• 한국산업보건학회지
• /
• 제31권4호
• /
• pp.342-352
• /
• 2021

Objectives: This study analyzed the local exposure levels of radiation emitted from the equipment with soft X-ray ionizers to investigate the radiation exposure levels in Liquid Crystal Display(LCD) manufacturing processes. Methods: This study measured the local radiation levels for the equipment installed in two LCD manufacturing companies. The equipment were installed at diverse processes and equipped with various number of ionizers. The local radiation levels were measured on the surface of the equipment by using direct reading equipment, and the measurements were converted into annual effective dose by considering the radiation exposure time of workers. Statistical analyses were performed to investigate the radiation exposure characteristics. Results: Annual effective doses for 97.6% of the equipment being measured were less than 1 mSv. However, the range of annual effective doses was 0.004 mSv ~ 2.167 mSv, which indicated a large variation among the equipment. Statistical analyses of the study found that this large variation was raised due to improper shielding of the equipment rather than process and/or equipment characteristics. To pinpoint the cause of this large variation in annual effective dose, this study improved the shielding of the equipment being radiated over 1 mSv and found that their average effective dose was reduced from 1.604 mSv to 0.126 mSv after shielding improvement. Conclusions: Relatively high exposure levels of radiation were observed in some equipment where their shielding were insufficiently thick and/or sealed. This finding implies that the shielding of the equipment is an important engineering countermeasure to control the radiation exposure levels in industries.

• 산업융합연구
• /
• 제21권6호
• /
• pp.43-51
• /
• 2023

본 연구는 노인들이 주로 사용하는 야외운동 기구의 특허 현황을 분석하여 노인들의 건강증진을 위한 기초 자료 활용에 목적이 있다. 특허 검색은 특허청 정보 검색 서비스인 키프리스에서 수집하였다. 검색어는 '야외운동기구'이며, 직접적으로 관련된 특허 157건을 최종 선정하여 분석하였다. 분석 결과 첫째, 시대별 특허 경향은 2007년부터 특허 등록이 시작되었으며, 매년 2-3건의 특허가 등록되었다. 둘째, 발전모듈이 작동하여 전기를 생산할 수 있고, 사용자 운동량에 정보를 제공하거나 특성상 중량추 분실 및 도난과 안전사고 방지 등 무선 통신 이용 운동처방 시스템을 제공하는 스포츠융합 관점의 특허가 조사되었다. 마지막으로 사용자 편의성 제공, 운동기구 사용빈도를 증가시킬 수 있는 운동기구 관련 특허가 조사되었다. 본 연구 결과를 통해 야외운동기구가 점점 노인과 편의성 중심으로 개발된다는 점과 기업 및 공공기관에서 노인 야외운동기구에 관심 확대가 나타나고 있음을 파악하였다. 향후 실용적이고 편리한 야외운동기구 개발을 위하여 특허 추이 분석 이외에 야외 운동기구 활용 운동 프로그램과 연계한 후속적인 연구가 필요하겠다.

• 드라이브 ㆍ 컨트롤
• /
• 제2권2호
• /
• pp.21-25
• /
• 2005

• 안전기술
• /
• 제153호
• /
• pp.62-63
• /
• 2010

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 춘계학술대회
• /
• pp.169-174
• /
• 2003

• 안전기술
• /
• 제151호
• /
• pp.62-63
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.359-360
• /
• 2012

• 드라이브 ㆍ 컨트롤
• /
• 제17권2호
• /
• pp.1-8
• /
• 2020

Recently, industrial systems are becoming quicker and lighter to enable the reduction of energy consumption and increase productivity. So the latest systems are more flexible and rapid than the previous systems. But, with this improvement, another problem has emerged, such as the increase in residual vibration when a system is started or stopped. The input shaper is a command generation method that can remove residual vibration. It can provide a solution to the problem of residual vibration in industrial systems. However, it is difficult to generate the input shaper in high order systems, such as a typical industrial system because the input shaper is induced from the system's vibration characteristics. This study focused on the extra insensitivity shaper that can compensate for the system's modeling error such as input dynamics, and the high order's system affection. A genetic algorithm was deployed to adjust a vibration limitation for the extra insensitivity of the input shaper. A plant is a low damping system that includes one zero and a pole. The fitness functions are an error signal of the system's response with normalized frequency variations. Verification of the suggested system is satisfied by comparison between the zero vibration derivative input shaper's response and the suggested one.

• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2472-2478
• /
• 2012

본 연구는 반도체 산업에서 반도체장비 유지보수에 사용되어지는 반도체장비 유지보수 분야의 전문기술인력을 효과적으로 양성할 수 있는 반도체장비 유지보수의 자격종목을 개발하고자 하는데 그 목적이 있다. 연구의 목적을 달성하기 위하여 반도체장비 유지보수 분야의 국내외 실태 조사, 문헌조사를 통하여 반도체장비 유지보수 관련 교육훈련기관 및 검정 수요 예상 인력을 파악했으며, 유사자격제도(전자부품장착기능사, 전자부품장착산업기사, 생산자동화기능사, 생산자동화산업기사)를 분석하였고, 직무분석을 통하여 반도체장비유지보수기능사의 직무 및 교육내용을 분석하였다. 또한 반도체장비 유지보수 자격종목 신설에 대한 설문조사를 실시했으며, 반도체장비유지보수기능사 자격종목의 출제기준 및 채점 방법을 제시했고, 필기시험과 실기시험에 대한 모의 검정시험도 실시하였다. 이러한 결과를 토대로 반도체장비유지보수기능사에 대한 교육프로그램을 만들었으며, 자격검정을 실시할 수 있는 출제기준을 제시하였다.

• 산업경영시스템학회지
• /
• 제41권1호
• /
• pp.94-101
• /
• 2018

With the development of industrial technology and science, production and manufacturing facilities have been enhanced and improved, and the importance of the safety of workers has also been regulated and limited by various safety management methods. As a way to secure the safety of the workers from the production facility, the fail-safe and fool-proof methods are now being applied. Any possible insecure behavior and unsafe conditions can be removed by adopting the standards and specifications that are now secure the safety of workers and equipment. This research analyzes EN ISO 13849-1 international and European standards during CE certification. In order to secure acceptable reduced risks, the risk assessment process of ISO 12100 and the processes for reducing its risk are applied. In the current ISO 13849-1 standard, the criteria for the required performance level PLr (Required Performance Level) for the applicable risk and safety functions through the risk assessment are subjective and not subdivided. Therefore, the evaluation criteria are likely to cause judge's judgement error due to qualitative judgement. This research focuses on evaluation and acceptable performance level setting for the safety circuit of the equipment. We propose an objective and specific evaluation criteria to secure safety, and the proposed evaluation criteria are applied to the case study of the safety circuit for the equipment. In order to secure the safety of the entire safety circuit, the improvement of the MTTFd and DC level related to the SRP/CS (Safety-Related Parts of Control Systems)' lifetime is required for the future research.