• 국제지역연구
• /
• 제22권4호
• /
• pp.19-35
• /
• 2018

본 논문은 분석기간 1975:1-2016:4에 걸쳐 한국의 제조업과 서비스업을 대상으로 확률변경 함수로서 초월대수(Translog) 생산함수를 이용하여 총요소생산성을 추정하였다. 또한 추정된 총요소생산성에 영향을 미치는 결정요소로서 산업의 구조와 특성을 반영하는 마크업, 자본탄력도 그리고 수입중간재비중을 포함하는 자기회귀시차모형을 설정하여 총요소생산성의 결정 요소탄력도를 추정하였다. 총요소생산성 증가율은 분석기간 평균값이 제조업은 0.0199 그리고 서비스업은 0.0063으로 추정되었다. 총요소생산성의 마크업탄력도는 제조업은 2.481로 양(+)의 값을 나타낸 반면 서비스업은 -1.403으로 음(-)의 수치를 보이고 있다. 자본집약도 탄력도는 제조업은 0.651 그리고 서비스업은 0.042로 추정되었다. 이러한 실증결과는 산업구조와 특성을 반영하는 마크업과 자본집약도가 제조업과 서비스업의 총요소생산성에 영향을 미치는 중요한 결정변수임을 밝히고 있다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E4호
• /
• pp.163-168
• /
• 2001

Estimating the emission rate of VOCs from a gasoline industry at national level can be a challenging take even though the estimation is mean-based. However, using the procedures in the US EPA AP-42 guidelines, it is possible to approximate the mean industry emission rate once enough data are available. However, this estimate can be misled in the sense that there exist many stochastic factors in the EPA\\`s estimation procedures and also throughout the marketing channels of gasoline industry. Addressing the stochasticity problem in EPA\\`s procedure is hard to tackle because the detailed data needed to execute the estimation are not usually available even from refiners. Instead, this research tries to stay focused on the second type of stochasticity issue, raised from the mean0based metrological and marketing practice data collected from the 4 major refiners. To do so emission raters from each marketing channels (8 marketing points by 3 transportation types and by storage facilities of 4 refiners) are estimated monthly, following AP-42 procedures and using Tank 4.0. Once these estimates are acquired, the distribution of VOC emission rate for each marketing channel of all 4 refiners is estimated through simulation method using @Risk. The mean-based emission rates are weighted by company quantities to estimate the emission rate from the whole gasoline industry. Simple economic implication is provided, based on the result. This study found that, on the mean-bases, about 0.66% of gasoline marketed are evaporated into air. Considering the stochasticity in the estimation, about 90% of simulation results fell into the range of 0.65 to 0.68%. For 90% chance, the estimated economic loss is $54.65 million to $57.17 million, not counting the cost caused by air quality degradation and associated health impact.

• 농업과학연구
• /
• 제46권3호
• /
• pp.461-469
• /
• 2019

The aim of this study was to analyze the contribution of carcass traits (backfat thickness, eye muscle area, carcass weight and marbling score) and the season at slaughter to the price (auction and market) using squared semi-partial correlation. The season at slaughter (summer expressed as season_2, autumn as season_3, and winter as season_4) were added into the estimation as dummy variables, and spring was set as a default variable. In this study, the carcass grades of 22,298 Hanwoo steers slaughtered from 2012 to 2017 were used to performmultiple regression analysis. The rankings of the contribution of the carcass traits and the seasons at slaughter to the auction prices were in the order of marbling score (68.63%), season_4 (11.88%), backfat thickness (10.45%), eye muscle area (6.11%), season_3 (2.19%), season_2 (0.45%) and carcass weight (0.28%). (R-square of the regression = 0.4101). The rankings of the contribution to the total prices were in the order of carcass weight (51.74%), marbling score (32.12%), season_4 (6.04%), backfat thickness (5.54%), eye muscle area (3.22%), season_3 (1.14%), and season_2 (0.19%). (R-Square of the regression = 0.6486). As a result, season_3 and season_4 had a negative effect on the auction price and total price. Because of seasonal event such as Korean Thanksgiving Day and Korean New Year's Day on season_3 and season_4, much supply was needed to meet the high demand. Thus, the seasonal effect at slaughter could be another factor to be cosideredin when considering of slaughter or breeding.

