• 건축역사연구
• /
• 제23권2호
• /
• pp.7-24
• /
• 2014

The purpose of this research is to clarify the valuable industrial heritages of rice mill industry complex remained in Incheon. In order to clarify the formation of integrated historical setting of rice mill industry of Incheon, we analyzed the old map of Incheon's old Jemulpo area and data on address, locations and happenings surrounding rice mill factories and relevant facilities. From here, we could find out the 4 representative rice mill industry area of integrated historical setting and 2 other supporting service area for rice mill industry in old city center of Incheon. Specifically, we could figure out the incremental stages to establish the rice mill industry in Incheon. In the first stage, the rice mill factories were established near foreign settlement area where trading offices and warehouses were equipped. And the second stage reflect the needs of expanding area for Japanese capitalism with the new landfill area. In the final stage, Korean rice mill owners established the korean laborers community near Korean residential area. This formation of integrated historical setting reflecting Incheon's rice mill industry is the identical industrial heritages and urban structures to show the tension and conflict between Japanese and Korean laborers' life in the Japanese Colonial Period.

• 한국환경과학회지
• /
• 제5권1호
• /
• pp.7-14
• /
• 1996

Two experiments were conducted to evaluate breathing zone air quality in Taegu, using automatic analyzers for four air quality standards($SO_2$, $NO_2$, CO, and $O_3$). First, air target compounds were measured for 8 to 12 hours in each of two commercial areas and five residential areas. Second, air target compounds were hourly measured for 24 hours in each of two commercial areas, two residential areas, and an industrial complex area. Based on the first experiment the breathing zone air was more polluted in the commercial area as compared to the residential area, while the second experiment showed that the breathing zone air was polluted rather in the residential are3 as compared to the commercial area. The second experiment also indicated that there was some variation of breathing zone air concentration with time and measuring sites. Diurnal variation of breathing zone air concentrations was consistent with previous studies which measured at building height. The highest breathing zone air concentration was shown in Seongseo industrial complex area. An unusual finding of this study was that $SO_2$ concentration in the breathing zone air of Bisandong, a typical residential area of Taegu, was higher than that of other residential areas, even higher than that of Seongseo industrial complex area.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권2호
• /
• pp.87-91
• /
• 2003

본 연구는 산업시설에서 배출되는 대기오염물질이 인접한 주거지역에 영향을 미칠 것으로 예상되는 시화공업단지 주변의 공단지역, 주거지역 및 녹지지역의 토양을 대상으로 As, Cd, Co, Cr, Cu, Hg, Ni, Pb 및 Zn 함량을 조사하였다. 토양 중 중금속 함량의 범위는 As 0.58~3.81, Cd ND~0.91, Co 0.15~6.33, Cr ND~1.86, Cu 0.14~110.27, Hg ND~l.17, Ni 0.04~10.59, Pb 1.16~86.48 및 Zn 1.83~212.65 mg/kg으로서 전 지역에서 토양환경보전법의 토양오염기준이나 식물독성 유발기준에 비하여 매우 낮은 값을 나타내었다. As 함량은 전 지역에 걸쳐 비슷하였으나, Cd와 Cr 함량은 공단지역이 주거지역이나 녹지지역보다 각각 약 10배 및 5배정도 높았으며, 주거지역과 녹지지역은 비슷한 경향이었다. Co, Cu, Hg, Ni, Pb 및 Zn 함량은 공단지역이 주거지역이나 녹지지역보다 약 2~3배정도 높았으며, 주거지역과 녹지지역은 비슷한 경향이었다.

• 기술혁신학회지
• /
• 제14권3호
• /
• pp.599-621
• /
• 2011

본 연구는 부산 울산 경남의 동남권 지역에 집중되어 위치한 조선 산업에서 산업클러스터의 존재여부를 도출하고 그 위상을 파악하여 앞으로의 정책추진에 있어 주요한 기준을 제시하고자 했다. 이에 본 연구는 입지계수(LQ: location quotient)를 활용한 특화도 분석을 통하여 부산 울산 경남의 동남권지역의 산업클러스터 여부를 실증적으로 확인했다. 이는 산업클러스터의 구체적인 발전전략을 세우기에 앞서 먼저 산업클러스터를 확인하는 작업이 필요하기 때문이다. 분석결과 이 동남권의 입지계수의 값은 1.25보다 작은 결과가 도출되어 이 지역의 조선산업은 아직 특화되지 못했음이 밝혀졌고, 부산 울산 경남지역 각각의 경우도 이러한 과정을 통해 이 지역의 조선 산업이 아직 특화되지 못했음이 분석되었다. 한편 이러한 분석을 통해 앞으로 세 지역 중 어떤 곳과 조선관련 산업 중 어떤 업종이 각각 전국 대비 가장 특화될 가능성이 높은지도 밝혀졌다.

