테두리 보에 의한 휨강성이 확보되지 않은 철근콘크리트 플랫 플레이트의 구조설계는 강도 조건 뿐만 아니라 사용성에 의하여 지배받을 수 있다. 특히, 조기 재령 슬래브의 과하중 작용 및 균열 발생은 시공 중인 플랫 플레이트의 처짐을 크게 증가시키므로, 시공 순서 및 슬래브 처짐에 대한 영향은 플랫 플레이트 시스템 설계의 주요한 요소가 될 수 있다. 이 연구에서는 시공 순서 및 콘크리트 균열 효과를 고려한 슬래브 처짐 산정 과정을 제안한다. 시공단계 및 시공하중이 간편법에 의하여 정의되고, 각 시공단계별로 슬래브 모멘트 및 탄성 처짐, 유효단면2차모멘트가 계산된다. 주열대와 중간대에서의 탄성 처짐은 유효단면2차모멘트 효과에 의해 비탄성 처짐으로 증폭되며, 슬래브 중앙부 처짐은 교차보법에 의하여 산정된다. 제안된 방법은 기존 실험 결과 및 비선형 해석 결과와의 비교를 통하여 검증된다. 또한, 제안법의 적용을 통하여, 시공 중인 플랫 플레이트의 처짐에 대한 시공주기 및 동바리 지지 층 수의 영향이 분석된다.
본 연구는 국내에서 사용되고 있는 대표적인 파형강판 단면에 대하여 구조적 성능을 검토해 본 후, 현재 국내 제강업체에서 생산 가능한 최대 강판 폭을 고려한 최적 형상의 파형강판 단면을 제안하였다. 파형강판 단면의 검토에는 AISI(1986)를 사용하여 강판의 전단력과 모멘트를 고려하여 최적 단면의 역학적 한계를 정하였고, 성형성과 형상, 성형 후의 강판의 폭과 성형 전의 강판의 폭의 비율을 고려하여 기하학적 한계를 정하였다. 기존 파형강판에 본 연구에서 개발한 최적단면 탐색 알고리즘을 적용하여 강판의 성능을 검토 해본 결과, 굽힘반지름이 76mm이고, 내부굽힘각이 $50^{\circ}$ 부근에서 허용하중과 단면이차모멘트가 가장 큰 값을 나타내는 것을 확인할 수 있었다. 또한 현재 국내의 강판 제작성을 고려하여 강판폭 1,550mm, 길이 4,700mm의 SS490 강재를 사용하여 최적 단면 탐색 알고리즘을 적용한 결과, 기존 파형강판보다 두 배 이상의 성능을 발휘할 수 있는 새로운 단면들을 개발하였다.
국제해사기구에서는 해상에서의 선박의 충돌방지와 그로 인한 해양환경의 보호를 목적으로 1993년 11월 선박조종성능에 대한 잠정지침을 채택한 이후, 축적된 데이터를 바탕으로 2002년 12월 선박조종성능에 대한 확정된 지침을 채택하였다. 하지만 채택된 지침은 만재상태, 등흘수 및 선박의 최대 출력(MCR)의 85 %에 해당되는 선속의 최소 90 % 이상에서의 지침으로, 동 지침은 항해사에게 필요한 실 항해조건에서의 조종성능 정보를 제공하는 데 한계가 있다. 따라서 본 연구에서는 항해사, 선장 및 선박조종에 대한 식견을 갖추고 있는 전문가를 대상으로 빈도분석과 AHP 분석기법을 실시하여 현 지침에 대한 활용도 및 실제 선박조종에 필요한 정보가 무엇인지를 식별하였다. 연구결과 선박을 운항하는 항해사에게 필요한 조종성능 정보는 5~10°의 소각도에서의 선회권 정보, 항해속력(Sea speed)이 아닌 조종속력(Maneuvering speed)에서의 z-test 정보라는 것을 확인하였고, 속도제어 관련하여서는 항해속력 및 만재상태에서의 정지성능에 대한 정보보다 감속타력, 가속타력 등에 대한 정보가 더 필요하다는 것을 확인하였다. 도출된 결과는 선박을 조종하는 항해사에게 필요한 선박조종성능기준 지침마련에 대한 기초자료로 활용도가 높을 것으로 사료된다.