• International Journal of Computer Science & Network Security
• /
• 제21권5호
• /
• pp.57-68
• /
• 2021

Successfully adapting to digital and customer-oriented transformation, the concept of lean manufacturing professes the philosophy of creating greater benefit while minimizing losses. These losses are operations that do not add value in the production process to ensure the efficiency, flexibility, and profitability of projects. In the context of broad automation and digitalization of all sectors of the economy, mechanisms for combining automation technologies and lean production are becoming available. Moreover, when it comes to the efficient use of financial, human, or material resources, it is clear that the use of Industry 4.0 technologies can be an effective tool for achieving the goals of lean production, as many of them pursue the same goal. In this context, this article aims to study the effectiveness of the implementation of project management concepts at the global level and identify the main factors influencing its effectiveness to ensure the achievement of lean production through LEAN technologies and Industry 4.0 technologies. To achieve this goal, several statistical indicators were selected and several statistical methods of analysis were used: pairwise correlation, regression analysis, methods of comparison, synthesis, and generalization. Statistical analysis was conducted according to a survey conducted by the Project Management Institute (PMI) in 2020. An economic-mathematical model of dependence of project effectiveness in different regions of the world on the level of implementation of project management approaches is built, which shows that the increase in project effectiveness by 85% is due to financial losses, technical training, and consumer orientation. These results allow project managers to develop appropriate strategies to improve project management approaches at all levels. It is established that LEAN technologies and technologies of Industry 4.0 have several tools that have a positive effect on minimizing losses following the concept of lean production. Besides, given that the technology of Industry 4.0 is focused on the automation of Lean Production technology, a mechanism for the introduction of lean production using these technologies and methods.

• Fisheries and Aquatic Sciences
• /
• 제8권4호
• /
• pp.189-194
• /
• 2005

Protein, lipid classes, and fatty acid composition, including n-3 highly unsaturated fatty acids (HUFAs), were analyzed in the soft parts, which we differentiated as the adductor muscles and 'other portions,' from the cultured pearl oyster after the pearl was harvested and before the nucleus was grafted to evaluate the nutritional qualities of the soft parts. Total lipid content was higher in the other portions of the soft parts ($1.25-1.26\%$) than in the adductor muscles ($0.58­0.65\%$) in both pearl oyster samples, whereas protein content was higher in the latter ($15.5­18.7\%$) than in the former ($11.2-13.9\%$; P<0.05). The percentage of total lipids (TLs) consisting of phospholipids (PLs) was higher in the adductor muscles ($60.4-68.3\%$) than in the other portions ($40.6-47.0\%$), but the percentage of nonpolar lipids (NLs) was higher in the other portions of the soft parts. The prominent lipid classes were free sterol (FS) and triglyceride (TG) in the NLs and phosphatidylcholine and phosphatidylethanolamine in the PLs. The adductor muscles contained high levels of FS and all PL classes, while the other portions contained high levels of all NL classes, especially TG (but not FS; P<0.05). The prominent fatty acids were 22:6n-3 ($17.2-24.9\%$), 16:0 ($8.35-15.8\%$), 20:5n-3 ($7.95-14.9\%$), 18:0 dimethyl acetal (DMA, $4.79-13.5\%$), 18:0 ($4.50-6.16\%$), and 20:4n-6 ($4.36-5.43\%$). The percentages of 22:6n-3, 20:4n-6, and 18:0 DMA were higher in the adductor muscles than in the other portions of both pearl oyster samples, while those of 20:5n-3 and 16:0 were higher in the other portions (P<0.05). The levels of these food components were similar to those of other bivalves or were higher, especially the protein content, indicating that the soft parts of pearl oysters, which are currently wasted, have food value.

