• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.522-526
• /
• 2010

Heat storage application techniques can be categorized into the sensible heat storage and the latent heat storage according to the method of heat storage. Heat storage is the way of saving remaining heat when heating and cooling loads are light, and then using it when the heating and cooling loads are heavy. Latent heat storage is defined as the method of saving heat by using substances which have high potential heat when phase change is in the range of a certain temperature and when heat storage space is small, compared to those of sensible heat storage and it is possible that absorption and emission of heat at a certain temperature. This study is conducted to save energy when either air-conditioning or heating is operated in a building. We have tried to find out the essential properties of matter and the optimum mixing rate about cement and gypsum for building materials, which have been widely used for proper phase change materials (PCM), when thermal environment property is applied. So we obtained the result of the cooling delay effect about 19% with heat storage mortar containing 3 wt% of PCM.

• Korean journal of food and cookery science
• /
• v.21 no.4 s.88
• /
• pp.545-555
• /
• 2005

The physicochemical and microbial characteristics of Oiji prepared with dry salting method, which has been used industrially for industry, were investigated. Low salting and low storage temperature were employed:extremely low salting extremely low temperature; ESET $(5\%,\;0^{\circ}C)$, very low salting extremely low temperature;VSET $(10\%,\;0^{\circ}C)$, extremely low salting very low temperature; ESVT$(5\%,\;5^{\circ}C)$, low salting very low temperature; VSVT$(10\%,\;5^{\circ}C)$ and high salting low temperature;HSLT$(30\%,\;10^{\circ}C)$ for control. Acidity was lower, and pH was higher in VSET, in of which the fermentation pattern was similar with that of HSLT The time required to reach the optimum acidity ($0.3\%$ lactic acid) was longer delayed for VSET (168 days), than for compared to ESVT (51 days). During storage of Oiji, greenness (-a) as measured with of the Hunter color system wasshowed the highest in VSET, and the lowest while in ESVT, the lowest. Total microbial and lactic acid bacteria counts number were the lowest in HSLT and VSET and were the lowest than in other groups, while the highest in ESVT. Yeast was not detected in HSLT, but was the highest while in VSVT. E coli coliform and listeria were detected in the $5\%$ salting groups, although Salmonella was not detected in any of the all groups. Texture profile analysis demonstrated exhibited that fracturability and hardness were highest in HSLT and VSET, compared to the other groups. Scores of over-all preference for ESVT and HSLT were higher atwith 6.3 and 6.2, respectively, compared to the other products. Based on these results, lower saltiness less than $10\%$ and lower storage temperature (less than $5^{\circ}C$) condition was optimum for maximizing the better for good quality of industrial Oiji preparation in industry.

• Applied Biological Chemistry
• /
• v.41 no.2
• /
• pp.181-186
• /
• 1998

The effects of sewage treatment on characteristics of sludge as a composting material were investigated for a year during the initial operation at the full-scale Chunan sewage treatment plant. Due to the shortage of design capacity of belt press, a sludge dewatering unit, non-volatile solids were recirculating and concentrating in the treatment plant, resulting in an increase of MLSS and a decrease in F/M ratio at the activated sludge system. Special attention is required for long term operations since the increase of non-volatile solids in the plant would deteriorates the treatment efficiency. The sewage sludge of the Chunan sewage treatment plant showed 79.5% of water content, 11.6% of organic content, and C/N ratio of 6.1, and contained As 1.8 mg/kg, Cd 27 mg/kg, Hg <0.1 mg/kg, Pb 54 mg/kg, T-Cr 370 mg/kg, and Cu 1,100mg/kg of heavy metals. In order to be used as raw material for optimum composting, the sewage sludge requires bulking agents for moistrure/porosity control and a carbon source for adjusting C/N ratio. However, the sewage sludge is not adequate as a soil conditioner after composing due to a high content of heavy metals. If the sewage sludge has to he used as a soil conditioner after composting, it as required to identify and remove tire industrial wastewater portions in tire influent of the plant since heavy metals in the influent were mostly concentrated in dewatered sludge.