제한적인 탄소배출의 필요성과 연계되는 전력수요 증가는 재생에너지산업에서 폭발적인 상승을 가져오고 있다. 전력계통에서 전기공급은 항상 전기수요와 균형을 맞추어야 할 필요가 있고, 안전하고 믿을만한 안정적인 운영을 유지하기 위하여 계통손실이 발생한다. 높은 비율의 재생에너지 보급을 갖는 전력계통에서 과도 안정도, 미소신호 안정도 및 주파수 안정도와 같은 넓은 범위의 3가지의 난제가 있다. 과도안정도는 선로계전기 동작이나 발전기 탈락과 같은 장애에 대한 계통응답을 해석하는 것이다. 미소신호 안정도는 계통관성 저하에 따른 전압불안정, 주파수 급변, 전력진동 등이 발생가능한 계통에서 조그만 증분같은 작은 동요가 일어날 때 전력계통 동기를 유지하기 위한 계통의 기능이다. 주파수 안정도는 발전과 부하 사이에 심한 불균형이 발생하는 중대 계통혼란에서도 정상 주파수를 유지하기 위한 전력계통의 기능으로 간주한다. 본 논문에서 재생에너지 보급계획에 따른 계통모의를 수행하여 3종류 안정도를 검토하며, 또한 재생에너지원이 계통안정도에 미치는 영향을 분석한다.
Reyes-Salazar, Alfredo;Ruiz, Sonia E.;Bojorquez, Eden;Bojorquez, Juan;Llanes-Tizoc, Mario D.
Earthquakes and Structures
/
제11권2호
/
pp.217-243
/
2016
The linear and nonlinear seismic responses of steel buildings with perimeter moment resisting frames and welded connections (WC) are estimated and compared with those of buildings with post-tensioned connections (PC). Two-dimensional (2D) and three-dimensional (3D) structural representations of the buildings as well as global and local response parameters are considered. The seismic responses and structural damage of steel buildings with PC may be significantly smaller than those of the buildings with typical WC. The reasons for this are that the PC buildings dissipate more hysteretic energy and attract smaller inertia forces. The response reduction is larger for global than for local response parameters. The reduction may significantly vary from one structural representation to another. One of the main reasons for this is that the energy dissipation characteristics are quite different for the 2D and 3D models. In addition, in the case of the 3D models, the contribution of each horizontal component to the axial load on an specific column may be in phase each other during some intervals of time, but for some others they may be out of phase. It is not possible to observe this effect on the 2D structural formulation. The implication of this is that 3D structural representation should be used while estimating the effect of the PC on the structural response. Thus, steel frames with post-tensioned bolted connections are a viable option in high seismicity areas due to the fact that brittle failure is prevented and also because of their reduced response and self-centering capacity.
Ship structure is composed of the welded mixture members which are plate and stiffeners. Ship structure is also influenced by variable loadings such as wave and inertia load. There have been several fatigue damage problems on the connection between longitudinal and transverse web due to wide usage of high tensile steel and adoption of wide web space to improve shipbuilding productivity. It is impossible to estimate the fatigue lives for all connection details through refined fatigue analysis. It is necessary to use the simplified approach for the fatigue life estimation of the connection details. PLUS analysis, which is suggested by the classification society, is one of the simplified approaches and is widely adopted to get fatigue lives for the connection details along whole cargo hold area. However, ship building yards still have difficulties to get fatigue lives due to large amount of calculation and time even if this approach reduce the time and amount of calculation. This paper treats the computing system developed to reduce efforts of estimating the fatigue lives. The influence factors of mean shear stress and local dynamic pressure are easily calculated and fatigue lives for all hot spots can be estimated automatically by the developed computing system. It is possible to reduce computing time and efforts to get the fatigue lives for the connection details between longitudinals and transverse webs along the ship. This system was applied to get fatigue lives on the connection details of a VLCC and verified the availability.
