• 감성과학
• /
• 제15권2호
• /
• pp.269-282
• /
• 2012

Laboratory equipment will continue to be developed and created as long as experiments continue. Up until now, the designs have been focused on the functional role; successfully process the study purpose. However, nowadays, the requirements of providing emotional satisfaction of the design, has increased. Even so, the users are normally limited by specific groups and investments on these designs have been neglected due to small annual production by the small market. Through this study, we have conducted an emotional evaluation on Temperature and Humidity Chamber's (TH Chamber) exterior shape. First of all, we extracted emotional words and placed them in categories that represent these emotions and conducted an emotional evaluation on four typical TH chamber models. They were selected based on its door lock type and control box type. The result showed that the 'fixed type' of control box and the 'handle type' of door lock were most favorable by the users, satisfying the five representative emotions; 'Attractiveness', 'Classiness', 'Comfortableness', 'Pleasant' and 'Satisfaction in Usability'. Particularly, all 4 emotional words in the 'Satisfaction in Usability' category recorded over 3.65. This indicates that Satisfaction in Usability is relatively an important category when expressing laboratory equipment. The result of this research is expected to be used as a basic data to find a way of right approach in laboratory equipment design.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.111-121
• /
• 2016

The plant equipment usually has a long life cycle. During its O&M (Operation & Maintenance) phase, since the occurrence of an accident of offshore plant equipment causes catastrophic damage, it is necessary to make more efforts for managing critical offshore equipment. Nowadays due to the emerging ICTs (Information Communication Technologies) and sensor technologies, it is possible to gather the health status data of important offshore equipment and their environment data, which leads to much concern on CBM (Condition-Based Maintenance). In this study, we will propose an approach to estimate the remaining lifetime of an offshore plant equipment (pump tower) based on gathered ocean environment data.

• 터널과지하공간
• /
• 제23권4호
• /
• pp.271-279
• /
• 2013

본 기술보고에서는 천공장비의 종류와 작동방식에 대해 간략히 소개하였다. 이 중 탑해머 방식의 천공기에 탑재되는 부품 및 세부 기술을 조사하였다. 탑해머 천공기술에 연관된 국내외 기술현황을 분석하고, 국내 기술수준과 선진기술 수준을 비교하였다. 이를 바탕으로 천공 관련 융복합 기술의 연구개발 필요성을 토의하고, 선진국과 기술격차를 줄이기 위한 천공산업의 미래 전략을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제51권6호
• /
• pp.923-937
• /
• 2014

The rational finite element method is different from the standard finite element method, which is constructed using basic solutions of the governing differential equations as interpolation functions in the elements. Therefore, it is superior to the isoparametric approach because of its obvious physical meaning and accuracy; it has successfully been applied to the isotropic elasticity problem. In this paper, the formulation of rational finite elements for plane orthotropic elasticity problems is deduced. This method is formulated directly in the physical domain with full consideration of the requirements of the patch test. Based on the number of element nodes and the interpolation functions, different approaches are applied with complete polynomial interpolation functions. Then, two special stiffness matrixes of elements with four and five nodes are deduced as a representative application. In addition, some typical numerical examples are considered to evaluate the performance of the elements. The numerical results demonstrate that the present method has a high level of accuracy and is an effective technique for solving plane orthotropic elasticity problems.

• 산업경영시스템학회지
• /
• 제37권3호
• /
• pp.16-23
• /
• 2014

Most of metal cutting and processing companies are going through the difficulties such as frequent downtime and high failure rates by missing times to replace parts of CNC equipment. The reason is that the correct operation times of expensive CNC equipment can't be calculated. In this paper, to solve this problem, we try to construct the intelligent production information system for a case company and analyze its expected effects. The effects are as follows. First, it saves money about 3 million won each year during the useful life of three years by reducing downtime and failure rates, and increasing production rates etc. Second, it makes easily find and fix the cause of faulty through traceability of the production process, and enables to perform a systematic facility management through the calculation of reliable equipment's overall efficiency. This case can be easily applied in similar industries, and will contribute greatly to enhancing the competitiveness of related industries.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2274-2276
• /
• 1999

