• 산업경영시스템학회지
• /
• 제26권3호
• /
• pp.31-38
• /
• 2003

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surface process equipment by automation for the work method of boner process can be substitute work method by water jet To development of equipment, There is to be down noise and dust. According to remove calamity growth hazardous substance in the work environment, there is to solve workplace avoidance factor.

• 대한안전경영과학회지
• /
• 제14권4호
• /
• pp.169-175
• /
• 2012

Self-Inspection is being used in the workplace hazardous, dangerous machinery and equipment to build capacity for the voluntary safety risks due to use of machinery and prevention of industrial accidents that inspect facilities for safety issues, is to check. However, December 31, 2008 as part of Article 36 of the Occupational Safety and Health Act (safety inspection), the financial vanish as the self-test, Safety inspection program has been changed., In each individual workplace that creates its own standards and regulations to use the existing inspection system is in some cases. This study is located in the southeast industrial complex as a risk reducer manufacturer, machine-based target zones in S Corp owns most of the crane based on the results of the tests is to analyze the problem. Then check the results - to bring its measures and information you need to know for sure is to propose.

• 대한안전경영과학회지
• /
• 제18권4호
• /
• pp.91-97
• /
• 2016

Hospital costing has generally been using ABC costing method. However, based on increase of expensive equipment, the fixed cost is increased in the hospital industry. The most common equipment industry are using building block costing method for depreciation and equipment management costing elements. Additionally it presents three options that may be considered to be supported by the IT system to find the most appropriate alternative.

• 전자통신동향분석
• /
• 제36권4호
• /
• pp.110-117
• /
• 2021

The development of core technologies in the 4th Industrial Revolution, such as artificial intelligence, big data, and the intelligent Internet of Things, promote digital transformation and intelligence of the manufacturing industry. To realize them, there is an increasing demand for materials, components, and equipment needed for final goods. In particular, the expansion of global value chain instability due to changes in the external environment, such as the U.S.-China trade dispute, Japan's export regulations, and Covid-19 pandemic, increases the importance of strengthening the materials, components, and equipment industry in the global market. Thus, this study presents a strategic direction for securing global industrial competitiveness of materials, components, and equipment using Michael Porter's diamond model approach.

• International Journal of Advanced Culture Technology
• /
• 제10권1호
• /
• pp.302-309
• /
• 2022

Occupational safety accidents are caused by various factors, and it is difficult to predict when and why they occur, and it is directly related to the lives of workers, so the interest in safety accidents is increasing every year. Therefore, in order to reduce safety accidents at industrial fields, workers are required to wear personal protective equipment. In this paper, we proposes a method to automatically check whether workers are wearing safety helmets among the protective equipment in the industrial field. It detects whether or not the helmet is worn using YOLOv5, a computer vision-based deep learning object detection algorithm. We transfer learning the s model among Yolov5 models with different learning rates and epochs, evaluate the performance, and select the optimal model. The selected model showed a performance of 0.959 mAP.

• 디지털융복합연구
• /
• 제9권1호
• /
• pp.37-49
• /
• 2011

The purpose of this study is to develop a new equipment acceptance model in the industrial market and test it empirically using a field survey. To define new equipment acceptance factors of employees in the organization, we used the TAM as a useful model to analyze the acceptance process of new equipment. All of the data for the TAM were collected from the employees. Prior research studied the usage of general information technology using a computer and particular software, while we apply the TAM to the new equipment adoption. In this study, both theoretical review and empirical study were conducted and the model was set through the theoretical study which was tested through the empirical analysis. Management support and training/education were shown to have a positive effect on PU and PEOU. Personal innovativeness, management support, perceived usefulness and perceived ease of use were shown to have a positive effect on behavioral intention.

• Journal of Information Processing Systems
• /
• 제16권6호
• /
• pp.1271-1280
• /
• 2020

The yield and quality of a micromanufacturing process are important management factors. In real-world situations, it is difficult to achieve a high yield from a manufacturing process because the products are produced through multiple nanoscale manufacturing processes. Therefore, it is necessary to identify the processes and equipment that lead to low yields. This paper proposes an analytical method to identify the processes and equipment that cause a defect in the plastic ball grid array (PBGA) during the manufacturing process using logistic regression and stepwise variable selection. The proposed method was tested with the lot trace records of a real work site. The records included the sequence of equipment that the lot had passed through and the number of faults of each type in the lot. We demonstrated that the test results reflect the real situation in a PBGA manufacturing process, and the major equipment parameters were then controlled to confirm the improvement in yield; the yield improved by approximately 20%.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.137-144
• /
• 2015

Development of the yarn sorting equipment (khonhook) by slide way due to the principle of engineering that cause of workers on the long of motion time. The data was collected from the weaving group Ban Nongkok village, Nakornratchasima Province, THAILAND. According to the study, the step of yarn sorting (konhook) was one of the steps that affect long of motion time. The problem was the inadequate capacity equipment. The objective of research was to study and develop the yarn sorting equipment (konhook). The fabric used in the study was 64 meters in length and 1 meter in width. Researchers studied the processes the yarn sorting (konhook) which it consists of seven sub steps, 1) the thread tube setting, 2) yarn bunching, 3) tying a knot at the end of yarn, 4) looping the yarn into a pillar, 5) sorting the yarn (konhook), 6) crossing pillars and 7) taking out the yarn. Researchers focused on studying yarn sorting process (konhook) by designing and creating a device for yarn sorting (konhook) for reducing yarn sorting (konhook) time by the original method performance indicators. The results found that the developed yarn sorting equipment (konhook) ) by slide way could reduce working time from 7.24 minutes to 6.08 minutes of the original equipment yarn sorting (konhook). This means it could make the process 16.02 % faster. This also helps reducing the distance of workers' movement from 2,234 meters to 8 meters. This is 99.64 % shorter.

• 한국컴퓨터정보학회논문지
• /
• 제27권11호
• /
• pp.139-145
• /
• 2022

소비자들이 원하는 제품이 다양해지면서, 경쟁력 있는 제품을 생산하기 위해 자동화 장비의 종류가 다양해지고, 고도화 되어 가고 있다. 일반적으로 장비들은 운영자가 효율적으로 장비를 감시하고, 신속하게 조작할 수 있도록 사용자용 인터페이스 장치(HMI)를 내장하여 제작하고 있다. HMI 장치는 다양한 산업용 컨트롤러와 연결되기 때문에, 디자인하는 단계에서 다양한 컨트롤러의 통신 프로토콜 등의 요소를 이해하고 설정해야 한다. 비전문가들은 다양한 프로토콜 중 호환 가능한 항목을 선택하는데 어려움이 존재할 뿐만 아니라, 화면과 설정이 정적으로 할당되므로 하나의 기기에서 통합 운용하는데 한계가 존재한다. 본 논문에서는 모바일 장치를 사용하여, QR코드로 장비의 ID, 통신 프로토콜 등의 정보를 스캔하고, 산업용 컨트롤러에 접속하여 원격으로 표시된 장비 화면을 조작할 수 있는 모델을 제안한다. 제안 모델은 하나의 모바일 장치를 활용하여 다양한 자동화 장비의 통신 환경을 쉽게 설정하고, 감시 및 조작할 수 있어 자동화 장비의 점검 및 관리에 효율이 증대될 것으로 기대된다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2008년도 추계학술발표논문집
• /
• pp.160-163
• /
• 2008

This study developed selecting equipment for damage of street lamp circuit used by current transform and diode. To develop this system, current check used current transform and indication system used LED device. As faulted, current of street lamp circuit change with fault decivce. This chage of current detected and indicated by selecting equipment