• 문화기술의 융합
• /
• 제10권1호
• /
• pp.281-287
• /
• 2024

일반적으로 운송기기 관련 디자인 교육은 운송 디자인에 특화 된 학과나 또는 산업디자인 전공 내 운송 세부전공의 영역으로 인식되어 왔다. 그러나 기술적, 사회적, 환경적 요인들의 변화에 따라 모빌리티 개념 및 모빌리티 산업 관련 생태계의 다변화가 진행중이고, 그에 따라 모빌리티 관련 디자인의 범주도 더욱 확대되고 있다. 이러한 배경을 바탕으로 본 연구는 모빌리티 디자인 특화 전공은 아니지만, 디자인공학 전공에서 수행된 최근 5년간의 졸업설계주제 가운데, 모빌리티 생태계 관련 주제 선택의 추이 및 유형을 분석하여 시사점을 찾는데 목적이 있다. 연구의 결과 최근 5년간 진행된 총 131개의 졸업설계 작품 가운데 모빌리티 관련성이 높은 작품은 30여 작품이었으며, 그 유형도 매우 다양하였다. 결론적으로 사용자 중심 및 사용자 경험 차원에서 접근한 다양한 주제들이 제안되고 작품화되었다는 점에서, 제품에서 서비스 및 시스템으로 확장되고 있는 모빌리티 생태계의 변화 및 확장이 졸업작품 주제선정에도 반영되고 있음을 확인할 수 있었다.

• 대한인간공학회지
• /
• 제34권2호
• /
• pp.145-149
• /
• 2015

Objective: This study aims to analyze qualitatively if PTS methods are applicable to the agricultural works of Korea. Background: Many studies on setting standard time have been performed for manufacturing and service industries, not many studies on agricultural work have been carried out domestically and internationally. Method: MTM, MOST, Work Factor, MODAPTS were applied to some agricultural works, and limitations of each method were found out. Results: MTM was found to be more applicable than other methods, except for mental works. Conclusion: In general, many Korean agricultural works need squat postures, which are not taken into account in most of PTS methods. Continuous observation with stop watch is recommended for establishing the standard time for the agricultural works of Korea. Application: The information drawn from this study would be helpful to the farmer safety assurance system being established by Korean government.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.176-183
• /
• 2010

The benefits of information technology cannot be obtained unless potential users utilize it for their work. This led to a lot of research works on computer system acceptance. But most of the works address the early stage of system introduction, leaving the learning effect on system acceptance unexplored. In this longitudinal study, two groups of novice and experienced users have been empirically investigated and compared for their acceptance of computer system and for the learning effect of actual usage. A research model based on the technology acceptance theory has been proposed and applied to the two groups. The result shows that the factor job relevance gets more important and the effect of user training on system acceptance diminishes as time passes. This finding may help introducing computer systems which can be easily accepted by users over the whole life cycle period of computer systems.

• 한국안전학회지
• /
• 제9권2호
• /
• pp.26-32
• /
• 1994

It is quite similar in the current automated works likewise in the past manual works that single trivial human error and/or unsafe acts may lead to serious industrial accidents. Though the traditional approach for accident prevention focused on the serious injuries or losses, that was misleaded by failure of accident perception. As Heinrich pointed out, there are still enormous numbers of unsafe acts or near-misses before a real accident happen. Thus, for industrial accident prevention, a research on unsafe acts was committed. With accident data occurred during the last decade, statistics were analyzed for extracting behavioral characteristics. After that, a practical method Integrating AHP and statistics which shows possible accident factors and their priority at an individual factory was suggested. A computer program was developed also.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.77-79
• /
• 2000

Industrial communication networks have attracted much attention in the area of decentralized control systems for factory automation and computer integrated manufacturing. In this paper, we investigate the rate-based traffic control of industrial communication networks employing LonWorks to improve the performance measures of throughput, fairness, and error rates. To this end, we utilize the Feedback channel information through the additional network monitoring node and make the overall system closed-loop. We demonstrate the improved performance of the controlled network system by the experimentation upon an implemented lab-scale network system.

• 대한안전경영과학회지
• /
• 제2권2호
• /
• pp.11-20
• /
• 2000

Today, technologies and automation have been accelerated up in the industrial workplace. Nevertheless, many systems still require humans to handle materials manually. The Low Back Pain (LBP) is one of modern human being's most common and complex ailments. Many risk factors with the onset of LBP have been identified, however, lifting out of Manual Material Handling(MMH) was the most important factor to the LBP. The Virtual Reality(VR) is used in a variety of ways and often in a confusion and misleading manner. In order to solve the prevention of the LBP, a lifting box was translated in the Virtual Environment(VE). As simulating under the VE, optimal lifting works could be constructed. The purpose of this study is to reduce the chronical low back pain for the manual material handlers.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.673-682
• /
• 2016