본 연구의 목적은 LNG 펌프타워 구조물의 전용 구조해석 GUI를 개발하는데 있다. 이 시스템은 펌프타워 구조물의 유한요소모델을 가장 적절한 형태로 만들어 주며, 가장 적합한 과정을 통하여 해석이 자동으로 수행되도록 해준다. 펌프타워 구조물은 LNG선의 가장 중요한 것 중의 하나이다. 펌프타워 구조물은 주로 카고탱크 안의 LNG가 채워져 있는 양과 선박의 운동에 의한 슬로싱(sloshing) 하중이 주가된다. 그 밖에 하중의 형태는 열, 관성, 자중 등의 세 가지에 대하여도 고려하였다. 이러한 하중들을 범용 유한요소해석 프로그램인 ANSYS에 적용하여 구조해석을 수행하였다. 미국선급협회(ABS) 내의 API Unity check를 통하여 구조부재의 강도 계산과 조인트(Joint)에서의 Punching shear unity 값도 검토하여 그 건전성 여부를 판단할 수 있도록 하였다. 상위의 과정을 새로운 형태의 GUI로 개발하였다. 펌프타워 전용해석 툴(tool)은 Tcl/tk언어로 개발되었다. 위의 모든 과정들이 GUI 성공적으로 적용되었다.
75톤급 액체 로켓 엔진용 터보펌프의 연료펌프 및 터빈에 대한 회전체 동역학 설계가 이루어졌다. 후방 베어링으로부터 터빈까지의 거리를 베어링 하중 설계에 대한 설계 변수로 고려하였고, 터빈의 질량 및 전방 베어링과 후방 베어링의 강성을 변화시키면서 회전속도에 따른 비동기 고유진동수 해석을 수행하여 연료펌프/터빈의 임계속도를 고찰하였다. 터빈의 큰 관성으로 인하여 전방 베어링의 강성이 임계속도에 미치는 영향은 무시할만 한 것으로 나타났다. 후방 베어링의 강성이 $2{\times}10^{8}N/m$ 이상일 경우, 장축의 후방 베어링 간 축길이 및 20 kg이하의 터빈 질량에서 연료펌프/터빈 회전체의 임계속도는 설계속도 11,000 rpm 대비 70% 이상에 있음이 확인되었다.
Workers in the agricultural industry have been exposed to many work-related musculoskeletal disorders. So, our objectives in this study were to measure and analyze worker's physiological bio-information to reduce musculoskeletal disorders in relation to agricultural works. We investigated worker's bio-information of physiological signals during the repeated lifting work such as body temperature, heart rate, blood pressure, physical activity, and heart rate variability. Moreover, we analyzed the workloads of lumbar spine during the repeated lifting work using the 3-axis acceleration and angular velocity sensors. The changes of body temperature was not significant, but the mean heart rate increased from 90/min to 116/min significantly during 30 min of repeated lifting work (p<0.05). The average worker's physical activity(energy consumption rate) was 206 kcal/70kg/h during the repeated lifting work. The workers' acute stress index was more than 80, which indicated a stressful work. Also, the maximum shear force on the disk (L5/S1) of a worker's lumbar spine in static state was 500N, and the maximum inertia moment was 139 $N{\cdot}m$ in dynamic state.
In this study, a flexible multi-body dynamic simulation model of a knuckle boom crane is developed to evaluate the stress of spindle and rack gears under dynamic working conditions. It is difficult to predict potential critical damage to a knuckle boom crane if only the static condition is considered during the development process. To solve this issue, a severe working scenario (high speed with heavy load) was simulated as a boundary condition for testing the integrity of the dynamic simulation model. The crane gear model is defined as a flexible body so contact analysis was performed. The functional motion of a knuckle boom crane is generated by applying forces at each end of the rack gear, which was converted from hydraulic pressure measured for the experiment. The bending and contact stress of gears are theoretically calculated to validate the simulation model. In the simulation, the maximum stress of spindle and rack gears are observed when the crane abruptly stops. Peak impact force is produced at the contact interface between pinion and rack gears due to the inertia force of the boom. However, the maximum stress (bending/contact) of spindle and rack are under the yield stress, which is safe from damage. By using the developed simulation model, the experiment process is expected to be minimized.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.