• Title/Summary/Keyword: Industrial exposure

Search Result 1,413, Processing Time 0.375 seconds

An Evaluation on Airborne Particulate and It's Components in the Welding Workplace for the Ship Construction Industry (조선업 용접작업장의 공기중 입자상물질 및 구성성분에 관한 연구)

  • Kang, Yong-Seon;Shin, Joong-Kyu;Lee, Song-Kwon;Yoon, Chung-Sik;Lim, Moo-Hyuk;Park, Man-Chul;Sim, Sang-Hyo
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.17 no.3
    • /
    • pp.245-253
    • /
    • 2007
  • This research was performed to evaluate the airborne personal concentration of hazardouse materials during the process of ship construction and surveyed from May 23 to June 30, 2007 in Kyungnam West Distirct, Korea. The subject was 94 ship construction workers exposed to welding fume and respirable particulate. The airborne concentrations of those were compared to Permissible Exposure Limit(PEL) from the Ministry of Labor in Korea. The airborne concentration of 23 samples(48.9%) of welding fumes was less than $5mg/m^3$, that of 16 (34.0%) was between 5 and $10mg/m^3$, and that of 8 (17.0%) was greater than $10mg/m^3$. The airborne concentration of 27 (57.4%) of respirable particulate masses was less than $5mg/m^3$ and the othere are greater than $5mg/m^3$. The welding fumes were identified containing the heavy metasl such as Fe, Mn, Zn, Mg, Ca, and Cu. The respirable particulates has similiar tendency with welding fumes in the component of heavy metals. But the concentration of Ca, Cu, Cr, and Ni turned out to be higher in welding fumes. Twenty (42.6%) of the 47 samples of welding fumes were exceeded PEL. In the heavy metals in welding fumes, ten (21.3%) of the 47 samples of Mn were exceeded PEL. Based on the results, the higher airborne hazardous materials were still exposed to wokers in ship construction process. It is suggested that the appropriate engineering control be applied to minimize the exposed cocnetration in ship building processes.

Contents of Sulfur, Fluorine, Wax and Chlorophyll in Needle Tissue and Needle Growth of Pinus thunbergii as Bioindicators of Air Pollution (대기오염(大氣汚染) 지역의 해송엽내(海松葉內) 수용성(水溶性) 황(黃), 불소(弗素), WAX, 엽록소(葉綠素) 함량(含量) 및 엽(葉) 생장(生長)의 변화와 생물지표성(生物指標性))

  • Kim, Joon Sun;Kim, Yong Hwan;Lee, Han Yol
    • Journal of Korean Society of Forest Science
    • /
    • v.82 no.4
    • /
    • pp.347-353
    • /
    • 1993
  • Accumulation of air pollutants such as $SO_2$ and HF, chlorophyll contents, wax concentrations in needle tissue and needle growth of Pinus thunbergii were studied to verify possibilities of bioindicators of air pollution in Yochon Industrial Complex from July to October, 1991. The concentrations of water-soluble sulfur and fluorine increased nearer to the pollution sources regardless of sampling time, but water-soluble sulfur varied little during investigation and fluorine accumulated more with the passage of time. Total chlorophyll contents decreased a little in the slightly polluted site but sharply in the heavily polluted site. The higher the pollution level was, the more decreased chloroform-extractable wax. Air pollution exposure inhibited needle growth of Pinus tbunbergii during the latter part of growth period. Water soluble sulfur, fluorine and wax concentrations in needle of Pinus thunbergii were rather wood sensitive indicators of susceptibility to ambient air pollution from early July to early October. Chlorophyll contents seemed to be able to be used as a bioindicator of air pollution in early stage of needle development and in the severely polluted area. In the meanwhile needle length must be used as a bioindicator in latter part of growing season.

