass became significantly different according to the increase of torrefaction temperature. In conclusion, pelletization of PKS and EFB before torrefaction made it much easier to proceed with torrefaction of pellets from PKS and EFB, leading to excellent eco-friendly fuels.

• 한국유가공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.59-60
• /
• 2002

Edible films such as wax coatings, sugar and chocolate covers, and sausage casings, have been used in food applications for years$^{(1)}$ However, interest in edible films and biodegradable polymers has been renewed due to concerns about the environment, a need to reduce the quantity of disposable packaging, and demand by the consumer for higher quality food products. Edible films can function as secondary packaging materials to enhance food quality and reduce the amount of traditional packaging needed. For example, edible films can serve to enhance food quality by acting as moisture and gas barriers, thus, providing protection to a food product after the primary packaging is opened. Edible films are not meant to replace synthetic packaging materials; instead, they provide the potential as food packagings where traditional synthetic or biodegradable plastics cannot function. For instance, edible films can be used as convenient soluble pouches containing single-servings for products such as instant noodles and soup/seasoning combination. In the food industry, they can be used as ingredient delivery systems for delivering pre-measured ingredients during processing. Edible films also can provide the food processors with a variety of new opportunities for product development and processing. Depends on materials of edible films, they also can be sources of nutritional supplements. Especially, whey proteins have excellent amino acid balance while some edible films resources lack adequate amount of certain amino acids, for example, soy protein is low in methionine and wheat flour is low in lysine$^{(2)}$. Whey proteins have a surplus of the essential amino acid lysine, threonine, methionine and isoleucine. Thus, the idea of using whey protein-based films to individually pack cereal products, which often deficient in these amino acids, become very attractive$^{(3)}$. Whey is a by-product of cheese manufacturing and much of annual production is not utilized$^{(4)}$. Development of edible films from whey protein is one of the ways to recover whey from dairy industry waste. Whey proteins as raw materials of film production can be obtained at inexpensive cost. I hypothesize that it is possible to make whey protein-based edible films with improved moisture barrier properties without significantly altering other properties by producing whey protein/lipid emulsion films and these films will be suitable far food applications. The fellowing are the specific otjectives of this research: 1. Develop whey protein/lipid emulsion edible films and determine their microstructures, barrier (moisture and oxygen) and mechanical (tensile strength and elongation) properties. 2. Study the nature of interactions involved in the formation and stability of the films. 3. Investigate thermal properties, heat sealability, and sealing properties of the films. 4. Demonstrate suitability of their application in foods as packaging materials. Methodologies were developed to produce edible films from whey protein isolate (WPI) and concentrate (WPC), and film-forming procedure was optimized. Lipids, butter fat (BF) and candelilla wax (CW), were added into film-forming solutions to produce whey protein/lipid emulsion edible films. Significant reduction in water vapor and oxygen permeabilities of the films could be achieved upon addition of BF and CW. Mechanical properties were also influenced by the lipid type. Microstructures of the films accounted for the differences in their barrier and mechanical properties. Studies with bond-dissociating agents indicated that disulfide and hydrogen bonds, cooperatively, were the primary forces involved in the formation and stability of whey protein/lipid emulsion films. Contribution of hydrophobic interactions was secondary. Thermal properties of the films were studied using differential scanning calorimetry, and the results were used to optimize heat-sealing conditions for the films. Electron spectroscopy for chemical analysis (ESCA) was used to study the nature of the interfacial interaction of sealed films. All films were heat sealable and showed good seal strengths while the plasticizer type influenced optimum heat-sealing temperatures of the films, 130$^{\circ}$C for sorbitol-plasticized WPI films and 110$^{\circ}$C for glycerol-plasticized WPI films. ESCA spectra showed that the main interactions responsible for the heat-sealed joint of whey protein-based edible films were hydrogen bonds and covalent bonds involving C-0-H and N-C components. Finally, solubility in water, moisture contents, moisture sorption isotherms and sensory attributes (using a trained sensory panel) of the films were determined. Solubility was influenced primarily by the plasticizer in the films, and the higher the plasticizer content, the greater was the solubility of the films in water. Moisture contents of the films showed a strong relationship with moisture sorption isotherm properties of the films. Lower moisture content of the films resulted in lower equilibrium moisture contents at all aw levels. Sensory evaluation of the films revealed that no distinctive odor existed in WPI films. All films tested showed slight sweetness and adhesiveness. Films with lipids were scored as being opaque while films without lipids were scored to be clear. Whey protein/lipid emulsion edible films may be suitable for packaging of powder mix and should be suitable for packaging of non-hygroscopic foods$^{(5,6,7,8,)}$.