• 한국항해학회지
• /
• 제17권3호
• /
• pp.57-68
• /
• 1993

The economy of Korea has grown up significantly in its scale. It has, therefore, become imperative to develop countermeasures to prevent work related injuries and occupational illnesses resultining from haza-rdous working conditions and handling harmful substances. A lot of cargo handling accident in port have occurred due to the characteristics of poor working environment, diversity of working place and method, fluctuation of the amount of cargo and handling of heavy, long, harmful and dangerous cargo, etc. According to '91 industrial accident analysis carried out by the ministry of labour, the number of the stevedores injured by cargo handling accident in port were 1, 432 persons (the death accident : 22 per-sons), the amount of industrial accident compensation in port was 6.7 billion won (the amount of economic loss : 33.6 billion won), and the injury occurance rate of the stevedoring industry was higher than that of the whole industry. This paper, therefore, aims to the actual status of the stevedoring industry and to extract the main cau-ses of the accidents related to cargo handling in port through factor analysis using the data of the accide-nts in the whole habour from 1990 to 1992, and to suggest the countermeasures to prevent such accident. The main causes of the accident and countermeasures are found to be as follows through the factor analy-sis : Factor1, factor2, and factor3 related to a defect of human being and management, a defect of state and environment, and an insufficiency of education and law are extracted. The short-term countermeasures to prevent these accidents are 1) to consolidate the safety and health organization in the working spot, 2) to secure a safe condition in working spot before dock work, 3) to strengthen a dock worker's safety educa-tion. The long-term countermeasures are 1) to promote a decasualisation of dock workers, 2) to modernize the cargo working methods through constructing exclusive pier and introducing exclusive cargo handling equipment, 3) to establish a exclusive dock accident prevention organization and the dock workers law. Factor 4, factor5, factor6, and factor7 related to an unfitness, a deficiency of technical knowledge, a nonfu-lfilment of safety measures, and a bad arrangement are extracted. The countermeasures to prevent these accidents are 1) to perform a complete safety inspection of cargo handling equipments and tools and to carry out the dock work according to a working plan, 2) to publish and supply technical safety books, safety instruction book, safety check list, etc., 3) to strengthen the safety patrol at the working spot in habour and to activate a safety fund, 4) to maintain always a clean workshop with the safety consciousness in which the good arragement of the working spot is considered to be the beginning of safety.

• 한국안전학회지
• /
• 제34권3호
• /
• pp.83-88
• /
• 2019

The 7,993 cases of Survey Report of Fatal Industrial Accidents conducted jointly by the MEOL and the KOSHA for the recent seven years(2007-2013) were categorized according to personal and occupational characteristics, industry types, business sizes, job types, activities at the time accident, types of accidents, material agents(assailing materials), unsafe conditions, and unsafe acts. And it is found that among the 72.2 percent of fatal occupational accidents in the construction and manufacturing industries are caused by falling, sticking, bumping and being caught under objects & overturning. For this study, through the empirical analysis on causes of fatal industrial accidents, was used to identity high risk groups based on total data of 7,993 victims of occupational accidents. An annual fatal occupational injury (FOI) rate per 10,000 workers was about 0.47‱. The middle-aged group and the elderly group showed the highest FOI rates per 10,000 workers (0.73‱, 0.80‱), and the daily workers showed the highest FOI rate (1.46‱), and the craft and related trades workers showed the highest FOI rate (2.17‱). In case of industry type the mining industry (7.26‱) showed the highest FOI rate, followed by the sewerage, waste management, materials recovery and remediation activity industry (3.91‱) and the construction industry (2.71‱). The primary high risk target group that requires a strategy designed to reduce fatal occupation injuries caused by falling and bumping & contact(collision) is the construction industry, and the secondary high risk target group in the construction industry is classified as the equipment, machine operating and assembling workers in the construction industry, those aged 50 years old and above need the prevention measures against bumping & contact(collision) and being caught under an object & falling(objects), while those aged less than 50 years old need prevention measures against falling(persons).

