• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.63-70
• /
• 2012

In the hazardous areas where explosive gases, vapor or mists exist, electrical apparatus and installations must be the explosion-proof construction to prevent or limit the danger of the ignition of potentially explosive atmosphere. In Korea, nine types of protection have been specified in the government regulations at present: flameproof enclosure, pressurization, oil immersion, increased safety, intrinsic safety, non-incendive, powder filling, encapsulation, and special types. Among these types, the intrinsic safety has the construction which limit or by-pass igniting the electric energy using electronic devices. This type has lots of merits but at the same time requires a high-degree of technology. In this paper, we investigated several dominating factors which affect the minimum ignition energy; this energy plays a very important role in design and evaluation of the intrinsic safety type electrical apparatus. Electrode material, which is one of the most important factors, was intensively studied for the five sorts of material(Al, Cd, Mg, Sn, and Zn) with performing experiment in a low-voltage inductive circuit using IEC-type(International Electro-technical Commission) spark apparatus. The experimental results show that the minimum ignition energy of electrode material is varied: highest in Cd and lowest in Sn. We also confirmed the effect of electrode make-and-break speed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.82-88
• /
• 2009

Power capacitor is generally installed to compensate for the low power factor of inductive load But it has been used as passive filter to reduce harmonics generated by the power conversion device. Passive filter is composed by the series connection of reactor and capacitor. Because passive filter has play an important role on the absorber of harmonics, it takes voltage and current stress, follows partially burned on flamed and degradation, finally it has not guaranteed normal life. In this paper, we analyzed the effect that passive filter installed at the source side of PWM inverter is received by harmonics absorption.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.11
• /
• pp.717-723
• /
• 1999

The transient characteristics of grounding systems play a major role in the protection of power equipments, electronic circuits and info-communication facilities against surges which arise from lightning or ground faults. Electronic devices are very weak against lightning surges injected from grounding systems and can be damaged. The malfunction and damage of electronic circuits bring about bad operation performances, a lot of economical losses, and etc. Therefore, in order to obtain the effective protection measure of electronic devices from overvoltages and lightning surges, the analysis of the transient grounding impedances in essential. One of this work is to examine the transient behaviors of grounding impedances under steplike currents for various grounding systems. And the other of this work is to evaluate the transient behaviors of a grid with rods under impulse currents and to investigate the effect of grounding lead wire. Transient grounding impedances of a grid with rods under impulse current waves have been measured as a parameter of the length of the grounding leads. Z-t, Z-i and V-i curves of transient grounding impedance under impulse current waveforms have been measured and analyzed. It was found that the grounding impedance gives the inductive, resistive and capacitive aspects under steplike current. Transient grounding impedance characteristics were very different with shapes, geometries of ground electrodes. Also, they were dependent on the waveform and magnitude of impulse current.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.64-72
• /
• 2008

In the three phase four wire system, voltage unbalance caused by the unbalanced load operation, gives rise to current unbalance and de-rates by the increase of machine's loss and eventually enlarges power capacity and besides has a bad effect on power quality. Power capacitor has been used for the power factor correction of inductive load and the voltage stability of power system. And it uses instead of power side for magnetic excitation of induction motor. If voltage unbalance keeps up, it affects on voltage stress at the power capacitor and finally can be caused breakdown. In this paper, we analysed that voltage and current of power capacitor increases by the voltage unbalance factor and its stress is growing more and more.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.11
• /
• pp.1651-1657
• /
• 2015

In MHz operating wireless power transfer systems, skin- and proximity-effect losses in the transmitter and the receiver coils dominate the coil-to-coil efficiency of the system. A Litz-wire was regarded as a common solution for minimizing such Ohmic losses in high frequencies. In this paper, equivalent series resistances of 12 different cables including Litz-wire and copper tubing have been calculated and measured for a 6.78 MHz, 100W, 30 cm wireless power transfer system. It has been shown that the copper tubing has lower resistances compared to the Litz-wire in that frequency and a wireless power transfer system with the copper tubing was able to achieve much higher efficiency than a system using the Litz-wire. Calculations of the resistances and efficiencies were accomplished with analytical equations and those calculations were evaluated by experimental results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.2194-2210
• /
• 2018

In the era of big data, consumers capture more and more economic surplus yet the seed of distrust also grows with the fast-spreading of social commerce, this paper began with the idea that product types may determine the degree of consumers' distrust even when identical discounts are offered for those products on Chinese social commerce websites. We also attempted to determine if distrust negatively affected consumers' purchase attitudes. 20 representative products that are commonly sold on social commerce websites in China were chosen to examine the relationships among product types, discount rates, distrust levels, and purchase attitudes. Inductive interview was used to collect the data as well as consumers' perceptions of the relationships. Data analysis results suggested that consumers like deep discounts, but their distrust levels increase along with the discount rates, however, the levels of increasing distrust vary according to product types. High, medium, and low discount rate categorizations were made and three propositions were suggested. This paper will contribute to the body of knowledge on online social commerce market and provide valuable implications for e-retailers and general consumers in online social commerce websites in China.