  • PDF

Effects of Manganese Exposure on the Testis Function and Serum Prolactin Concentration in Rat (망간 노출이 흰쥐의 정소기능과 혈청 프로락틴 농도에 미치는 영향)

  • Lee, Chae-Kwan
    • Development and Reproduction
    • /
    • v.13 no.4
    • /
    • pp.321-327
    • /
    • 2009
  • This study aimed to examine the testis toxicities of metal compound, manganese (Mn), which may be generated as mist or fume in the industrial sites. As well as serum prolactin (PRL) concentration was analyzed because Mn accumulation in basal ganglia up-regulates serum PRL and hyperprolactinemia consecutively induces the testis toxicity. Male F344 rats were divided into the 4 groups (2 controls and 2 Mn treated groups, n=10) on the basis of the test condition (inhalation, Mn $1.5mg/m^3$ or not) and treatment period (for 4-weeks and 13-weeks). The treatment time was 6 hr. a day, 5 days a week for the whole body. Basic tests including changes in body weight, feed rate were observed. Blood and testis Mn concentration, and testis toxicity test such as the number and deformity test of sperm were also observed. Serum PRL level was analyzed by ELISA to certify the relationship between the Mn induced increase of the serum PRL level and sperm production. Blood and testis Mn concentrations were significantly and dose-dependently increased. Sperm count was decreased in Mn-treatment groups than control in a treatment time dependent manner. Morphological analysis of cauda epidydimal sperm showed that the frequencies of morphologically abnormal sperms such as bent tail and small head were increased in the both Mn-treatment groups than control. A significant increase in serum PRL levels was found in response to Mn treatment but it was not hyperprolactinemia range. These results suggest that treatment of Mn up-regulates the serum PRL concentration and induces the testis toxicity. The No Aversed Effect Level (NOAEL) of inhaled Mn on the male rat testis may be under the $1.5mg/m^3$.

  • PDF

An Asbestos Risk Assessment and Areal Distribution of Asbestos Containing Materials in Public Buildings (석면함유 공공 건축물의 위해성 평가 및 면적 분포 특성)

  • Song, Su-Jin;Jang, Bong-Ki;Jo, Bong-Hyun;Kim, Yeong-Ji;Heo, Eun-Hyeop;Lee, Joung-Dae;Son, Bu-Soon;Lee, Jong-Wha
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.26 no.3
    • /
    • pp.267-276
    • /
    • 2016
  • Objectives: This study, aims to examine the distribution characteristics of asbestos-containing building materials; risk assessment and area of distribution of asbestos-containing building materials depending on year of construction; building materials; types of building materials; and usage in public buildings in order to create fundamental data for safe management of public buildings. Methods: The asbestos investigation was conducted by an asbestos research institution from March to May 2014, targeting 41 public buildings which were subject to asbestos investigation in South Chungcheong-do Province. With respect to 381 presumed asbestos-containing materials, an investigation was conducted into whether they contained asbestos, asbestos type, content, year of construction, and use in the building were examined, and a risk assessment was performed. Results: Asbestos-containing building materials were used in 35 buildings(85.4%). Among them, 31(88.6%) were public buildings. Asbestos was detected in 73% of 381 suspected asbestos-containing materials, which were mostly ceiling materials (85.2%). The older the buildings, the more they showed a tendency to have a significantly higher risk assessment score. The ratio of average area with asbestos-containing building materials to total floor area was 57.6%, 44.1%, and 17.8% for buildings built in the 1980s, 1990s, and 2000s, respectively. This showed a tendency to be significantly higher with the age of the building. Conclusions: From the results above, it can be concluded that with the age of the buildings, the risk assessment score and the ratio of average area with asbestos-containing building materials to total floor area became significantly higher. Given the concern about the exposure to asbestos of residents and civil petitioners, safety management of older public buildings and measures for dismantling and removal of asbestos-containing building materials should therefore be urgently established.