• 자원ㆍ환경경제연구
• /
• 제31권2호
• /
• pp.233-260
• /
• 2022

본 연구에서는 비모수적 분위수 인과관계 검정 방법을 이용하여 국제유가의 변동이 산업별 주가의 움직임에 어떤 영향을 주는지 분석하였다. 본 연구의 분석 대상은 1998년 1월부터 2021년 4월까지 WTI 가격, KOSPI 지수 및 18개 산업별 주가지수의 주별 데이터이다. 비모수 분위수 인과 검정 결과에서 유가 변화가 KOSPI 지수에 미치는 영향은 유의하지 않은 것으로 나타났다. 이는 KOSPI 지수에 포함된 여러 산업의 주가 반응이 서로 다르기 때문이라고 생각된다. 유가 변화에 대한 산업별 주가지수의 반응을 살펴보면, 주식 수익률을 0.1분위부터 0.9분위까지 0.05단위로 나눈 인과관계 결과에서 전체 18개 산업 중 섬유의복, 종이목재, 의약품 등을 포함한 9개 산업에서 인과성이 유의하게 나타났으며, 나머지 9개 산업에서는 유가와의 인과성을 보이지 않았다. 이 산업들 중 세 분위 이상에 걸쳐 연속적으로 인과성이 나타난 산업은 의약품과 통신업(0.45분위 ~ 0.85분위), 섬유의복(0.15분위 ~ 0.45분위), 건설업(0.5분위 ~ 0.6분위) 등 4개 산업으로 인과성이 나타난 구간은 업종마다 차이가 있다. 검정결과를 통해 유가의 변화에 대한 주가 반응에는 산업별로 큰 차이가 있었고, 한 산업에서도 시장 상황에 따라 다르게 나타남을 알 수 있다. 이것은 유가 변화 시기에 투자자들은 포트폴리오를 산업별로 재조정할 필요가 있음을 보여준다. 또한, 정부의 산업정책과 고용정책 등 거시경제정책도 유가 변화 영향이 산업별, 시장 상황별로 차이나는 점을 충분히 고려하여 운영되어야 할 것이다.

• 전자통신동향분석
• /
• 제33권4호
• /
• pp.81-91
• /
• 2018

The purpose of this article is to abstract Industries 4.0 Top documents and express the fundamental strategies. It is clear that disruptive AI + ICBM technology will change the entire industry, and therefore each country is making a strategy to prepare for the future. Example cases are Japan's Monozukuri, Germany's Industry 4.0, the USA's Reshoring, and China's Made in China 2025. I would like to introduce Industrial Industries 4.0 in Germany because Germany used the industrial industries' term first and Korea has as many SMEs as Germany has. The main characteristic is that it can be applied to the size of the individual SMEs rather than the national size.

• 수산해양기술연구
• /
• 제45권1호
• /
• pp.1-13
• /
• 2009

Experimental fishing operation by the shrimp beam trawl was carried out to investigate the bycatch in order to develop the selective fishing gear of the shrimp beam trawl fishery. The experimental trawling was performed by the prototype fishing gear in coast sea of Boryeong, Buan, Kangjin, Tongyeong and Geoje from 30 April to 13 November 2005. Bycatches of the experimental trawling were analyzed species composition, total length composition. The results obtained can be summarized as follows; Target fishes caught by the shrimp beam trawl were Palaemon gravieri, Crangon Hakodatei, Trachysalambria curvirostris, Parapenaeopsis tenellus, Rhynchocinetes uritai and Matapenaeus joyneri. And their fishing rate and total length range were 50.0%, 46.0%, 2.6%, 0.4%, 0.3%, 0.3% and 40-80mm, 40-80mm, 120-150mm, 60-80mm, 60-80mm, 60-120mm respectively. Bycatches caught by the shrimp beam trawl consisted of fishes of 30 kinds, 6 kinds of mollusk, 5 kinds of shellfishes and 3 kinds of crabs. The main fish was Engraulis japonicus, Platycephalus indicus, Paralichthys olivaceus, Leiognathus nuchalis and Conger myriaster, their occupied rate were 47.0%, 16.6%, 13.6%, 5.5%, 2.7% respectively, and their total length range were 60-150mm, 80-410mm, 80-600mm, 30-80mm and 150-460mm respectively. A number bycatch rates of shrimp beam trawl fishery were 99.7% in Buan, 60.0% in Kangjin, 14.6% in Boryeong, 10.6% in Tongyeong and 2.7% in Geoje, The weight bycatch rate were 99.9% in Buan, 75.1% in Kangjin, 57.1% in Tongyeong, 47.4% in Boryeong and 15.4% in Geoje.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권5호
• /
• pp.691-699
• /
• 2013

