• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1970-1971
• /
• 2007

The efficiency of such work highly depend on the worker's safety, who is protected by tools such as gloves, sleeves, blankets and flexible coverings among other manufactured natural-rubber goods. Use, storage and maintenance of these tools guarantee the quality and durability of the material. However, it might be observed that good tools made of such material are disapproved of when received from manufacturers or when they are removed from the warehouse for replacement. This work shows the experimental results obtained from ageing at a temperature of $100^{\circ}C$ for 48, 70 and 312 h, although the application of AC electrical tension in samples and the measuring of current leakage are presented. The measurements in samples were carried out with samples prepared from the deformulated commercial materials and respectively reformulated into thin films. The obtained results showed the mechanisms of conduction of samples in low and high electric fields. It was also identified an electric tension transition showing that in low fields it prevails the Ohm's law conduction, and in high electric fields it prevails the conduction of space charge limited current (SCLC). These results can support the natural rubber formulation process having as their main objective the reducing of the mechanisms that occur under high conduction current in high electric fields, which leads the material to a dielectric breakdown. It is necessary to research this raw material from different internationally standard clones to characterize dielectric and electric properties for industrial applications. Moreover, this natural material has a low commercial price when compared to the synthetic ones.

• 한국산업보건학회지
• /
• 제22권2호
• /
• pp.107-118
• /
• 2012

Objectives: This study examines the occurrence of disease resulting from low back pain and factors of working environment meaningfully influencing the occurrence of lumbago as well as analyzes '2nd Korean Working Condition Survey (KWCS)' conducted in 2010 so as to establish the prevention and improvement measures. Methods: The analysis method is that it is to compare the prevalence rate of low back pain according to working environment via odds ratio and to implement the test about the factors having the difference in working environment between low back pain group and normal group through weighted t-test. Results: As a result, it indicates that there is a meaningful difference for prevalence rate of low back pain according to age, status in employment and education level which are socio-demographical factors. The analysis in working hours shows that the period of work is a factor raising the prevalence rate of low back pain rather than weekly working hours. The analysis in the work risk factor indicates that the increase in prevalence rate of low back pain takes place to either workers with repetitive movement and continuously standing posture or those with heavy stress and emotional labour. Conclusions: Workers with low back pain have suffered from accident, depression, anxiety disorder and sleep. The factors in which the prevalence rate of low back pain decrease are to provide information on health and safety and working speed, and enough rest.

• 한국산업보건학회지
• /
• 제22권1호
• /
• pp.61-72
• /
• 2012

Background: The purpose of this study was to analyze the associations between physical therapists' work-related musculoskeletal pain, quality of life (QoL), and presenteeism. Methods: Self-reported questionnaires were given to 402 physical therapists in Korea. Variables examined included the prevalence of pain sites related to work, pain intensity, pain pattern, pain frequency, pain duration, pain rating score (PRS), general characteristics, QoL, and presenteeism. Results: Of the 314 physical therapists who responded, 251 (79.9%) reported work -related musculoskeletal pain in at least one body part. The most affected regions included the wrist and hand (21.0%), shoulder (19.6%), and lower back (19.1%). On average patients, QoL and presenteeism differed significantly between physical therapists who reported pain and those who did not (P < 0.05). QoL showed a negative correlation with the work-related musculoskeletal pain (P < 0.01) and presenteeism (P < 0.01), while the presenteeism and work-related musculoskeletal pain showed positive one(P < 0.01). Factors influencing a physical therapist's QoL included presenteeism, Working venues (Convalescent hospital), Work status (Contra ct worker) and professional experience, while the presenteeism included QoL, work status (Intern), PRS, working venues (Convalescent hospital), Area of specialty (Pediatrics), age, sex and working hour. Conclusions: Results show that physical therapists appear to be at a higher risk for work-related musculoskeletal pain. Therefore, administrators need to use the intervention strategies to manage the presenteeism and QoL of physical therapists.

