• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.536-544
• /
• 2019

During the assembly and function inspection of missile system, flight simulation process is required. In the conventional flight simulation check of missiles, an inertial navigation system simulator was used to transmit the navigation output data acquired in HILS. There are several disadvantages in terms of check configuration complexity and data synchronization when using the simulator. So we proposed a new flight simulation method that utilizes the nonvolatile built-in memory of the aviation control unit. The data processing procedure and operation procedure of the proposed method for type I and type II missiles are presented. And we analyzed the causes of the difference between proposed method result and the HILS result for type II missile. By comparing the results obtained by the experiments using the proposed method with the results of HILS, the validity of proposed method was confirmed.

• Journal of Sensor Science and Technology
• /
• v.33 no.5
• /
• pp.391-398
• /
• 2024

Accurate positioning is essential for unmanned underwater vehicle (UUV) operations, particularly for long-term survey missions. To reduce the inherent positioning errors from the inertial navigation systems of UUVs, or dead reckoning, underwater terrain observations from sonar sensors are typically exploited. Within the framework of pose-graph optimization, we can generate submaps of the seafloor and use them to add loop-closure constraints to the pose graph by determining the best match between the submaps. However, this approach results in error accumulation in long-term operations because the quality of local submaps depends on the dead reckoning. Hence, we can adopt external acoustic positioning systems, such as an ultrashort baseline (USBL), to add global constraints to the existing pose graph. We assume that the acoustic transponder is installed on a UUV and that the acoustic transceiver is equipped in an unmanned surface vehicle trailing the UUV to maintain an acoustic connection between the vehicles. We simulate the terrain and USBL measurements as well as evaluate the performance of the UUV's pose estimation via online pose-graph optimization.

• The Journal of Korea Robotics Society
• /
• v.8 no.1
• /
• pp.51-57
• /
• 2013

Recently, the number of jellyfish has been rapidly grown because of the global warming, the increase of marine structures, pollution, and etc. The increased jellyfish is a threat to the marine ecosystem and induces a huge damage to fishery industries, seaside power plants, and beach industries. To overcome this problem, a manual jellyfish dissecting device and pump system for jellyfish removal have been developed by researchers. However, the systems need too many human operators and their benefit to cost is not so good. Thus, in this paper, the design, implementation, and experiments of autonomous jellyfish removal robot system, named JEROS, have been presented. The JEROS consists of an unmanned surface vehicle (USV), a device for jellyfish removal, an electrical control system, an autonomous navigation system, and a vision-based jellyfish detection system. The USV was designed as a twin hull-type ship, and a jellyfish removal device consists of a net for gathering jellyfish and a blades-equipped propeller for dissecting jellyfish. The autonomous navigation system starts by generating an efficient path for jellyfish removal when the location of jellyfish is received from a remote server or recognized by a vision system. The location of JEROS is estimated by IMU (Inertial Measurement Unit) and GPS, and jellyfish is eliminated while tracking the path. The performance of the vision-based jellyfish recognition, navigation, and jellyfish removal was demonstrated through field tests in the Masan and Jindong harbors in the southern coast of Korea.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1840-1842
• /
• 1998

Gyroscope is a very important core sensor, as a rotation sensor in inertial space, in inertial guidance and navigation system on aeronautics, plane, vessel and so on for civilian and millitary applications. Mechnical gyroscopes, adopting a principle of spinning a top, have been used in many application system. These mechnical gyroscopes need high power consumption, long warming time and complicated peripheral devices. But fiber-optic gyroscopes, based on the Sagnac effect, have novel advantages as small volume. simple scheme, low power consumption and high reliability. So we have developed a Intermediate grade All-fiber Optic Gyroscope, which has open-loop and minimum reciprocal configuration scheme. We have designed feedback circuits for stability of amplitude and phase using four lock-in amplifier(LIA) circuits and also used for noise limitation. This paper describes the scheme of optical part and electronic part and also test results of this all-fiber optic gyroscope. The performance have been achieved as long-term bias drift of $9.54^{\circ}/h$, random walk of $0.0317^{\circ}/\sqrt{h}$ and dynamic range of ${\pm}150\;deg/s$.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.679-687
• /
• 2019