Three experiments were conducted to evaluate the metabolizable energy (ME) value, standardized ileal digestibility (SID) of amino acids (AA) of soybean meal (SBM), soy protein concentrate (SPC) and fermented soybean meal (FSBM), and the application of these products in early-weaned piglets. In Exp. 1, four barrows with initial body weight (BW) of $14.2{\pm}1.4$ kg were used in a $4{\times}4$ Latin square design. The diet 1 contained corn as the only energy source. The other three diets replaced 25% of corn in diet 1 with one of the three soybean products, and the digestable energy (DE) and ME contents were determined by difference. In Exp. 2, four barrows (initial BW of $18.2{\pm}1.5$ kg) were fitted with ileal T-cannulas and allotted to a $4{\times}4$ Latin square design. Three cornstarch-based diets were formulated using each of the soybean products as the sole source of AA. A nitrogen-free diet was also formulated to measure endogenous losses of AA. In Exp. 3, ninety six piglets (initial BW of $5.6{\pm}0.9$ kg) weaned at $21{\pm}2$ d were blocked by weight and assigned to one of three treatments for a 21-d growth performance study. The control diet was based on corn and SBM, the two treatments' diets contained either 10% SPC or FSBM and were formulated to same SID lysine to ME ratio of 3.6 g/Mcal. The results showed that the ME content of SPC was greater than SBM (p<0.05). The SID of most AA in SPC was greater than the SID of AA in SBM (p<0.05). For the essential AA, the SID of histidine, isoleucine, leucine, lysine and threonine in FSBM were greater than in SBM (p<0.05). Even though they were fed same SID lysine to ME ratio of 3.6 g/Mcal diets, pigs fed SPC and FSBM diets had greater weight gain, G:F (p<0.05) and better fecal score (p<0.05) than pigs fed SBM diet. In conclusion, SPC showed a higher ME content and SID of AA than the SBM. SID of some essential AA in FSBM was higher than SBM and was similar with SPC. But the lower antigenic proteins and anti-nutritional factors content in SPC and FSBM may be the main factors affecting the performance of early-weaned piglets rather than the increased ME content and SID of AA.

• 한국IT서비스학회지
• /
• 제13권4호
• /
• pp.79-91
• /
• 2014

The purpose of this study is to analyze the status and the competitiveness improvement of game contents industry comparing to relative LQ index of the no. of character company, the no. of employee and the amount of revenue of 2011, 2012, and 2013 between including Metro area and regional blocks(kangwon, chungchung, daekung, honam, dongnam and jeju region. The results of this research are as follows. In case including metro regional analysis, no. of employee suggested Metro and Chungchung have high competitiveness in during the 3 years. And in case of no. of game company suggested honam, dongnam and jeju area have high competitiveness between 2012 and 2013. The amount of revenue of game industry indicated the only Metro area have over LQ 1.0 which relative higher competitiveness than the other culture contents industry. But in case of except of Metro, no. of game company indicated honam, jeju have relative high competitiveness over LQ 1.0 and the no. of employee indicated kangwon, chungchung, honam and jeju showed relative competitiveness during 3 years. The amount of revenue of game industry indicated kangwon, chungchung and honam suggested high competitiveness. Honam area have strong competitiveness among three category by regional longitudinal analysis. Kangwon and jeju area suggested 2nd strong regional competitiveness. The main competitiveness of game industry were well established among national industry cluster.