• Journal of environmental and Sanitary engineering
• /
• v.14 no.4
• /
• pp.137-142
• /
• 1999

Current semiconductor industry factories are relying on the end-of-pipe treatment technology for waste water treatment and thus they mostly suffer from severe industrial water shortage. As a result in order to solve those waste and industrial water problems, there requires to be changed to the Clean Technology, that is Pollution Prevention Technology. Through above strategic actions with the Clean Technology, we shall strength more powerful and logical environmental pollution prevention system than those in the past. By changing the end-of-pipe treatment technology for waste water treatment and thus they mostly suffer from severe industrial water problems, there requires to be changed to the Clean Technology, that is Pollution Prevention Technology. Through above strategic actions with the Clean Technology, we shall strength more powerful and logical environmental pollution prevention system than those in the past. By changing the end-of-pipe treatment technology with physical, chemical and biological treatment methods as a mixed stream basis for treating of semiconductor waste stream into clean technology with pollution prevention technology as a waste segregation basis, we can bet 20 to 30% investment reduction as compared with end-of-pipe treatment technology.The results for water quality analysis were as follows : 1. Water quality analysis of the before treatment : pH : 9~10.5, Conductivity : $300~7,000{\mu}s/cm$, TDS : more then $3,000mg/{\ell}$, COD : $200~250mg/{\ell}$, SS : $500~600mg/{\ell}$, n-H : $8.3mg/{\ell}$ 2. Water quality analysis of the after treatment : pH : 6.5~7.5, Conductivity : 0.059, TDS : $40{\mu}s/cm$, COD : $20mg/{\ell}$, SS : $5mg/{\ell}$ n-H : $0.6mg/{\ell}$

• Journal of Soil and Groundwater Environment
• /
• v.23 no.4
• /
• pp.48-59
• /
• 2018

Beryllium (Be), cobalt (Co), thallium (Tl) and vanadium (V) are candidates of 21 priority soil pollutants in Korea. The distribution of their concentration in soils from three contamination sources including industrial, roadside and mining areas was investigated. Concentrations of the metals were evaluated quantitatively using pollution indices and the fractionation of metals was conducted using modified SM&T (Standards Measurements and Testing programme) sequential extraction. Concentrations of the metals for all samples from industrial and roadside soils were within the range of natural background levels, while some of Be in soils from abandoned mines exceeded that the range. Enrichment Factor (EF) and Nemerow Integrated Pollution Index (NIPI) for Be, Co, Tl and V showed that there are effects or possibilities of anthropogenic activities. Pollution Load Index (PLI) analyses indicated all investigated sites needed further monitoring. The results of sequential extractions indicated mobile fractions (F1+F2) of Be, Tl and V were below 30% except some of Co in soil, which implies their low mobility to neighboring environment media. Variable tools like sequential extraction, comparison with background/actual concentration and pollution indices, as well as aqua regia extraction should be considered when evaluating Be, Co, Tl, V in soil.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.E
• /
• pp.23-29
• /
• 1995

Relationship between atmospheric aerosol transmissivity and air pollution was analyzed using observed data in a large industrial city, Pusan, Korea. The atmospheric aerosol transmissivity predicted by method of present study in Pusan was assessed by the method of Yamamoto et al.(1968) in order to set up an empirical model to predict the transmissivity using the various meteorological parameters and air pollution. As a result, good correlation between these tow method re observed. Thus, it is possible to conclude that the parameterization of air pollution suggested by this study is another method to give reliable estimate of atmospheric aerosol transmissivity and direct solar irradiance in Pusan.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.303-308
• /
• 2013

We estimated sediment pollution by the analysis of COD and AVS. We also estimated the contents of Cu, Cd, Pb, Zn in sediment of Gwangyang bay, Mokpo inner bay and Shinan Bigum coastal area from 2011 July to 2012 February. In these results of sediment COD and AVS show III level pollution in Mokpo inner bay, however Gwangyang and Shinan Bigum coast show I level pollution. The results of Igeo show over 2 on the contents of Cu and Cd in Gwangyang bay and Mokpo inner bay. It also know that Igeo can more and detail estimate sediment pollution in industrial coastal area. These results show that it is suitable to estimated sediment pollution by COD and AVS with trace metal in industrial and initial polluted coastal area rather than analysis of COD and AVS only in coastal area.

