• International Journal of Industrial Entomology and Biomaterials
• /
• 제46권2호
• /
• pp.34-40
• /
• 2023

As agricultural production increases due to population growth, agricultural by-products that are generated at all production stages increase commensurately. Black soldier fly (BSF) (Hermetia illucens) treatment has potential as an environmentally friendly process to combat the environmental pollution caused by agricultural by-products. This study examined the utilization of BSF larvae in the decomposition of the by-products of apples and mandarins, fruits commonly produced in South Korea. The BSF test larvae were fed apple pomace or mandarin waste, and the control larvae were fed calf feed. Larval weight and size were measured at 4-day intervals until larvae reached the pre-pupal stage. Larval development time, survival rate, and BSF fecundity rate were calculated for all three substrates. Waste reduction and bioconversion ratios were also calculated. The developmental time of larvae fed with apple pomace and mandarin waste was greater than that of the control larvae. The average weight of larvae fed with the fruit by-products was less than that of the control. There was no significant difference in the survival rate of BSF larvae or the fecundity rate of BSF between the substrates used in this study. BSF larvae decomposed 48.0% and 61.5% of apple pomace and mandarin waste, respectively. The bioconversion efficiency rates of BSF larvae fed with apple pomace and mandarin waste were 9.1% and 12.1%, respectively. These results indicated that decomposition of single fruit by-products by BSF larvae is an environmentally friendly and effective bioconversion process.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.234-241
• /
• 2010

사업장 가연성폐기물은 그 자체의 높은 발열량(3,000kcal/kg 이상)으로 인해 고형연료 원료로 매우 유용하게 사용할 수 있다. 현재 국내 대부분의 고형연료 제조업체는 제조가 쉽고 발열량이 높은 필름류 플라스틱을 주로 사용하고 있기 때문에 본 연구에서는 보다 다양한 폐기물을 이용하여 고형연료 제조 가능성을 알아보았다. 실험에 사용된 폐기물 중에서 폐합성수지, 폐타이어로 제조된 고형연료는 발열량이 6,000kcal/kg 이상을 나타내었으며 폐지, 폐목재가 혼합될 경우 발열량은 감소하였다.

• 유기물자원화
• /
• 제17권3호
• /
• pp.91-99
• /
• 2009

본 연구에서는 하수슬러지와 사업장폐기물의 혼합소각을 위한 폐기물특성 및 운전특성을 살펴보고 향후 하수슬러지와 사업장폐기물의 혼합소각에 관한 기초자료를 제시하고자 하였다. 본 사업장폐기물은 플라스틱류가 42.55% 로 종이류(11.92%) 보다 3배 이상의 조성을 나타내었다. 하수슬러지와 사업장폐기물을 부피비로 3 : 7로 혼합한 폐기물의 삼성분은 수분함량이 16.3%, 가연분과 회분 함량은 각각 70.5%와 13.2%을 나타내었으며, 습윤저위발열량도 4,513kcal/kg으로 함수율 15%인 하수슬러지와 사업장폐기물(플라스틱류 약 43% 및 종이류 약 12% 함유)의 3 : 7 혼합소각이 가능할 것으로 예상된다. 혼합폐기물을 $700^{\circ}C$로 소각할 경우 SOx와 NOx 농도는 최소화할 수 있었으 나 다이옥신 등 유해가스 발생면에서 볼 때 $950^{\circ}C$로 소각하는 것이 더 바람직할 것으로 사료되며, 이를 위해서는 $Ca(OH)_2$의 적정사용이 검토되어야 할 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3761-3767
• /
• 2009

산업단지에서 발생하는 액상폐기물(폐유와 폐유기용제)을 고온반응기에서(온도 $1,250{\sim}1,400^{\circ}C$, 압력 1기압) 연소시키면서 연소 특성, 유해물질 분해정도 및 연소 후 배출가스 특성 등을 살펴보았다. 산소와 폐기물의 질량비($O_2$/waste mass fraction)가 1.53 이하로 줄어들 때 반응기는 산화분위기에서 환원분위기로 전환되었고 연소 후 배출가스는 NOx 배출량이 감소하고 합성가스의 발생비율이 증가하였으며 BTEX류는 99.99%이상 분해되는 것으로 나타났다. 본 연구에서 제안한 시스템 및 조업조건 하에서 고농도의 액상폐기물(폐유와 폐유기용제)을 처리한 결과 미량 오염물질의 배출농도는 매우 낮은 값을 보여 액상폐기물의 처리에 적합한 것으로 판단되며 또한 연소 후 합성가스도연료로 활용할 수 있을 것으로 사료된다.