• 한국산업보건학회지
• /
• 제24권2호
• /
• pp.229-237
• /
• 2014

Objectives: This study intends to determine the current status of management of personal protective equipment fume hoods in university laboratories. Methods: A walk-through survey of 402 labs in Gyeongbuk Province and Daegu Metropolitan City were carried out between May 2009 and July 2010. Respectively, 348 and 54 laboratories were examined in Gyeongbuk Province and Daegu. Results: In size, labs serving over 15,000 student made up the majority with 276(66.4%). In terms of major, engineering labs were the highest in number with 100(24.9%). As to personal protective equipment, a gas mask and a dust mask were available in 17.8% and 14.3% of the labs, respectively, but 68.9% of labs were equipped with protective goggles. Meanwhile, only 12.7% of labs had separate protective equipment storage boxes. About 60% of the labs had installed a fume hood, of which the average capture velocity was 0.37 m/sec. Conclusions: For toxic substances, the labs are obliged to provide personal protective equipment in in accordance with the Occupational Safety and Health Act. In addition, the capture velocity of fume hoods must be in strict compliance in order to prevent occupational diseases due to toxic chemicals.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.856-863
• /
• 2009

The problem of urban decay in Hong Kong has drawn much attention of both practitioners and academics. Poorly managed buildings not just give a negative image to the Pearl of the Orient in the region, but also pose potential risk hazards to the health and safety of the general public. While it is necessary to devise a comprehensive plan on redevelopment and urban planning, preserving the existing buildings to maintain their conditions for habitation can be a short-term option to safeguard quality standard. With the increasing number of ageing buildings in Hong Kong, a lot of research efforts have been devoted to managing repair and maintenance projects properly (for example those initiated and funded by the Construction Industry Institute, Hong Kong; and the current study financially supported by The Hong Kong Polytechnic University). Given the short duration and more diversified nature of work, building repair and maintenance works are found to be more difficult to monitor and regulate when compared with new works. This paper aims to provide a comprehensive analysis on the problems of running building maintenance projects. An extensive review of contemporary literature was firstly conducted, which forms a solid basis for developing an empirical study on the problems and difficulties of running building maintenance projects from the viewpoints of industrial practitioners with a view to formulating effective strategies for managing maintenance projects successfully.

• 한국산업보건학회지
• /
• 제28권2호
• /
• pp.144-150
• /
• 2018

Objectives: The purpose of this study is to analyze the trend for exceedance of the domestic permissible exposure limit of benzene based on a review of the previous literature. Materials and methods: From among 13 chemical substances regulated through a PEL (Permissible Exposure Limit) in the Occupational Safety and Health Act, the research object of this study is benzene. The information utilized is work environment measurement data from 2004 to 2013. The highest level among the concentration data measured at various workplaces was selected as a representative value through the data process. N.D. (Not Detected) data was considered as 1/2 of the LOD (limit of detection). Results: Among the work environment measurement data between 2004 and 2013, the highest number of exceeding workplaces and the excess rate (12 sites and 5.4%) was observed in the 2006 data when applying the current PEL for benzene. When compared with the action level, which means a level one-half of the PEL, 2005's data showed the highest number of exceeding workplaces and greatest excess rate (89 sites & 13.3%). The number of exceeding workplaces and excess rate relative to the PEL for benzene showed an increasing trend in 2004, but tended to decrease after 2007. Conclusions: Based on the results obtained from this study, the exposure level for benzene among domestic workers is not considered to be in a safe phase regardless of the year of work environment measurement. Thus, strict preventive management in workplaces should be provided for reducing exposure to benzene.

• Journal of Preventive Medicine and Public Health
• /
• 제32권1호
• /
• pp.30-39
• /
• 1999