• Korean Journal of Metals and Materials
• /
• v.46 no.5
• /
• pp.315-320
• /
• 2008

The effect of Mn additive on the thermoelectric properties of Fe-Si alloys prepared by a RF inductive furnace was investigated. The electrical conductivity and Seebeck coefficient were measured as a function of temperature under Ar atmosphere to evaluate their applicability to thermoelectric energy conversion. The electrical conductivity of the specimens increased with increasing temperatures showing typical semiconducting behavior. The electrical conductivity of Mn-doped specimens are higher than that of undoped specimens and increased slightly with increasing the amount of Mn additive. This must be due to the difference in carrier concentration and the amount of residual metallic phase ${\varepsilon}$-FeSi(The ${\varepsilon}$-FeSi was detected in spite of 100 h annealing treatment at $830^{\circ}C$). And metallic conduction increased slightly with increasing the amount of Mn additive. On the other hand, Mn-doped specimens showed the lower Seebeck coefficient due to metallic phase. The power factor of Mn-doped specimens are higher than that of undoped specimens and would be affected by the electrical conductivity more than Seebeck coefficient.

• Korean Journal of Metals and Materials
• /
• v.47 no.12
• /
• pp.860-865
• /
• 2009

The effect of Co additive on the electrical properties of Fe-Si alloys prepared by a RF inductive furnace was investigated. The electrical conductivity and Seebeck coefficient were measured as a function of the temperature under an Ar atmosphere to evaluate their applicability to thermoelectric energy conversion. The electrical conductivity of the specimens increased as the temperature increased, showing typical semiconducting behavior. The electrical conductivity of Co-doped specimens was higher than that of undoped specimens and increased slightly as the amount of Co additive increased. This is most likely due to the difference in the carrier concentration and the amount of residual metallic phase ${\varepsilon}$-FeSi (The ${\varepsilon}$-FeSi was detected in spite of an annealing treatment of 100 h at $830^{\circ}C$). Additionally, metallic conduction increased slightly as the amount of Co additive increased. On the other hand, Co-doped specimens showed a lower Seebeck coefficient due to the metallic phase. The power factor of Co-doped specimens was higher than that of undoped specimens. This would be affected more by the electrical conductivity compared to the Seebeck coefficient.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.605-610
• /
• 2013

Gamma-aminobutyric acid (GABA) is a non-protein amino acid widely present in organisms, which has shown several important physiological functions such as neurotransmission, hypotension induction, as well as diuretic and tranquilizer effects. They have also been extensively used in food industry. GABA contents in the grain and brown rice are about 1~4 mg/100 g and 4~8 mg/100 g, respectively but it is difficult to expect physiological activity from such low amounts of natural food intake. We investigate the effects of GABA-coated rice on the secretion of melatonin and serotonin which both have been used as sleep inductive compounds. As a result, the secretion of melatonin and serotonin from mice were found to be $3.578{\pm}0.158pg/mL$, $5.918{\pm}0.169ng/mL$ respectively. The melatonin and serotonin in mice increased significantly up to the 8.7 and 22.8 times respectively, when compared to that of the rice, but there was no cumulative effects. Due to the continuous intake of GABA-coated rice, which was developed as a functional food nutrient, inductive effects of melatonin and serotonin from general rice could be achieved and also the similar effect as taking up directly 25 mg/mL of GABA could be obtained.

• Journal of The Korean Association For Science Education
• /
• v.27 no.9
• /
• pp.809-817
• /
• 2007

The purpose of this research was to investigate the nature of the science views of science teachers and high school students as well as the views expressed in 10th grade science textbooks. The subjects were a high school science teacher, 18 male students and 11 female students in a 10th grade class located in Gyeongbuk Province, Korea. The data were analyzed in terms of three main categories of the nature of the science: the definition of science, the development of science, and the method of science. In the results, it was found that the textbook had an inductivism point of view, and that the teacher had a falsificationism point of view in terms of the definition of science. However, the teacher presented the inductive point of view of the textbook in the class. After the class, the students showed an inductive point of view. In terms of scientific development, the textbook represented a relativism point of view briefly, and the viewpoint of the teacher also expressed relativism. The teacher taught briefly from the relativism point of view, as in the textbook. The viewpoints of the students were inductivism and were not affected by the textbook or the explanations of the teacher. In terms of scientific methods, the viewpoints of the textbook and the teacher were falsificationism, and the teacher represented falsificationism views in her classes. The views of the students also showed falsificationism after their classes. However, before conclusions can be made, it is necessary to find concrete proof of the teaching effect on the viewpoints of the students in continuing research.