• 한국환경과학회지
• /
• 제16권11호
• /
• pp.1225-1230
• /
• 2007

The emissions characteristics of particulate matters(PM) according to the types of wastes from industrial waste incinerator of 800 kg/hr treatment capacity were investigated. For this study, the incinerate waste are as follows; waste resin, waste wood, waste urethane, waste gunny, and waste paper. The particulate samples were collected to be emitted in stack and air pollution control(both cyclone and bag filter). In stack, the concentrations of PM were in the range of 2.61 to $26.51 mg/Sm^3$ and the major chemical species were C, Si, Cl, K, Na, Ca in all the wastes. In cyclone fly ash, the mean content of heavy metal were in the order of Fe > Zn > Pb > Cu > Mn > Cr > Ni > Cd > As > Hg and the heavy metal content of waste resin were Zn 34,197.5 mg/kg, Fe 27,587.6 mg/kg, Pb 6,055.8 mg/kg, respectively. In bag filter fly ash, the mean content of heavy metal were in the order of Zn > Pb > Fe > Cu > Mn > Cd > Cr > Ni > As > Hg and the heavy metal content of waste wood were Pb 36,405.2 mg/kg, Fe 15,762.9 mg/kg, Cu 9,989.5 mg/kg, Cd 2,230.1 mg/kg, respectively. Comparing the heavy metal content of both cyclone and bag filter, in cyclone, the Cr, Fe, Ni content were higher than in bag filter and the Cd, Cu, Hg content were lower than in bag filter.

• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2786-2793
• /
• 2009

최근 화석에너지 고갈과 환경규제 강화로 신 재생에너지 개발 및 보급이 시급해지고 있다. 여러 가지 신재생 에너지 중 폐기물을 이용하는 방법이 에너지원의 잠재적 가치를 비교하였을 때 가장 유망한 에너지원으로 인정되고 있으며, 그 중에서도 폐기물을 고체연료로 가공하는 고형연료가 현실적이고 가장 경제적인 방법으로 인정받고 있다. 그러나 산업폐기물의 종류별 연소 시 발생되는 유해가스(HCl, Dioxin 등)와 중금속 등이 문제점으로 지적되고 있다. PVC, alkali metal chloride, alkaline earth metal chloride 등은 Cl을 발생시키는 대표적 물질이며, Cl는 열회수 장치의 부식과 같은 문제를 유발한다. 본 연구에는 두지역의 산업단지에서 고형연료의 재료가 되는 산업폐기물에 미량 존재하는 중금속 성분을 분석하였으며, Cl과 S의 농도를 분석한 결과 B산업단지의 농도가 A산업단지의 농도보다 약간 높게 나타났다. 이를 바탕으로 산업폐기물의 발생원과 연료로서의 RDF의 성능을 개선하기 위한 기초자료로 활용될 수 있을 것으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.47-48
• /
• 2023

In the domestic industrial sector, greenhouse gases emitted from the cement industry account for about 10%, with most of them generated during the cement clinker calcination process. During the calcination process, 57% of carbon dioxide is emitted from the decarbonation reaction of limestone, 30% from fuel consumption, and 13% from electricity usage. In response to these issues, the cement industry is making efforts to reduce carbon dioxide emissions by developing technologies for raw material substitution and conversion, improving process efficiency by utilizing low-carbon alternative heat sources, developing CO₂ capture and utilization technologies, and recycling waste materials. In addition, due to the limitations in purchasing and storing industrial byproducts generated from industrial facilities, many studies are underway regarding the recycling of construction waste. Therefore, this study analyzes the manufacture of calcium silicate cement (CSC), which can store carbon dioxide as carbonate minerals in industrial facilities, and aims to contribute to the development of environmentally friendly regenerated cement using construction waste.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1544-1551
• /
• 2024