This paper presents the autonomous swimming technology developed for an Autonomous Underwater Vehicle (AUV) operating in the underwater jacket structure environment. To prevent the position divergence of the inertial navigation system constructed for the primary navigation solution for the vehicle, we've developed kinds of marker-recognition based underwater localization methods using both of optical and acoustic cameras. However, these two methods all require the artificial markers to be located near to the cameras mounted on the vehicle. Therefore, in the case of the vehicle far away from the structure where the markers are usually mounted on, we may need alternative position-aiding solution to guarantee the navigation accuracy. For this purpose, we develop a sonar image processing based underwater localization method using a Forward Looking Sonar (FLS) mounted in front of the vehicle. The primary purpose of this FLS is to detect the obstacles in front of the vehicle. According to the detected obstacle(s), we apply an Occupancy Grid Map (OGM) based path planning algorithm to derive an obstacle collision-free reference path. Experimental studies are carried out in the water tank and also in the Pohang Yeongilman port sea environment to demonstrate the effectiveness of the proposed autonomous swimming technology.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.5
• /
• pp.502-510
• /
• 2009

Laser Inertial Navigation System(LINS) consists of Ring Laser Gyroscopes(RLG) and accelerometers. RLG has a lock-in region in which there is zero output for input angular rates less than 0.1deg/sec. The lock-in region is generated by the imperfect mirrors in RLG. To avoid the lock-in region, sinusoidal motion which is called dither motion is applied on RLG. Therefore without the fault in LINS, the dither motion must be measured by RLG/accelerometer. In this paper, we propose the method to detect the fault of LINS through checking out whether or not the dither motion is always measured by RLG/accelerometer using the Fast Fourier Transformation(FFT) on the real time. The feasibility of the fault detection method proposed in this paper is verified through the stationary and van test.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.706-711
• /
• 2008

This paper is presented an accurate localization scheme for mobile robots based on the fusion of ultrasonic satellite (U-SAT) with inertial navigation system (INS), i.e., sensor fusion. Our aim is to achieve enough accuracy less than 100 mm. The INS consist of a yaw gyro, two wheel-encoders. And the U-SAT consist of four transmitters, a receiver. Besides the localization method in this paper fuse these in an extended Kalman filter. The performance of the localization is verified by simulation and two actual data(straight, curve) gathered from about 0.5 m/s of driving actual driving data. localization methods used are general sensor fusion and sensor fusion through Kalman filter using data from INS. Through the simulation and actual data studies, the experiment show the effectiveness of the proposed method for autonomous mobile robots.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.150-156
• /
• 2007

In this paper, we focus on the fault detection and isolation(FDI) method for inertial navigation system with three two-degree of freedom dynamically tuned gyros(DTG) on orthogonal sensor configuration. we propose the FDI method which can detect the fault of each DTGs rather than the fault of each sensing axis. The proposed FDI method is separated into two FDI modules according to the fault magnitude in order to improve the reliability of fault detection information. For large fault detection, only instantaneous DTG measurement is used to detect a fault DTG within a short time. For small fault detection, the integrated value of DTG measurements are used to detect a fault DTG. It takes a more time to detect a fault but it serves more reliable fault detection information. Using the proposed FDI method with consideration of DTG fault characteristic, we could find out a fault DTG successfully.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.83-92
• /
• 2007

In this paper, we present a design and implementation of three dimensional pointing device using Inertial Navigation System(INS) that acquires coordinates and location information without environmental dependancy. The INS measures coordinates based on the data from gyroscope and accelerometer and corrects the measured data from accelerometer using Kalman-Filter. In order to implement the idea of three dimensional pointing device, we choose a three dimensional Space-recognition mouse and use RFIC wireless communication to send a measured data to receiver for printing out the coordinate on display equipment. Based on INS and Kalman-Filter theoretical knowledge, we design and implement a three dimensional pointing device and verified the usability as an input device that can capture a human's move. also, we describe the applicability of this device in ubiquitous computing environment.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.37-42
• /
• 2023

Wi-Fi Received Signal Strength Indicator (RSSI) is considered one of the most important sensor data types for indoor localization. However, collecting a RSSI fingerprint, which consists of pairs of a RSSI measurement set and a corresponding location, is costly and time-consuming. In this paper, we propose a Wi-Fi RSSI learning technique without true location data to overcome the limitations of static database construction. Instead of the true reference positions, inertial measurement unit (IMU) data are used to generate pseudo locations, which enable a trainer to move during data collection. This improves the efficiency of data collection dramatically. From an experiment it is seen that the proposed algorithm successfully learns the unsupervised Wi-Fi RSSI positioning model, resulting in 2 m accuracy when the cumulative distribution function (CDF) is 0.8.