In this work, temperature rise and eddy current distribution on the enclosure and conductor of 3 pole gas insulated switchgear were investigated using analytical and experimental measures. The design of the diameters of the conductors and the enclosures of a meal clad gas insulated switchgear is primarily based on the insulation requirements. It is very difficult problem to predict the temperature rise of enclosed switchgear due to the complexity of the phenomena of heat transfer and existence of eddy current loss. To overcome this situations, we focused on the eddy current distribution on the enclosure of switchgear caused by high current 3 pole conductor as a fundamental basis. The experimental results about temperature distribution of 3 pole gas insulated switchgear were reported and measurements are compared with predictions of three-dimensional thermal model for eddy current analysis. As a result, three dimensional numerical analysis found to be in close relationship with experimental results and thermal model is efficient to predict the abnormal temperature rise in switchgear.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.142-156
• /
• 2015

A new method for ship Inner Shell optimization, which is called Parametric Inner Shell Optimization Method (PISOM), is presented in this paper in order to improve both hull performance and design efficiency of transport ship. The foundation of PISOM is the parametric Inner Shell Plate (ISP) model, which is a fully-associative model driven by dimensions. A method to create parametric ISP model is proposed, including geometric primitives, geometric constraints, geometric constraint solving etc. The standard optimization procedure of ship ISP optimization based on parametric ISP model is put forward, and an efficient optimization approach for typical transport ship is developed based on this procedure. This approach takes the section area of ISP and the other dominant parameters as variables, while all the design requirements such as propeller immersion, fore bottom wave slap, bridge visibility, longitudinal strength etc, are made constraints. The optimization objective is maximum volume of cargo oil tanker/cargo hold, and the genetic algorithm is used to solve this optimization model. This method is applied to the optimization of a product oil tanker and a bulk carrier, and it is proved to be effective, highly efficient, and engineering practical.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.81-91
• /
• 2010

This study carried out the investigation about the actual conditions of the management, disaster analysis and safety awareness on excavator in one of construction equipment and tried to make it's preventive measures. To achieve this, first of all, the accident of the internal Construction Industry process Investigation and Analysis, and then analyze an cause of accident based on it. Next, For the conditions of safety management conduct a survey to Investigation and Analysis and Propose preventive measures. The results of this study can be summarized as follows. 1st, Status of safety awareness and management of construction equipment tend to seek quickly and easily for the interests of sight. 2nd, Half the precincts of the equipment is causing major disaster. 3rd, The risk of excavator operation's indicators and drivers is so much potential. 4th, The preventive measures are needed for strengthening safety education, professional legal education, changes in safety awareness, the development of prevention system.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권3호
• /
• pp.246-255
• /
• 2017

Purpose: This study proposes the optimal PM (preventive maintenance) policy of leased equipment for lessee's decision-making using two types of reliability condition. Methods: We consider reliability threshold based PM model. Equipment reliability is estimated and used as condition variable. The effect of repair for maintenance is imperfect and represented by age reduction factor. Results: We provide two PM policies. Policy 1 is focused on minimized total cost. This policy guarantees reliability threshold until last maintenance action. Policy 2 focus on maintaining reliability threshold during leased period. The proposed approach provides optimal reliability threshold under number of PM. Through result, we finally construct decision-making process for lessee using reliability threshold and end of reliability. Conclusion: This study provides two PM policy for lessee's decision-making. Through numerical example, we get a result of optimal reliability threshold, number of PM, optimum alternative under lessee's reliability condition.

• Structural Engineering and Mechanics
• /
• 제43권1호
• /
• pp.1-13
• /
• 2012

A fast precise integration method (FPIM) is proposed for solving structural dynamics problems. It is based on the original precise integration method (PIM) that utilizes the sparse nature of the system matrices and especially the physical features found in structural dynamics problems. A physical interpretation of the matrix exponential is given, which leads to an efficient algorithm for both its evaluation and subsequently the solution of large-scale structural dynamics problems. The proposed algorithm is accurate, efficient and requires less computer storage than previous techniques.