• 제목/요약/키워드: Inerting gas

검색결과 3건 처리시간 0.02초

불활성가스계 소화약제의 불꽃소화 특성에 관한 연구 (A Study on the Flame Extinguishing Characteristics of Inerting Gaseous Agents)

  • 김성민;신창섭;박재만
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
    • /
    • pp.148-150
    • /
    • 2008
  • 할로겐 화합물 소화약제는 뛰어난 소화능력으로 B급 및 C급 화재에 대한 소화약제로서 가장 널리 사용되었으나 오존층 파괴물질로 규정되어 그 사용이 단계적으로 제한되기 시작하였다. 따라서 이를 대체할 청정소 화약제의 개발이 중요한 필요한 상황이며, 본 연구는 청정소화약제로 사용할 수 있는 불활성가스계 소화약제의 불꽃소화농도와 소염시 화염의 온도변화를 관찰하여 각 소화약제가 가지고 있는 소화특성에 대해 알아보고자 하였다.

  • PDF

중공사형 질소 분리막 모듈의 최적 선정과 유량특성에 관한 연구 (A Study on Flow Rate Properties and Optimal Selection of Nitrogen Membrane Module of Hollow Fiber Type)

  • 김종도;이상수;김전하
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제32권6호
    • /
    • pp.915-922
    • /
    • 2008
  • The gas separation technology using membrane is widely used to refine various gases in many industry fields and recently is being applying in $CO_2$ recovery technology. In the gas and chemical tanker. nitrogen generators for inerting, purging and padding are on board and most of them have membrane modules of hollow fiber type with long life and vibration resisting properties. Because a membrane module is a key component accounting for 50% of total manufacturing cost of nitrogen generator, adequate selection for it is an important problem. In this paper, the flow performance coefficient based on dimension and specification data of membrane module was relatively selected to compare nitrogen generating capacity of module and various performance tests about the selected PARKER ST6010 membrane module were conducted. As a result, the useful coefficient and basic data in selecting a membrane module were achieved.

LP가스 폭발 후 화재 전이 현상 및 전이 방지에 관한 연구 (A Study on the transition of Explosion to Eire of LPG and Its' Prevention)

  • 오규형;이성은
    • 한국화재소방학회논문지
    • /
    • 제18권2호
    • /
    • pp.20-26
    • /
    • 2004
  • 본 논문은 가스폭발로부터 화채로의 전이현상 및 전이 방지 연구를 위해 가로 세로 높이가 각각 $100 cm {\times} 60 cm {\times} 45 cm$인 폭발용기를 사용하여 폭발 후 화재로의 전이현상을 고속 비디오로 가시화하고 가시화된 영상을 분석하여 그 기구들을 확인하였다. 고체 가연물로는 신문용지를 가로 세로가 $30cm {\times} 20cm$크기로 절단하여 사용하였고 LPG-공기 혼합가스는 10㎸ 전기 스파크를 사용하여 점화시켰다. 실험 변수로는 혼합가스의 농도, 개구부의 크기 및 가연물의 위치 등이었으며, 파열면의 크기는 $10cm {\times} 9cm, 13cm {\times} 10cm, 27cm {\times} 20cm, 40cm {\times} 27cm$로 하였고 가연물의 설치 위치는 4종류로 하였다. 폭발 후 전이 방지 기구의 고찰은 가스 소화약제인 이산화탄소를 이용하여 실험하였다. 실험 결과 가스폭발로부터 화재로의 전이 현상은 혼합가스의 농도와 고온의 화염 및 연소가스에 노출되는 시간에 많은 영향을 받으며 폭발 후 분위기의 냉각이나 불활성화를 통해 화재로의 전이를 방지 할 수 있음을 알 수 있었다.