• 한국산업보건학회지
• /
• 제22권3호
• /
• pp.244-256
• /
• 2012

Objectives: This study was conducted to assess the level of depression and its association with sociodemographic characteristics and health related characteristics, job-related characteristics, sleep quality, occupational stress among manufacturing male immigrant worker in Korea. Methods: Total number of subject were 287 workers employed in 19 manufacturing industry. A structured self-administered questionnaire was used to assess each responder's sociodemographic and health related characteristics, job-related characteristics, sleep quality (PSQI), Korean occupational stress (KOSS), Depression (CES-D). The job stress questionna ire was used according to KOSS-26 and depression symptoms were measured using CES-D, which was translated into Korean. We used multiple logistic regression analysis to assess the relationship between risk factors included job stress, sleep quality and depression. Results: The prevalence of depression in survey subjects was 63.9%and poor group (PSQI) (5 point and over at PSQI score)among all subjects were 83.28%. Adjusting for confounding factor, higher the occupational stress (KOSS), depression levels were significantly higher (${\beta}=0.5575$), worse quality of sleep, the more depressed the level was slightly high ${\beta}=0.118$) did not reach statistical significance. Conclusions: The prevalence of depressive symptoms among the study subjects was higher than that among the Korean workers. Especially, the level of depression was more influenced by occupational stress than quality of sleep. Therefore, the author recommend to prepare the effective strategy for reducing the depression and also reducing the occupational stress among immigrant male workers, and the author consider that it need to support the convenient working environment such as consultation for difficulty or health care among immigrant male workers.

• 한국산업보건학회지
• /
• 제28권3호
• /
• pp.319-329
• /
• 2018

Objectives: The object of this paper is to analyze difference of general and occupational characters, risk exposure and ill health symptom depending on the special type of employment. Methods: 50,007 participants from Fourth Korean Working Condition Survey conducted in 2014 was analyzed. Cross-tabulation analysis was conducted for deriving difference in general and occupational characters, mulitvariate logistic regression analysis was conducted after controlling general and occupational characters for deriving difference in risk exposure and ill health symptom depending on the special type of employment. Results: In the special type of employment, female, ages of 50, education levels of high school, monthly income of 2,000-3,000 thousand won, job types of sales person, enterprises of less than 100 workers, working duration of 2-10 years and long working hours worker's proportion was higher than general employment. Physical(OR: 0.84, 95% CI: 0.76-0.94) and ergonomic (OR: 0.48, 95% CI: 0.42-0.55) risk exposure was lower, psychological(OR: 1.77, 95% CI: 1.54-2.04) risk exposure was higher than general employment, and there was no significant difference between the special type of employment and general employment in chemical/biological risk exposure(OR: 1.06, 95% CI: 0.94-1.20) and ill health symptom(OR: 0.98, 95% CI: 0.89-1.09). Conclusions: This article offers the analysing difference between the special type of employment and general employment using huge size cross sectional data represent Korean employees.

• 대한불안의학회지
• /
• 제6권1호
• /
• pp.65-70
• /
• 2010

Objectives : Indirect contact with trauma may occur when a person empathically listens to detailed descriptions, exposing the person to intense emotional pain from trauma victims. Although less severe than direct trauma, indirectly traumatized persons may experience the same fear, rage, and despair as direct trauma victims. This phenomenon has been variously termed vicarious trauma, traumatic countertransference, burnout, compassion fatigue, and secondary traumatic stress. Using a psychiatric symptoms questionnaires, this study investigated the effects of indirect exposure to co-worker's trauma on the mental health of firefighters who had not directly experienced traumatic events in the previous year. Methods : We administered self-report questionnaires, such as the Impact of Event Scale-Revised (IESR) and Alcohol Use Disorder Identification Test (AUDIT), to firefighters working at two fire stations in a metropolitan city. We analyzed 188 of 232 collected surveys, after excluding falsely entered data (28 cases) and questionnaires by directly-traumatized victims (16 cases). Results : Alcohol consumption and posttraumatic stress disorder (PTSD) symptoms, as determined by the AUDIT and IES-R, were significantly higher in the indirectly-traumatized group. The ratio of high-risk members scoring higher than 23 in IES-R was larger in the indirectly traumatized group, although this was not statistically significant. Conclusion : Alcohol consumption was significantly higher in the indirectly traumatized group. This group also included more members at high risk for PTSD. Further research, with a larger group of indirectly traumatized firefighters and ongoing investigation of PTSD development and other psychiatric symptoms, is needed.