이 연구는 특수건강진단기관의 소음성 난청 진단결과의 유소견자$(D_1)$와 요관찰자(C)를 하나의 평가 지표로 설정하여, 첫째 소음 특수건강진단 결과 소음성 난청의 실태 파악, 둘째 소음성 난청 요관찰 자의 청력장애 평가, 셋째 정력장애 정도 에 따른 각 주파수 영역별 기도순음청력 검사 결과를 통해 청력손실의 정도를 파악하고 이의 판정기준에 따른 진단의 적정성을 검토하고자 하였다. 1. 1994년 l월부터 12월까지의 73개 특수건강진단기관의 특수건강진단 실시 사업장은 27,347개이며 이중 소음 특수 건강진단 설시 사업장은 16,388개(59.9%)이었으며, 전체 특수건강진단 수진 근로자는 731,029명이며 이중 소음 특수 건강진단 수진 근로자는 343,457명 (47.0%)이었다. 소음성 난청 요관찰자는 38,058명, 소음성 난청 유소견자는 1,358 명으로 소음성 난청 요관찰률은 11.1%, 유소견율은 0.44%이었다. 지역에 따라 소음성 난청 요관찰률의 차이를 보여주며 판정기준의 적용에 따른 기도순음 청력평균손실치가 일부 적정하게 판단되지 못하였음을 보여 주었다. 2. ISO 기준의 3분법에 의한 청력 평가시 97%가 경도난청 이하였으며, 회화음 역에서의 4분법에 비해 거의 비슷하였으나 약간 정상역이 많았고, 고음역을 포함하여 평가하는 4분법과 6분법의 적용시 정상자의 경도난청으로의 가능성이 높다고 볼 수 있어 청력평가시 평가방법의 적용에 따라 내재적인 판별능의 차이를 보여준다고 볼 수 있다. 3. 우측귀의 청력역치를 ISO 기준에 의해 평가한 후 양귀의 청력역치의 분포 및 차이를 보면, 우측귀의 평균역치(표준편차)가 20.54(9.56) dB, 좌측귀의 평균역치가 20.54(9.57) dB로 좌측귀의 평균역치가 우측보다 높았다. 양귀의 청력이 75.4%에서 정상역이었으며, 21,562명 (90.6%)의 양귀 청력역치 차이의 범위가 10dB이내였다. 4. 소음성 난청 요관찰자의 회화음역에 속하는 500, 1,000 및 2,000 Hz에서의 기도청력역치를 산술평균으로 하여 구하는 3분법의 청력손실도(표준편차)를 주파수 별로 보면, 우측귀에서 500 Hz 21.08(10.23), 1,000 Hz 18.44(10.01), 2,000 Hz 22.09(13.46), 4,000 Hz 52.36(16.38) dB이었다. 평균청력손실도를 10 dB 간격으로 구분한 후 각각의 주파수별 청력역치를 살펴보면, 정상역인 20 dB미만에서 고음역인 4,000 Hz에서 회화음역인 500, 1,000 및 2,000 Hz에서 보다 평균 30-40 dB 이상의 역치를 보이는 $C_5-dip$ 현상을 특징적으로 보였다. 평균정력손질이 증가함에 따라 4,000 Hz에서의 역치 증가 현상이 점차적으로 감소하다 평균청력손실이 50 dB 이상에서는 10dB 내외의 차이만을 나타내었다. 이상과 같이 소음성 난청 요관찰자에 대한 분석에서 소음성 난청의 평가방법 에 따른 실태와 의미, 소음에 의한 조기청력손실의 특정과 소음성 난청의 판정기준에 따른 진단의 적정성을 확인할 수 있었으며, 소음성 난청 요관찰자에 대한 관리의 필요성을 제언할 수 있겠다.

• 지역사회간호학회지
• /
• 제4권1호
• /
• pp.58-66
• /
• 1993

The purpose of this study was to explore the condition of periodic medical examination, and health care services in industries. This will offer some basic data in developing industrial nursing care requirements. To achieve this goal a self-administered questionnaire (developed by the academic affairs of community health nursing) was provided to the nurses working in 40 industries from Dec 20, 1992 to Jan 20, 1993. The statistical computer package SAS, along with t-test, and ANOVA was used to manipulate the date. The results were as follows : 1. General Characteristics: The greater part of the industries studied were manufacturing company, with over 500 employees. The shift system was used with most companies using one or three shifts, and 75.0% of them were organized with Industrial Safety and Health Committees. 2. Periodic Medical Examination : Most of the workers were receiving periodic medical examination from a designated hospital (96.7%). Of those 15.8% had a close medical examination. In the medical examination 9.4% were evaluated at 'C' and 3.8 were evaluated at 'D'. About 55.0% of those workers received the result of the periodic medical examination individually(95.0%). 3. Special Medical Examination : The rate of those who were receiving special medical examination was 98.4% and about 11.7% were evaluated at 'C' and 3.9% were evaluated at 'D'. Those who had any health problems (54.2%) were receiving follow-up care, 52.4% of them had medical treatment while working. The health care managers in the company consulted 97.1% of them who had any suspicious signs and symptoms of occupational diseases. 4. Health Care Services : The average score of health care services was 13.8 out of a possible 28 point. The score of health education and health assessment, was lower than medical diagnosis and environmental hygiene. There were no significant differences in health care services according to the size of the industries(F=.95, P=.429). The score of health care services was higher in the worker who had better health and showed significant differences (F=4.50, p=.025).