• 한국환경과학회지
• /
• 제16권12호
• /
• pp.1355-1367
• /
• 2007

This study summarizes the relations among $PM_{2.5}$ concentration, water-soluble ions concentration, metallic element Components characteristics and SPSS in negative ion and metallic element of $PM_{2.5}$ particle in Miryang.(By the urban area, the industrial complex area and the suburban area according to the season) $PM_{2.5}$ concentration of total 72 samples collected from 3 sites turned out to range from 3.47 to 34.7 ${\mu}g/m^3$, and the average concentration was the suburban area-the kin nup(16.00 ${\mu}g/m^3$) > the urban area-the roof of the old Miryang university(10.32 ${\mu}g/m^3$) > the industrial complex-Sapo industrial complex(10.29 ${\mu}g/m^3$). In particular, the suburban area had $PM_{2.5}$ concentration 1.5 times those of urban area, industrial complex. It was thought although the site was suburban and farm-side without pollutants around, it had a higher concentration value influenced by external factors including the brickyard, small-scale incinerator, driving range construction, construction on the Daegu-Busan express and the widening of the four-lane road between Miryang-Anyang nearby. As for water-soluble ions among $PM_{2.5}$ particle collected in Miryang area, $SO4_{2^-}$ accounted for 60% and $NO_{3^-}$, was 30% in spring and summer. And $NO_{3^-}$ accounted for 50% and $SO4_{2^-}$ was 35% in fall and winter. The AI value of metallic Components among $PM_{2.5}$ particle collected in Miryang area had a high value influenced by the apartment complex construction and the extension work of road. The industrial complex area had Zn concentration 3 times, and Fe concentration 2 times those of urban area and suburb area. When it comes to the relation with metallic elements in urban area, the highest coefficient of correlation was between Cr-Fe with 0.85, and Pb-Cd turned out in the reverse correlation. Among metallic elements, the coefficients of correlation between Zn and Cr, Mn, Fe, NI were high in industrial complex area. The highest coefficient of correlation was between Mn-Zn with 0.88, meanwhile Ni and Cu, Cd turned out in the reverse correlation in the suburb area. These coefficients of correlation are attributed to the difference in pollutant sources, rather than difference in pollutant and non-pollutant.

• 한국환경과학회지
• /
• 제14권6호
• /
• pp.543-553
• /
• 2005

In recent days, photochemical smog due to the rapid industry development and vehicle increasement has become a critical pollutant in the metropolitan area and the number of ozone alarm signal has increased every year. This research was performed to evaluate VOCs emission source characteristics and concentration of VOCs in Daegu. The site average concentration was observed in the following order: industrial area > commercial area > residential area. Most of the VOCs species except toluene showed variations with higher concentration during nighttime, and lower concentration during the daytime. The major VOCs of stationary emission source were BTEX(benzene, toluene, ethylbenzene. xylene) and methylene chloride, trichloroethene and styrene. Also, those of automobile exhaust were toluene and benzene. Also, the major VOCs concentration emited by the vehicle fuel was observed in the following order: gasoline > light oil > liquefied petroleum gas (L.P.G). Correlation coefficients values were estimated between major VOCs such as toluene, ethylbenzene, m,p-xylene, o-xylene. Results showed that correlation coefficient values were significant magnitude above 0.76. Also, there showed highly significant correlations among ethyl benzene, m,p-xylene, and o-xylene concentration(Pearson correlation coefficients, r=0.868-0.982). Calculated correlation coefficients among commercial area,industrial area and residential area were 0.934-0.981, they showed high correlation. There showed highly correlation between stationary emission source and industrial area, compared with commercial area and residential area. Also, calculated correlation coefficients among commercial area, industrial area, residential area and automobile exhaust were 0.732, 0.725, 0.777, respectively.

• 한국환경과학회지
• /
• 제2권3호
• /
• pp.217-225
• /
• 1993

This study was performed at Sa-Sang Industrial area in Pusan City. To measure the total suspended particulates(T.S.P) and $SO_3$ following places was selected industrial area, down town, residentail area. T.S.P was collected on glass filters by High-Volume Air Sampler, $SO_3$ was measured by PbO2 Candle method. The collected T.S.P was analyzed for various anlon(for example, $NO_3$, $SO_4$, $PO_4$, F, Cl) by ion Chromatography, and Pb by Inductively Coupled Plasma.

• 산업경영시스템학회지
• /
• 제36권4호
• /
• pp.138-145
• /
• 2013

A sweep-based heuristic using common area is developed for multi-vehicle VRPs under time various and unsymmetric forward and backward vehicle moving speed. One depot and 2 delivery vehicle are assumed in this research to make the problem solving strategy simple. A common area is held to make adjustment of possible unbalance of between two vehicle delivery completion times. The 4 time zone heuristic is used to solve for efficient delivery route for each vehicle. The current size of common area needs to be studied for better results, but the suggested problem solving procedures can be expanded for any number of vehicles.

• 대한산업공학회지
• /
• 제27권1호
• /
• pp.54-60
• /
• 2001

In this paper, a shape-based block layout (SBL) approach is presented to solve the facility layout problem with unequal-area and fixed shapes. The SBL approach employs hybrid genetic algorithm (Hybrid-GA) to find a good solution and the concept of bay structure is used. In the typical facility layout problem with unequal area and fixed shapes, the given geometric constraints of unequal-area and fixed shapes are mostly approximated to original shape by aspect ratio. Thus, the layout results require extensive manual revision to create practical layouts and it produces irregular building shapes and too much unusable spaces. Experimental results show that a SBL model is able to produce better solution and to create more practical layouts than those of existing approaches.

• Journal of Preventive Medicine and Public Health
• /
• 제28권3호
• /
• pp.726-733
• /
• 1995

This study was carried out to assess the present level of atmospheric metals. Five metals - lead, cadmium, chromium, manganese, vanadium - were checked on the industrial(Sasang) and residental area(Daeshindong) in the city of Pusan. Sampling period was the year of 1986, 1990 and 1994, and the sampling time was 2 days of each site. As the result of comparison with the atmospheric standard of ASHRAE(1980), the average concentrations of lead was above the standard, the average concentrations of chromium was around the standard, and the average concentrations of cadmium and vanadium was below the standard. The average concentrations of manganese was above the standard of industrial environment. And the average concentrations of five metals was higher in the industrial area than the residental area. The average concentrations of lead, cadmium and chromium showed the increase tendency by the year, and the average concentrations of vanadium showed no change, and the average concentrations of manganese showed the decrease tendency. As a result of correlation analysis, lead and cadmium(r=0.31), vanadium and manganese(r=0.24), vanadium and chromium(r=0.19) showed significance.