A unique brick series based on Vietnamese clay was manufactured at 114.22 MPa pressure rate for γ-ray attenuation purposes, consisting of (x) metallic waste & (90%-x) red clay mineral & 10% (hardener mixed with epoxy resin), where (x) is equal to the values 0%, 20%, 40%, 50%, and 70%. The impacts of industrial metal waste ratio in the structure and radiation protective characteristics were evaluated experimentally. The increase in metallic waste doping concentrations from 0% to 70% was associated with an increase in the manufactured brick's density (ρ) from 2.103 to 2.256 g/cm³ while the fabricated samples' porosity (Φ) decreased from 11.7 to 1.0%, respectively. Together with a rise in fabricated brick's density and a decrease in their porosities, the manufactured bricks' γ-ray attenuation capacities improved. The measured linear attenuation coefficient (μ, cm^-1) was improved by 30.8%, 22.1%, 21.6%, and 19.7%, at E_γ equal to the values respectively 0.662, 1.173, 1.252, and 1.332 MeV, when the metallic waste concentration increased from 0% to 70%, respectively. The study demonstrates that manufactured bricks exhibit superior radiation shielding properties, with radiation protection efficiencies of 88.4%, 90.0%, 91.7%, 92.1%, and 92.4% for bricks with industrial metal waste contents of 0%, 20%, 40%, 50%, and 70%, respectively, at γ-ray energy (E_γ) of 1.332 MeV.

• 산업기술연구
• /
• 제17권
• /
• pp.169-174
• /
• 1997

This investigation was carried out to study on the generation property, management and seperate collection rate of solid waste in the Gu-Gok Falls. Generation rate of solid waste was 80.785kg/day and unit waste generation rates was $65.55g/day{\cdot}tourist$ one person. Physical component of solid waste were garbage 46%, papers 20%, empty bottles 10%, respectively. A plan is required to decrease generation rate of garbage waste. As result to investigate separated garbage can, papers and can were separated more than 60%. But empty bottles and scrap iron were separated less than 50%. P.E.T, steel can, aluminum can and empty bottles were 20% of total generation rate, and profit of reuse is \700,800/year.

• 청정기술
• /
• 제2권2호
• /
• pp.51-59
• /
• 1996

Billions of tons of industrial waste are generated annually in industrialized countries. Managing and legally disposing of these wastes costs tens to hundreds of billions of dollars each year, and these costs have been increasing rapidly. The escalation is likely to continue as emission standards become even more stringent around the world. In the face of these rapidly rising costs and rapidly increasing performance standards, traditional end-of-pipe approaches to waste management have become less attractive. The most economical waste management alternatives in many cases have become recycling of the waste or the redesign of chemical processes and products so that wastes are prevented or put to productive use. These strategies of recycling or reducing waste at the source have collectively come to be known as pollution prevention. The engineering challenges associated with pollution prevention are substantial. This presentation will categorize the challenges in three levels. At the most macroscopic level, the flow of materials in our industrial economy, from natural resource extraction to consumer product disposal, can be redesigned. Currently, most of our raw materials are virgin natural resources that are used once, then discarded. Studies in what has come to be called industrial ecology examine the material efficiency of large-scale industrial systems and attempt to improve that efficiency. A second level of engineering challenges is found at the scale of individual industrial facilities, where chemical processes and products can be redesigned so that waste is reduced. Finally, on a molecular level, chemical synthesis pathways, combustion reaction pathways, and other material fabrication procedures can be redesigned to reduce emissions of pollution and unwanted by-products. All of these design activities, shown in Figure 1, have the potential to prevent pollution. All involve the tools of engineering, and in particular, chemical engineering.