• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.4
• /
• pp.198-204
• /
• 2009

Inductive peaking using T-coils has been widely used in broadband I/O interfaces. In this paper, we analyze technical effects and limitations of the T-coil, and discuss several methods that can overcome these restrictions and improve the practicality of the T-coil. In particular we also propose and verify a circuit topology which can further extend bandwidth beyond the limit that conventional T-coil can achieve, and transfer 20 Gb/s data without noticeable distortion.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.6
• /
• pp.495-499
• /
• 2012

Recently, DC distribution systems become hot issues since DC type loads increase rapidly according to the expansion of IT equipment such as computers, servers, and digital devices; DC type loads will cover 50% for all electricity loads in 2020 which was mere 10% in 2000. DC distribution systems are also accelerated by the expansion of renewable power systems since they are easy to be interfaced with DC grids rather than AC grids. However, removing the fault current in DC grids is comparably difficult since the current in DC grids has non zero-crossing point like in AC grids. Thus, developing dedicated DC circuit breakers for DC grids is necessary to get safety for human and electrical facilities. Magnet arc extinguishing method is proper to small size DC circuit breakers. However, simple Magnet arc extinguishing method is not enough to break inductive fault currents. This paper proposed a novel DC circuit breaker against inductive fault current defined by IEEE C37.14-2004 Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures. The performance of the proposed DC circuit breaker was verified by an experimental circuit breaker test system built in this research.

• The Journal of Information Systems
• /
• v.31 no.4
• /
• pp.25-45
• /
• 2022

Purpose In this paper, we propose the method to extend topic modeling techniques in order to derive data-based research hypotheses when establishing research hypotheses for social sciences, As a concept in contrast to the existing deductive hypothesis establishment methodology for the social science research, the topic modeling technique was expanded to enable the so-called inductive hypothesis establishment methodology, and an analysis case of the Seongsan Ilchulbong online review based on the proposed methodology was presented. Design/methodology/approach In this paper, an extension architecture and extension algorithm in the form of extending the existing topic modeling were proposed. The extended architecture and algorithm include data processing method based on topic ratio in document, correlation analysis and regression analysis of processed data for topics derived by existing topic modeling. In addition, in this paper, an analysis case of the online review of Seongsan Ilchulbong Peak was presented by applying the extended topic modeling algorithm. An exploratory analysis was performed on the Seongsan Ilchulbong online reviews through the basic text analysis. The data was transformed into 5-point scale to enable correlation and regression analysis based on the topic ratio in each online review. A regression analysis was performed using the derived topics as the independent variable and the review rating as the dependent variable, and hypotheses could be derived based on this, which enable the so-called inductive hypothesis establishment. Findings This paper is meaningful in that it confirmed the possibility of deriving a causal model and setting an inductive hypothesis through an extended analysis of topic modeling.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1545-1552
• /
• 2017

Identifying the load and mutual inductance is essential for improving the power transfer capability and power transfer efficiency of Inductive Power Transfer (IPT) systems. In this paper, a steady-state load and mutual inductance identification method focusing on series-parallel compensated IPT systems is proposed. The identification model is established according to the steady-state characteristics of the system. Furthermore, two sets of identification results are obtained, and then they are analyzed in detail to eliminate the untrue one. In addition, the identification method can be achieved without extra circuits so that it does not increase the complexity of the system or the control difficulty. Finally, the feasibility of the proposed method has been verified by simulation and experimental results.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.64-70
• /
• 2017

In the commercial building such as huge enterprise building, more accurate operation of the center-controlled roller blind. We design, in this work, the target disc that its shape is nonlinearly changing and the sensor coils that are differentially arranged. The performance shows less than 1% accuracy when it is implemented in the roller blind.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1073-1074
• /
• 2008

Compatibility concerns between train signalling systems and rolling stock are a significant problems to cross-acceptance of rolling stock in urban railway system. It is not possible to establish general rules for the maximum levels of interference allowed, valid for every country. So, in this paper, we measured conducted emission and inductive emission and analyzed results for DC rolling stock.

• The Journal of the Korean dental association
• /
• v.40 no.8 s.399
• /
• pp.620-627
• /
• 2002

Oral health depends on the intergrity of the oral mucosa for prevention of the penetration of microbes and macromolecules that might be infectious, allergenic or antigenic. The intraoral immune systems include the tonsils, adenoids and nasopharyngeal-associated lymphoreticular tissue, or NALT. Mucosal inductive sites of the gastrointestinal tract(Peyer's patches and the appendix) and solitary lymph nodes collectively compose the gut-associated lymphoreticualr tissue, or GALT system. Both NALT and GALT are inductive regions where foreign antigens derived from viruses, bacteria, yeast and other molecules are encountered. The integration of tissues in NALT and GALT as part of the mucosal immune system, is very important to keep the oral immune system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.7
• /
• pp.805-812
• /
• 2005

Smart home is one of the ubiquitous environment platforms with various complex sensor-and-control network. In this paper, a now learning methodology for learning user's behavior preference pattern is proposed in the sense of reductive user's cognitive load to access complex interfaces and providing personalized services. We propose a fuzzy inductive learning methodology based on life-long learning paradigm for knowledge discovery, which tries to construct efficient fuzzy partition for each input space and to extract fuzzy association rules from the numerical data pattern.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.349-355
• /
• 2013

This paper presents the multi-objective optimisation of an Inductive Coupled Power Transfer (ICPT) device. A setup as complicated as the one at hand in this paper is extremely hard to model analytically. To acquire some knowledge about the influence of the geometric factors, a sensitivity analysis is first performed using design of experiment (DoE) and finite-element modelling (FEM). It allows validating that the choice of the free factors is relevant. This being done, the optimisation itself is performed using a genetic algorithm (GA), with two objectives and a strict functioning constraint.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.254-259
• /
• 2002

A variable air-gap type system is widely used for inductive precision position measurement systems. This type transducer has high sensitivity but lacks a linear measurement range due to structural nonlinearity. Furthermore, as measurement range increases, linearity error is also increased. The alternative is a variable overlap-area type system. The sensitivity of this type is determined by the initial air-gap dimension, keeps the original value and does not deteriorate linearity in spite of the variations of the measuring range.