• Steel and Composite Structures
• /
• v.18 no.2
• /
• pp.357-374
• /
• 2015

Orthotropic decks composed of deck plate, ribs, cross beams and wearing surface are frequently used in industry to span long distances due to their light structures and load carrying capacities. As a result they are broadly preferred in industry and there are a lot of bridges of this type exist in the world. Nevertheless, some of them cannot sustain the anticipated service life and damages in form of cracks develop in steel components and wearing surface. Main reason to these damages is seen as the repetitive wheel loads, namely the fatigue loading. Solutions to this problem could be divided into two categories: qualitative and quantitative. Qualitative solutions may be new design methodologies or innovative materials, whereas quantitative solution should be arranging dimensions of deck structure in order to resist wheel loads till the end of service life. Wearing surface on deck plate plays a very important role to avoid or mitigate these damages, since it disperses the load coming on deck structure and increases the bending stiffness of deck plate by forming a composite structure together with it. In this study the effect of Elastic moduli, Poisson ratio and thickness of wearing surface on the stresses emerged in steel deck and wearing surface itself is investigated using a FE-model developed to analyze orthotropic steel bridges.

• Electronics and Telecommunications Trends
• /
• v.33 no.3
• /
• pp.78-88
• /
• 2018

As the unmanned aerial vehicle industry and its related technologies grow each year, the number of abuse cases caused by drones is increasing. In addition to the invasion of privacy caused by indiscriminate photography, terrorism using unmanned aerial vehicles, which have a low detection probability, high location accuracy, and the capability of targeting people or places, as well as carrying chemicals, radiation materials, and small bombs, is becoming a significant problem around the world. Accordingly, many companies are developing anti-drone solutions that consist of various technologies such as radar, EO/IR cameras, and RF jammers to detect and disable unmanned aerial vehicles. This article briefly introduces the recent R&D trends and technical levels of anti-drone technologies.

• Journal of Biomedical Engineering Research
• /
• v.30 no.4
• /
• pp.271-278
• /
• 2009

Recently, robot research and development was interesting the inside and outside of the country. Medical robot surgery showed diverse advantages according to advanced technical robot research. Also the academic society, research institute and industry showed concerning to the medical robot system. There is a growing need to introduce medical research for aging society. The surgical landscape is quickly changing because of the major driving force of robotics. Robot system and biomedical engineering research as defined a new engine of development show present ways of future revitalization of medical robot system. Medical robot system will be even more utilized when we keeps trying to combine high biomedical technique, IT research, and robot technique. In this review article, we begin with a short historical review of medical robotics, followed by an overview of clinical applications where robots have been applied.

• International Journal of Advanced Culture Technology
• /
• v.2 no.1
• /
• pp.25-29
• /
• 2014

China and South Korea have effectively reached a free trade agreement. The deal now faces legal and parliament reviews in the two countries. We need to discuss the recommendations on XML conversion with UN / CEFACT electronic documents. To solve this problem of interworking between these standards, Two kinds of translation rules is proposed for exchanging to UN / CEFACT Tag smoothly. For development and distribution of electronic documents to be conformed to international standards, it is enough to have the role of international activities continue to supply part of the domestic industry and the trends in participation and international standard. Our principal focus is on facilitating national and international transactions, through the simplification and harmonization of processes, procedures and information flows, and so contributing to the growth of global commerce. The agreement with South Korea will be China's ninth bilateral FTA.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.2
• /
• pp.61-66
• /
• 2014

This paper described on the motion of hybrid tractor trajectory for powertrain system. The dynamics behavior used to the tractor according to the characteristics of the road surface using $Daful^@$ analysis. The tractor industry is facing to a big problem about rising gas price and exhaust gas environment. Because it was possible overcoming the past drawback, hybrid vehicle had been decided as the best technical way since it has started operating the internal combustion engine with the electric power as the motive power. The vehicle structures have designed the model of a major power transmission factor. The simulation realized in this paper that motion of tractor being turned by torque and force of each joints. Driving characteristics, especially in recent years, IVHS (Intelligent Vehicle Tractor / System) technology, while receiving a lot of attention because of the tractor and the need to pursue high function is emerging as a more and more.

• Journal of Korean Society for Quality Management
• /
• v.7 no.2
• /
• pp.22-28
• /
• 1979

The problem considered in this paper is to select the vital factor effect to the product quality through the experimental design and analysis of response surface, so as to control the quality improvement of industrial product. In this time, even through the mathematical model is unknown it could be applicable to control the quality of industrial products and to determine optimum operating condition for many technical fields, particulary, for industrial manufacturing process. When a set of data is available from an experimental design, it is often of interest 1:0 fit polynominal repression model in independent variables (eg, time, temperature, pressure, etc) the optimize the response variable (eg. yield, strength etc). This paper proposes a method known to obtain the optimum operating condition, and how to find the condition by using table of orthogonal array experiments, and optimization methodology of statistical model. A criterion can be applied determining to optimum operating conditions in manufacturing industry and improving the fit of response surface which may be used for prediction of responses and quality control of industrial products.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.107-110
• /
• 2005

After the sailing of WTO setup, The opportunity of a trade range extension is provided. OECD joining the change of the domestic construction industry. In 1994, The complete opening of a construction license was allowed As a result, The number of construction companies was increased rapidly. accordingly, We are faced with the new over competition and the problem of the financial difficulty. This paper proposes the plan for the practical technology of the small and middle sized construction companies to be improved and the plan for the working environment of small and middle sized construction companies to be improved. As a method for it, This paper proposes the Losicstics System of the construction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.19-20
• /
• 2016

Domestic construction industry has experienced many difficulties as it has been on a downward. It's a way that active modular structure market to solve this problem. However, as Modular structure technical standard in Korea is in the early stages, our modular factory maufactured rate is almost 40% lower than overseas. Besides, there is less design diversity so it just applies for a few buildings like low-rise building and general group barrackes. To deal with these problems, it is essential to modulating the equipment which can improve the production rate. This will help to ensure the quality, shortening of the construction period, the reduction of labor costs. We have defined the name of segmented by each installation location of the equipment to modulating equipment. And it was examined the suitability of the modulating of the location-specific utility system. The results of the analysis are discussed on the page.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.326-329
• /
• 2004

The electric train is a kind of amusement ride and it is installed in a lot of amusement parks. The object of this study was to analyze and to find out of problem about electrical facilities of amusement electric train. For the purpose of this study, we give careful consideration to the technical standard to be Notification of the Ministry of Commerce, Industry and Energy and foreign electrical codes and we carried out an actual condition investigation on twelve amusement electric trains from among domestic amusement parks. As a result, we could how that there is discrepancy between the electrical regulations and the actual condition.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.49-55
• /
• 2011

Recently, various efforts to make more speedy and precision machine tool to improve productivity and also various efforts to solve environmental problem are going on, so that dry cutting in manufacturing industry, which needs environmental conscious design and development of manufacturing technique, is becoming a very important assignment to solve. Because dry cutting does not use cutting fluid, we need other methods that can be used instead of cutting fluid, which does cooling, lubricating, chip washing, and anti-corrosion. Especially, because turning is a continuous work, the consideration of tool life and surface roughness due to continuous heat and poor lubrication is important. The purposes of this paper are the consideration of how well the compressed air can work instead of cutting fluid, and also the development of the method to select the optimum machining condition by the minimum numbers of experiments through the Taguchi method.