• 월간산업보건
• /
• s.53
• /
• pp.31-37
• /
• 1992

• Journal of Environmental Health Sciences
• /
• v.34 no.1
• /
• pp.1-11
• /
• 2008

The purpose of this study was to investigate air quality in Chungju, Korea, using data obtained with a local air quality monitoring system. We have utilised cohort studies to investigate the relations between environmental pollution and the health of residents near large industrial complexes since 2004. This study analyzes the $O_3,\;NO_2,\;SO_2,\;CO\;and\;PM_{10}$ concentration in Chungju from 2002 to 2006. Air pollutants are closely related to the number of manufacturing facilities and cars, energy utilization and weather conditions. Generally, the diurnal concentration of air pollutants in Chungju reached the highest level in the morning (about$08:00{\sim}$) and early evening (about$19:00{\sim}$). On the other hand, the diurnal concentration of ozone as recorded gives the highest amount in late afternoon (about$16:00{\sim}$) and lowest in early morning (about$08:00{\sim}$). The concentration of air pollutants in Chungju was highest from winter to spring and lowest during the summer season. On the other hand, the monthly variation of ozone concentration was greatest in June and smallest in December. Also the, $PM_{10}$ concentration posted the highest record in April and the lowest during September. In general, this study analyzed air pollution changes in Chungju as well as in large scale industrial complex regions within Korea such as Ulsan, Pohang, Kwangyang, Sihwa Panwol and Gangneung in Korea. We compared the air quality of Chungju with those of these cites and found that air pollutants except for CO in Chungju was generally lower than large industrial complex regions.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.4
• /
• pp.350-357
• /
• 2011

In the recent, it is gradually important for airport to consider environmental aspects as sustainable development is emerged. ICAO, FAA and individual countries has tried to reduce airport noise and pollution. Thus, the effort is needed to incorporate environmental factor into productivity indicator of airport. Our paper use DEA method with the non-parametric directional output distance function(DDF) to assess productivity of 14 airports in Korea during 2008~2010. In addition to three inputs, two conventional outputs, two undesirable outputs have been considered : noise and air pollution. Results are compared from models that do not include undesirable outputs. Inclusion in the analysis of the undesirable effects of airport operations leads to greater and closer airport's efficiency scores.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.71-75
• /
• 2006

Problem of the environmental pollution and pollution by vast quantity occurrence of industrial waste by progress of industry is risen recently. Is real condition that waste foundry sand to be industrial waste that happen in casting industry of them has much the occurrence amount and the processing method is depending on most simplicity reclamation and so on. Therefore, by using waste foundry sand in the world by fine aggregate for mortar in recycling side of industrial waste necessity of development for new principal parts aggregate is risen along with rise of aggregate price by exhaustion phenomenon of natrual resources, wish to analyze physical and mechanical properties special quality and foretell practical use possibility availability.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.3
• /
• pp.54-61
• /
• 2007

Machining processes produce high accurate metallic parts in metal working industries. Lubrication for machining enhances quality of machined surface and it prolongs the life of cutting tools. Since lubricant is poisonous to human body and environment, it causes occupational diseases for workers and air pollution in environment. Because of these problems generated, developed countries do not permit the excessive usage of lubricant in machining shops. This research focuses on the development of MQL machining technique that consumes minimal amount of lubricant, which reduces possible outbreak of occupational diseases and air pollution. This research sets experimental equipments for MQL machining. Experiments for this study are designed with major machining parameters in MQL. Through the analysis of experiments, this paper presents the optimal machining parameters.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.5
• /
• pp.69-78
• /
• 2009

In order to improve water quality of upper watershed of Paldang reservoir, it is necessary to evaluate non-point source pollution loads and identify critical watershed pollution sources. A GIS based Soil and Water Assessment Tool was applied to evaluate model application and reliability, estimate NPS pollution load, identify critical watershed by NPS pollution sources, and suggest various best management practices for Kyongan Stream watershed. Yearly NPS pollution loads were estimated 30.0% SS, 60.1% TN and 35.4% TP, respectably. The watershed pollution load is mainly decided by precipitation condition and SS and nutrients load have a significant regression relationship. Based on 10-year average yearly NPS pollution load, critical sub-watersheds were identified. The No. 5 and 17 which have lots of relatively intensive agricultural fields and scattered industrial area were vary critical sub-watersheds and under more intensive pollution load. In order to control critical watershed, watershed best management practices such as scientific fertilizer, contour farming and parallel terrace, transferring the sloppy farmland to grass or forest and constructing a buffer zone, and constructing wetlands and retention ponds will be applied. Overall the SWAT model can be efficiently used for identification of critical sub-watersheds in order to develop a priority watershed management plan to reduce water pollutions.