• 한국산업융합학회 논문집
• /
• 제22권5호
• /
• pp.529-536
• /
• 2019

Recently, various efforts have been tried in the construction industry to improve productivity by applying the fourth industrial revolution technology. Among the various technologies, researches for the automation and digitization of earthworks are being carried out steadily. As the interest in the benefits of digitalization of the earthwork field has increased, there have been more cases of technology development and application for digitalization of the earthwork field. However, there is not enough case study to present the analysis results of application cases. The purpose of this study is to verify the feasibility of applying the digitization technology of the earthwork in actual worksite. In order to digitize the worksite terrain, it is required the process of field measurement, measurement data registration, earthwork information input, and analysis cell generation. Particularly, it is possible to achieve information-enabled digitization rather than digitalizing only the shape through the input of the earthwork information and the analysis cell generation. By using the digital information of the earthwork field, it is possible to visually recognize the change of the earthwork field, so that it is expected to enhance the worker 's understanding and to be highly applicable to the management work. It is expected that the digital technology of earthwork site will be able to know the precise amount of volume change of the earthwork numerically, and it will be highly applicable to construction management.

• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.310-321
• /
• 2019

Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.

• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.336-342
• /
• 2019

Introduction: An unexpected death was reported in a beginner immediately after starting the work at a plating factory. After the incident, air sampling was performed using a simulation of the situation as it had been at the time. Methods: To evaluate the airborne concentration of hydrogen cyanide, a total of six samples were collected: one personal sample, three area samples, and two background samples (office and outdoors). Hydrogen cyanide measurement was performed according to the standard sampling protocol recommended by the U.S. NIOSH (National Institute of Occupational Safety and Health). Results: The highest concentration of hydrogen cyanide was 0.938 ppm measured in a sample collected from the plating bath area with local exhaust ventilation. This value was approximately 20% of the ceiling occupational exposure limit. The personal sample showed a concentration of 0.135 ppm. Samples collected near the bath in which the incident occurred and a dehydrator showed hydrogen cyanide concentrations of 0.236 ppm and 0.101 ppm, respectively. Hydrogen cyanide was not detected in the background samples (office and outdoors). Conclusions: It is necessary to use proper ventilation systems and respirators in plating factories to prevent acute poisoning. Furthermore, it is important to educate and train new workers dealing with toxic substances.

• 해양환경안전학회지
• /
• 제12권3호
• /
• pp.193-199
• /
• 2006

선박에서 선내 소음이 문제로 인식되기 시작한 시기는 1970년대 초반 유럽에서 선박소음규제를 명문화하기 시작하였다. 이후 1982년 국제해사기구(IMO)에서 "International Code on Noise Levels on Board Ships"가 채택되어 오늘날에는 거의 모든 신조 선박에 대하여 해당하는 조항의 적용이 명문화되었다. 특히, 대형의 디젤기관과 다수의 보조기계가 동시에 운전되어지는 기관실 내부는 크고 복잡한 소음이 발생하는 환경으로 되어지고, 이러한 환경에서 작업하는 작업자는 소음성난청으로 되기 쉽다. 최근에는 각 나라별로 직업상의 난청으로부터 작업자를 보호할 목적으로 허용소음 폭로 시간을 법적으로 규제하고 있다. 우리나라에서는 근로기준법에서 정의하고 있지만 선박의 기관실과같이 특수한 조건에 대해서 국제해사기구의 규정에 따르고 있다. 본 논문에서는 국내 서남 연안을 정기적으로 운항하고 있는 화객선에 대한 소음의 정도를 조사하였다