• Safety and Health at Work
• /
• v.4 no.3
• /
• pp.142-148
• /
• 2013

Background: To elucidate the relationship between seven occupational dermatoses (ODs) and 20 types of work in Greece. Methods: This was a prevalence epidemiologic study of certain ODs among 4,000 workers employed in 20 types of enterprise, in 104 companies, in 2006-2012, using data from company medical records, questionnaires, occupational medical, and special examinations. The ${\chi}^2$ test was applied to reveal statistically significant relationships between types of enterprises and occurrence of ODs. Results: A high percentage (39.9%) of employees included in the study population suffered from ODs. The highest prevalence rates were noted among hairdressers (of contact dermatitis: 30%), cooks (of contact dermatitis: 29.5%), bitumen workers (of acne: 23.5%), car industry workers (of mechanical injury: 15%), construction workers (of contact urticaria: 29.5%), industrial cleaning workers (of chemical burns: 13%), and farmers (of malignant tumors: 5.5%).We observed several statistical significant correlations between ODs (acute and chronic contact dermatitis, urticaria, mechanical injury, acne, burns, skin cancer) and certain types of enterprises. There was no statistically significant correlation between gender and prevalence of ODs, except for dermatoses caused by mechanical injuries afflicting mainly men [${\chi}^2(1)=13.40$, p < 0.001] and for chronic contact dermatitis [${\chi}^2(1)=5.53$, p=0.019] afflicting mainly women. Conclusion: Prevalence of ODs is high in Greece, contrary to all official reports by the Greek National Institute of Health. There is a need to introduce a nationwide voluntary surveillance system for reporting ODs and to enhance skin protection measures at work.

• International Commerce and Information Review
• /
• v.16 no.2
• /
• pp.47-67
• /
• 2014

Since the global financial crisis, criticism against the integrity of financial institutions proposed new financial regulations such as Basel III. These systems are expected to have impacts multilaterally on management and structure of mid- and long-term financial industry. It is also believed that financial institutions will inevitably review business model to respond to these enhanced regulations. The ongoing global financial regulation pursues regulation scope extension, introduction of global regulatory capital system, introduction of global liquidity, etc. As for quantitative index, Basel Committee on Banking Supervision is promoting QIS which is discussed mainly on implementation time from the juridical point of view. This study aims to present domestic banking industry's structural changes depending on regulation enhancement of foreign countries after global financial crisis, and suggest strategy that improves competitiveness of products. Looking at the research result, global financial regulation requires compliance with the regulations through treaties but it shows negative time center around banks. Furthermore, it is also pointed out financially advanced countries' passive attitude on regulation enhancement is problem. Therefore, regulations differentiated between developing and developed countries, dualistic regulations on financial industry, participation of advanced nations, etc are the postulation to change the structure of financial industry.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.546-555
• /
• 2019

The purpose of this study was to improve the performance of the bogie-type crematory, which is the mainstream of domestic crematory equipment. A field scale technology was investigated via increasing the volume by changing the shape of the furnace and reducing the cremation time and saving the energy usage through the optimization of burner combustion control. First, the optimized structural design through thermal flow analysis increases the volume of the main combustion chamber by about 70%, which increases the residence time of the combustion flue gas. A designed pilot crematory was then installed and the combustion behavior was tested under various operating conditions and the optimum operating plan was derived from for each furnace shape. Based on the results, the practically applicable crematory was designed and installed at Y crematorium in the P City. Optimal combustion conditions could be derived through operating the demonstration crematory furnace. The crematory time and fuel consumption could be minimized by increasing the energy efficiency by increasing the residence time of high temperature combustion flue gas. In other words, the crematory time and fuel consumption were 38 min and $21.8Nm^3$, respectively which were shortened by 44.1 and 54.4% lower than that of the existing crematory, respectively.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.141-146
• /
• 2019