In this study, we investigated influent and effluent water pollutants in 53 Public Sewage Treatment Works (PSTWs) where industrial wastewater or landfill leachate is combined four times for two years from 2014 to 2015. Also, we analyzed the characteristics of heavy metals and volatile organic carbons at influent and effluent of these PSTWs caused by sewage treatment combined with industrial wastewater or landfill leachate. As a result, six heavy metals such as barium, copper, iron, manganese, nickel and zinc, and four volatile organic carbons (VOCs) including phenols, di(2-)ethylhexyl phthalate (DEHP), formaldehyde and toluene were observed above detection limits in most of PSTWs. Also, it was revealed that six heavy metals such as hexavalent chromium, mercury, cadmium, chromium, nickel and selenium, and four VOCs including 1,1-dichloroethylene, vinyl chloride, naphthalene, and epichlorohydrin were observed more frequently according to precipitation. As a result of reviewing the monitoring data on "Water Quality Monitoring Networks" in lower watersheds of PSTWs, both heavy metals and VOCs were below detection limits, indicating that the effluent water had little influence on the watershed. Nevertheless for the better management of influent and effluent pollutants in PSTWs, it is necessary to establish the advanced management plans for water pollutants in PSTWs, which include a list of priority substances management, monitoring plans, and guidelines for industrial wastewater and landfill leachate combined in PSTWs.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.92-100
• /
• 2018

According to 'The Analysis of Industrial Accidents in 2016' by Ministry of Employment and Labor, the number of deaths caused by accidents in the construction field is 391, accounting for 47% of 826 industrial fatalities in all industries. The breakdown of the 391 fatalities of the construction industry shows that 'struck by an object' accident had 30 fatalities, the 3rd in frequency following falling (235) and crashing (32) accidents. This study aims to explore ways to reduce the 'struck by an object' accident with emphasis on safety education and certificate system for rigging and slinging works. This study reviews literature on rigging and slinging works and analyzes 'struck by an object' accidents. The rules and regulation on the rigging and slinging works are also reviewed both for Korea and other countries with best practices in construction safety such as Singapore, Japan, U.K., and U.S. The rigging and slinging certificate systems of those countries are also reviewed to find any advantage in the construction safety management. In addition, a pilot rigging and slinging certificate system was executed in one of domestic construction site followed by two surveys: one on the riggers who participated in the pilot operation and the other on general managers in domestic construction sites. Based on the analysis of the 'struck by an object' accidents and pilot operation, this study proposes a rigging and slinging certificate system to reduce accidents, enhancing safety condition of construction sites. The certificate system was proposed in a way to accommodate working practice of construction sites. Depending on rigging careers and a crane load capacity, riggers are eligible to apply either basic or master certificate which makes difference in the level of rigging works. The safety condition of rigging and slinging work could be substantially enhanced if workers, managers, supervisors, administrators, and policy makers work together consistently.

• 산업공학
• /
• 제21권4호
• /
• pp.394-402
• /
• 2008

The objective of this paper is to design segmentation algorithm for applying the breast ultrasound image to CAD(Computer Aided Diagnosis). This study is conducted after understanding limits, used algorithm and demands of CAD system by interviewing with a medical doctor and analyzing related works based on a general CAD framework that is consisted of five step-establishment of plan, analysis of needs, design, implementation and test & maintenance. Detection function of CAD is accomplished by Canny algorithm and arithmetic operations for segmentation. In addition to, long computing time is solved by extracting ROI (Region Of Interests) and applying segmentation technical methods based morphology algorithm. Overall course of study is conducted by verification of medical doctor. And validity and verification are satisfied by medical doctor's confirmation. Moreover, manual segmentation of related works, restrictions on the number of tumor and dependency of image resolution etc. was solved. This study is utilized as a support system aided doctors' subjective diagnosis even though a lot of future studies is needed for entire application of CAD system.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.131-140
• /
• 2012

Though there might exist not a few differences between cyclic works and atypical works, many researchers have applied the same assessment techniques that used for repetitive works, which may result introduce bias in their conclusions. This research aimed to verify whether there exist non-negligible work characteristics and/or dissimilarity among works with different work nature and whether one of the most prevalent assessment techniques for assessing ergonomic hazards of musculoskeletal disorders, REBA, can be applied to atypical works. For a general hospital, an automobile repair shop, and two auto-part assembly plants which manufactures quite different parts, a questionnaire survey and field investigation and ergonomic assessment were carried out and analyzed statistically with reference to the 3rd Quantification technique. The results showed that there exist remarkable difference between physical factors in cyclic works and atypical non-cyclic works. As for repetitive work, body posture was significant factors affecting on musculoskeletal disorders while atypical works seemed to have none which implied that the necessity of taking psychosocial factors into account for assessment of hazards. Complain rate in repetitive works was highest shoulder, back, and neck or wrist in sequence. However, there existed no consistent trend in complain rate in atypical works. And, though weight of manufacturing objects was a common factor that can partly explain musculoskeletal complain, time duration was significant in atypical work whereas repeatability and body posture were significant in repetitive works. As being the results, to summarize, it could be said that application of conventional ergonomic assessment techniques regardless of repetitiveness would be fruitless, and that the necessity of a unique methodology focused on atypical non-cyclic works should not be neglected.