Comparison of Airborne Asbestos Concentrations from Soils in Naturally Occurring Asbestos(NOA) Areas - Activity Based Sampling(ABS) vs. Real-time Asbestos Fiber Monitor(F-1 fiber monitor) - (자연발생석면지역의 토양 내 석면함유율에 따른 비산석면 농도평가 - 활동근거시료채취방법(ABS)과 실시간 섬유 측정 장치(F-1 fiber monitor) 결과 비교 -)

  • Jang, Kwangmyung;Park, Kyunghoon;Choi, Sungwon;Kim, Hyunwook
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.27 no.3
    • /
    • pp.245-256
    • /
    • 2017
  • Objectives: The present study is aimed at performing real-time measurement of fibrous materials using an F-1 fiber monitor, investigating the correlations between the measurements and environmental conditions, and assessing the feasibility of the use of the monitor in actual exposure assessments based on the accuracy and reliability of the device. Methods: Asbestos specimens with a fixed asbestos content were dispersed in a chamber and collected with a particle measuring test device. Measurements obtained by the existing PCM method, and with the F-1 fiber monitor were compared. In addition, concentrations of asbestos fibers obtained by the PCM method, the TEM method, and the F-1 fiber monitor were compared with that of specific ABS scenarios in NOA regions. Correlations of asbestos contents in soil and weather conditions with each method of measurement were analyzed. Results: Laboratory results showed that levels of asbestos fibers measured with each method increased as fiber contents in soil increased. In the accuracy and reproducibility assessment, no significant differences were found between the different methods of measurement. On-site assessment results showed positive correlations among the methods, and these correlations were less significant compared with what was shown by the laboratory results. Levels of asbestos fibers increased as asbestos contents in soil increased, and as temperature increased. Levels of asbestos fibers decreased as humidity increased, and wind speed did not significantly affect the extent to which asbestos fibers were scattered. Conclusions: While it would be premature to replace existing methods with the use of F-1 fiber monitors in real sites based on the results of this study, the monitor may be useful in the screening of the sites, which assesses hazard levels in different regions. Replacement of existing methods with the use of F-1 fiber monitors may be possible after the limitations identified in this study are overcome, and additional assessment data are obtained and reviewed under different conditions to confirm the reliability of the monitor in future research. Obtained assessment results may be used as basic data for the assessment of asbestos hazard in NOA regions.

Relationships between a Calculated Mass Concentration and a Measured Concentration of PM2.5 and Respirable Particle Matter Sampling Direct-Reading Instruments in Taconite Mines (타코나이트 광산 공정에서의 실시간 질량측정기기와 실시간 수농도의 환산에 의한 질량농도와의 연관성)

  • Chung, Eun-Kyo;Jang, Jae-Kil;Song, Se-Wook;Kim, Jeongho
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.24 no.1
    • /
    • pp.65-73
    • /
    • 2014
  • Objectives: The purposes of this study are to investigate workers' exposures to respirable particles generated in taconite mines and to compare two metric methods for mass concentrations using direct-reading instruments. Methods: Air monitorings were conducted at six mines where subjects have been exposed primarily to particulate matters in crushing, concentrating, and pelletizing processes. Air samples were collected during 4 hours of the entire work shift for similarly exposure groups(SEGs) of nine jobs(N=37). Following instruments were employed to evaluate the workplace: a nanoparticle aerosol monitor(particle size range; 10-1000 nm, unit: ${\mu}m^2/cc$, Model 9000, TSI Inc.); DustTrak air monitors($PM_{10}$, $PM_{2.5}$, unit: $mg/m^3$, Model 8520, TSI Inc.); a condensation particle counter(size range; 20-1000 nm, unit: #/cc, P-Trak 8525, TSI Inc.); and an optical particle counter(particle number by size range $0.3-25{\mu}m$, unit: #/cc, Aerotrak 9306, TSI Inc.). Results: The highest airborne concentration among SEGs was for furnace operator followed by pelletizing maintenance workers in number of particle and surface area, but not in mass concentrations. The geometric means of $PM_{2.5}$ by the DustTrak and the Ptrak/Aerotrak were $0.04{\mu}m$(GSD 2.52) and $0.07{\mu}m$(GSD 2.60), respectively. Also, the geometric means of RPM by the DustTrak and the Ptrak/Aerotrak were $0.16{\mu}m$(GSD 2.24) and $0.32{\mu}m$(GSD 3.24), respectively. The Pearson correlation coefficient for DustTrak $PM_{2.5}$ and Ptrak/Aerotrak $PM_{2.5}$ was 0.56, and that of DustTrak RPM and Ptrak/Aerotrak RPM was 0.65, indicating a moderate positive association between the two sampling methods. Surface area and number concentration were highly correlated($R^2$ = 0.80), while $PM_{2.5}$ and RPM were also statistically correlated each other($R^2$ = 0.79). Conclusions: The results suggest that it is possible to measure airborne particulates by mass concentrations or particle number concentrations using real-time instruments instead of using the DustTrak Aerosol monitor that monitor mass concentrations only.