Economic analysis predicts that the drone market will grow, and the growth of the toy and hobby drone market is expected to gradually expand. Drone expectations are rising due to the net economic function of drone market growth, but accidents due to improper management and operations are also increasing. The difference in toy drone performance is incomparably small compared to industrial drone performance, but the ordinary buyer can not know whether the difference can cause an accident during use. The toy drones used in this study were obtained from KC and CE certification, and 20 kinds of drones were used. The flight time ranged from a minimum of 3 minutes to a maximum of 12 minutes, and the control distance ranged from a minimum of 20m to a maximum of 380m. Therefore, it is necessary to secure product safety through sampling inspection of the radio wave output of toy drones, and it is also necessary to mount an algorithm that automatically lowers the altitude or hover when exceeding the limit flight distance. For future research, we will build data to establish toy drone safety standards through a altitude testing and impact testing of toy drone.

• Korean journal of applied entomology
• /
• v.60 no.2
• /
• pp.215-220
• /
• 2021

To establish the systematic biological control system for various insect pests in strawberry under plastic houses, we were investigated the biological traits of lesser strawberry aphid, Chaetosiphon minus (Forbes), as a target pest. The lesser strawberry aphid is adapted to low temperatures while examining the availability of and selecting useful natural enemies. The development, survivorship and reproduction of lesser strawberry aphid were evaluated at four constant temperatures (10, 15, 20, and 25℃). The developmental periods of the nymphal stages ranged from 41.7 d at 10℃ to 9.8 d at 25℃. The developmental threshold temperature and degree day of nymphal stages are 5.5℃ and 185 DD. The reproduction rate (R₀) was higher at 20℃ (30.16) than at 25℃ (22.38). The 50 % survival rate and maximum longevity of adult females were 31 d and 59 d at 20℃, and 25 d and 36 d at 25℃, respectively. The average progeny per female was 35 at 20℃, and 26 at 25℃. We confirmed that compared to other strawberry aphids under plastic houses, the lesser strawberry aphid is more adapted to lower temperatures. It is, therefore, necessary to commercialize natural enemies such as syrphid flies with high activity at low temperatures.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.376-381
• /
• 2011

The baking performance of Cudrania tricuspidata leaf powder as a value-added food ingredient was investigated in a model system of sponge cakes. Cudrania tricuspidata leaf powder was incorporated into cake batter at 5 levels (0, 5, 10, 15, and 20%, w/w) by adding equivalent amount based on total weight of wheat flour. The specific volume, height, moisture content, volume index, and symmetry index of sponge cakes decreased significantly with the increase in Cudrania tricuspidata leaf powder content (p < 0.05). Sponge cakes became darker and firmer with increase in Cudrania tricuspidata leaf powder content (p < 0.05), as indicated by decrease in the $L^*$ and increase in the firmness measured by the texture measuring instrument. Total polyphenol content also increased gradually as the Cudrania tricuspidata leaf powder content increased. Finally, the consumer acceptance test indicated that addition of Cudrania tricuspidata leaf powder up to 10% in the formulation of sponge cakes did not significantly influence the consumers' acceptability with respect to taste and flavor. In addition, the overall acceptability was not different from each other for control and 5% sample (p > 0.05).

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.1
• /
• pp.21-28
• /
• 2020

In this paper, a new type of electric wheelbarrow is proposed and developed. The developed electric wheelbarrow is equipped with an attitude reference system(ARS) sensor, which consists of 3-axis acceleration sensor and 2-axis Gyro sensor so that it can estimate pitch angle and roll angle. When an operator tilts the wheelbarrow up and down, the pitch angle is detected. The sign of the pitch angle is interpreted as the operator's intention for moving the wheelbarrow forward or backward and the controller drives the wheel of the wheelbarrow with the velocity according to the magnitude of the detected pitch angle. A cargo box of the wheelbarrow is designed to rotate and is controlled to maintain level always, so an operator can handle the electric wheelbarrow easily and safely. The wheelbarrow consists of an in-wheel motor, a DC motor, motor drives, an ARS sensor considering economical use in industrial field. Three experiments are performed to verify the feasibility and stability of the electric wheelbarrow.