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.411-420
• /
• 2018

본 연구는 종합병원 의료인의 교육훈련 인식이 의료인 상호간 커뮤니케이션에 미치는 영향을 파악하기 위한 목적으로 수행된 연구이다. 자료조사는 광주광역시, 전라남도 소재 29개 종합병원에서 근무하는 의료인 433명을 대상으로 2018년 6월 8일부터 2018년 6월 25일까지 자료를 수집하였다. 자료 분석은 t-검정과 분산분석, 사후검정, 상관관계 및 단계적 회귀분석을 실시하였다. 연구결과 인구사회학적 특성 및 건강관련 특성과 의료인 상호간 커뮤니케이션 차이를 검정한 결과 연령, 학력, 병상규모, 직업만족도, 소재지, 건강상태, 건강관리 교육경험, 우울경험에서, 교육훈련 인식은 연령, 병상규모, 직종, 급여수준, 의료기관 종류, 직업만족도, 소재지, 건강상태, 건강관리 교육경험, 만성질환 여부에서 통계적으로 유의한 차이가 있었다. 의료인 상호간의 커뮤니케이션에 미치는 영향 요인으로 학력, 건강관련 교육경험에서 긍정적인 영향을 미쳤고, 연령과 병상규모(801병상 이상), 직업만족도에서는 연령이 높을수록, 병상규모가 801병상 이상인 경우, 직업에 만족하지 못할수록 부정적인 영향을 미쳤으며, 교육훈련 하부요인인 지원환경, 학습전이, 성과에서 영향을 미쳤다. 이러한 연구를 바탕으로 교육훈련 계획수립 시 성과와 지원환경, 학습전이를 높일 수 있는 교육훈련 프로그램 구축이 필요하며, 의학 및 간호학생들의 교육 과정에 커뮤니케이션의 정규 교육과정을 도입. 의료인 상호간 커뮤니케이션을 높여 환자에게 안전한 의료서비스를 제공해야 할 것이다.

• 한국산업보건학회지
• /
• 제9권1호
• /
• pp.125-155
• /
• 1999

The objectives of this study were (1) an investigation of the current status of the hazardous substances, (2) a comparative analysis of classification system of hazardous substances between Korea and other countries, (3) a development of the new classification system in Korea, finally a review of prerequisites for effective enforcement of the new system. The results are summarized as follows : 1) The backbone of classification system of hazardous substances in Korea is based on Japanese classification system and EC(European Committee) guideline of hazardous substance. There are many problems in managing and handling of hazardous substances due to discordant of Japanese and EC system. It is desirable to revise the classification system to be harmonized with international guideline for example, guideline of IFCS(The Inter-governmental Forum on Chemical Safety) and EC guideline. 2) There are several problems in definitions of corrosive, sensitizing and irritation in MSDS Code of Ministry of Labour. It is desirable to reform those definitions. 3) Among the hazardous substances under the current system, there are several substances such as, beta-propiolactone, methyl bromide, ethyleneimine, etc that are not used and produced in Korea. It is desirable to exclude the substances from the list of controlled substances. 4) The section 39, about 'substance that designated to attach warning label' in Korea Occupational Safety and Health Act(OSHAct) should be eliminated, because above section is unnecessary under the MSDS system. 5) The researchers recommend to establish a new list of hazardous substance which are controlled by OSHAct. It is desirable that the new list is consist of two types. The first type is 'a list of the specially controlled substances' and the other is 'the generally controlled substances'. 6) It is recommended that the specially controlled substances should include hazardous substances that are highly toxic and widely used in Korea. And the generally controlled substances should include hazardous substances that can be analysed by instrument and carry threshold. limit values(TLV's).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.654-656
• /
• 2001

This research used triac that is semi-conductor that act to static contact to overcome happened shortcoming been using mechanical centrifugal force switch usually Detect starting current of single phase induction motor and decided moving time. Therefore, could improve life of switch semipermanently. Also, wish to reduced impact that electric motor suffers at the starting moment and do stable starting which there is no life improvement and noise of electric motor itself, arc.