A Study on the Case Analysis and Health Management of Patients with Pesticide Poisoning from Spraying Pesticide in Hospitals in the Chungnam, Korea (충남 일부 지역 병의원의 농약살포 중 중독 사례 분석 및 보건관리방안 연구)

  • Moon, Sun-In;Choi, Jihee;Roh, Sangchul
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.29 no.4
    • /
    • pp.541-549
    • /
    • 2019
  • Objectives: This study aims to examine patients who developed acute pesticide poisoning while spraying or using pesticide and presented to the emergency department in hospitals in Chungcheongnam-do Province. Based on the findings, this study will provide implications for safety and health management pertaining to the use of pesticides. Methods: Pesticide poisoning data collected by the Chungnam Center for Farmers' Safety and Health from 2014 to 2018 was cross-sectionally analyzed. A total of 331 patients with pesticide poisoning presented to one of hospitals and four of medical centers in the region(Dankuk University Hospital, Gongju and Hongsung, Cheongyang, Cheonan Medical Center). Seventeen of these patients (15 men and two women) developed poisoning while spraying pesticide. The patients' charts were reviewed to collect data on pesticide poisoning, namely currently working in farming-related occupation, means of transportation to the hospital, place of poisoning, symptoms of acute pesticide poisoning, treatment, pesticide used when poisoning occurred, and classification by technical ingredients. Results: Fifteen out of 17 patients who developed poisoning while spraying pesticide were men. Insecticide was used in 35.3% of the cases, and herbicide was used in 29.4% of the cases, which was different from cases of poisoning from ingestion poisoning. The major symptoms were vomiting (35.3%), nausea (29.4%), dizziness (29.4%), and headache (23.5%). A total 11 ingredients were identified in 12 patients, and the most common ingredient was glyphosate, which is an herbicide. Most patients showed a state of mild toxicity, but two patients showed a state of severe toxicity. These patients respectively used glyphosate and paraquat. Conclusions: Our findings can be useful for suggesting the need for a national healthcare system to manage occupational pesticide poisoning among farmers. Further, these findings can be used to increase the awareness of the risk of acute poisoning during pesticide spraying and suggest the need for a safety health education to increase farmers' awareness of pesticide poisoning.

Bactericidal Efficacy of Vital-Oxide®, Disinfectant Solution Against Salmonella Typhimurium and Brucella Ovis

  • Cha, Chun-Nam;Lee, Yeo-Eun;Kang, In-Jin;Yoo, Chang-Yeul;An, Sun-Jeong;Kim, Suk;Lee, Hu-Jang
    • Journal of Food Hygiene and Safety
    • /
    • v.27 no.1
    • /
    • pp.50-54
    • /
    • 2012
  • $Salmonella$ spp. and $Brucella$ spp. have caused a considerable disease of farmed animals and economic loss in animal farming and food industry. In this study, the disinfection efficacy of Vital-$Oxidel^{(R)}$, a commercial disinfectant, composed to chlorine dioxide, betaine hydrochloride, and propylene glycol was evaluated against $S.$ $typhimurium$ and $Brucella$ $ovis$. A bactericidal efficacy test by broth dilution method was used to determine the lowest effective dilution of the disinfectant following exposure to test bacteria for 30 min at $4^{\circ}C$. Vital-$Oixdel^{(R)}$ and test bacteria were diluted with distilled water (DW), hard water (HW) or organic matter suspension (OM) according to treatment condition. On OM condition, the bactericidal activity of Vital-$Oixdel^{(R)}$ against S. typhimurium and Brucella ovis was lowered compared to that on HW condition. As Vital-$Oxidel^{(R)}$ possesses bactericidal efficacy against animal pathogenic bacteria such as $S.$ $typhimurium$ and $Brucella$ $ovis$, this disinfectant solution can be used to control the spread of bacterial diseases.

Application of UV Curable Coating for the Surface Protection of Polymeric Materials: PVC and Polystyrene (고분자 물질의 표면 보호를 위한 자외선 경화 도료의 응용)

  • Moon, Myung-Jun;Park, Jin-Hwan;Lee, Gun-Dae;Suh, Cha-Soo;Kim, Jong-Rae
    • Applied Chemistry for Engineering
    • /
    • v.2 no.2
    • /
    • pp.175-184
    • /
    • 1991
  • Ultraviolet curable coatings are often used to protect the surface of polymer materials exposed to the ultraviolet radiation. However, the adhesion of epoxy acrylate on poly(vinyl chloride) and the UV curable coating on polystyren are poor. The objective of this work was to improve the adhesion of coating according to various formulations of the reactive diluents and finishing methods using the photografting of multifunctional acrylate and the surface activation on polymer surface impregnated a phtoinitiator. The addition of Tripropylene glycole diacrlate in the formulation of coating results in the improvement of adhesion of coating due to the flexibility. But the increase of the crosslinking density which results from the oxidation of surface during the exposure of UV radiation caused the loss of adhesion of coating exept the photografting method. In the trimethylolpropane triacrylate the improvement of adhesion are considerable due to the chemical bond between multifundtional acrylate and surface. From this work we expect to achieve the varity and functionality in the formulation of coating according to the photografting and surface activating of polymer.

  • PDF

Bactericidal Efficacy of a Disinfectant Spray Containing a Grapefruit-seed Extract, Citric acid, Malic acid and Benzalkonium Chloride against Salmonella Typhimurium and Brucella ovis

  • Cha, Chun-Nam;Park, Eun-Kee;Jung, Ji-Youn;Yoo, Chang-Yeul;Kim, Suk;Lee, Hu-Jang
    • Journal of Food Hygiene and Safety
    • /
    • v.31 no.4
    • /
    • pp.299-303
    • /
    • 2016
  • Salmonella spp. and Brucella spp. can cause considerable diseases on both humans and animals. In addition, these microorganisms cause the economic loss in animal farming and food industry. In this study, the disinfection efficacy of a disinfectant spray, composed to grapefruit seed extract, citric acid, malic acid and benzalkonium chloride, was evaluated against S. Typhimurium and B. ovis. A bactericidal efficacy test by broth dilution method was used to determine the lowest effective dilution of the disinfectant following exposure to test bacteria for 30 min at $4^{\circ}C$. The disinfectant and test bacteria were diluted with hard water (HW) or organic matter suspension (OM) according to treatment condition. On HW condition, the bactericidal activity of the disinfectant spray against S. Typhimurium and B. ovis was 5 and 4 fold dilutions, respectively. On OM condition, the bactericidal activity of the disinfectant spray was 2 and 1 fold dilutions against S. Typhimurium and B. ovis, respectively. As the disinfectant spray possesses bactericidal efficacy against foodborne pathogens such as S. Typhimurium and B. ovis, the disinfectant spray can be used to control the spread of bacterial diseases.