• 한국조명전기설비학회지:조명전기설비
• /
• 제6권6호
• /
• pp.32-41
• /
• 1992

In this paper, an advanced Pulse Width Modulation Inverter strategy for driving a variable-speed induction motor is introduced. A switching pattern making use of the near-proportionality of voltage and frequency in AC machines operating with constant flux was computed. At low magnitudes and ow frequencies of the fundamental, many more harmonics are eliminated than at high magnitudes and frequencies. In order to keep the inverter switching frequency constant over the output frequency range, the chopping frequency is diminished as the frequency of the fundamental increases. Using these modulation strategy, the harmonics components of PWM inverter are efficiently eliminated.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.694-701
• /
• 2010

In this paper an effective direct torque control (DTC) and stator flux control is developed for a quasi six-phase induction motor (QIM) drive with sinusoidally distributed windings. Combining sliding-mode (SM) control and adaptive input-output feedback linearization, a nonlinear controller is designed in the stationary reference frame, which is capable of tracking control of the stator flux and torque independently. The motor controllers are designed in order to track a desired second order linear reference model in spite of motor resistances mismatching. The effectiveness and capability of the proposed method is shown by practical results obtained for a QIM supplied from a voltage source inverter (VSI).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.540-543
• /
• 2003

This paper presents a method for increasing controller performance through multirate state estimation for ac machines at a low velocity. The multirate controller outputs control desired speed at each measurement Instant. The simulation results show that the performance of multirate velocity estimation and control at low velocity is improved than single rate one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.309-311
• /
• 2003

유도 전동기 보호를 위한 계전기 개발을 위해서는 유도 전동기의 내부 사고에 대한 모델링이 선행되어야 한다. 본 논문에서는 유도 전동기의 내부사고 중에서 고정자 권선의 지락 사고에 대한 모델링 방법을 제시하였으며 이를 MATLAB을 이용하여 모의하였다. 제시한 모델링 방법을 이용하여 유도 전동기의 기동 현상을 모의하였으며 이를 EMTP에서 모의한 기동 현상과의 비교를 통하여 제시한 모델링 방법의 타탕성을 검증하였다.

• 농촌지도와개발
• /
• 제3권1호
• /
• pp.1-16
• /
• 1996

The purpose of this study was to interpret the transformation of Cooperative Groups for Agricultural Production(CGAP) with the change of the Agricultural Productive Force. The specific objectives were; 1) To investigate the change of agricultural labour-power, 2) To investigate the change of agricultural mechanization and arable land, 3) To interpret the transformation and content of CLAP. The population of farmhouseholds has decreased continuously since the late 1960s. Especially, with the move-outs of youth ages of twenties to forties, the condition of agricultural labour-power has been more serious. The processing of agricultural mechanization was a small scale step in the 1970s, but after the 1980s there was a spread of middle-large machines. However the usage rate of agricultural machines was constrained by the bad conditions of arable land. From the 1970s to now, the CGAP have bean processed by many kinds of patterns. In the 1970s, the lack of labour-power caused the creation of the Co-Working Team. After the late of 1970s, the wage of agricultural employees was raised, because the working population of agriculture was cut down. Also, the induction of agricultural machine was promoted. As a result, in the 1980s, the Machine-Using Team occurred due to these conditions of agricultural productive force. In the late of 1980s, the population decreased more rapidly, and the use of large machines were spread. Than farmhouseholds laking labour-power gave a trust to other farmhouseholds and Teams which had machines. In 1990, Given-Trust Cooperations were enacted by law, and in order to overcome the lack of labour-power, and solve the problem of the successors of agriculture, Cooperative Organizations were also enacted by law. Finally, in Korea from the 1970s to now, as the agricultural productive force has barn changed, the Co-Working Team was transformed into the Machine-Using Team, and the Machine-Using Team was transformed into the Given-Trust Cooperation, and the Cooperative Organization.

• Journal of Electrical Engineering and Technology
• /
• 제3권2호
• /
• pp.224-234
• /
• 2008

Multi-phase machines can be used in variable speed drives. Their applications include electric ship propulsion, 'more-electric aircraft' and traction applications, electric vehicles, and hybrid electric vehicles. Multi-phase machines enable independent control of a few numbers of machines that are connected in series in a particular manner with their supply being fed from a single voltage source inverter(VSI). The idea was first implemented for a five-phase series-connected two-motor drive system, but is now applicable to any number of phases more than or equal to five-phase. The number of series-connected machines is a function of the phase number of VSI. Theoretical and simulation studies have already been reported for number of multi-phase multi-motor drive configurations of series-connection type. Variable speed induction motor drives without mechanical speed sensors at the motor shaft have the attractions of low cost and high reliability. To replace the sensor, information concerning the rotor speed is extracted from measured stator currents and voltages at motor terminals. Open-loop estimators or closed-loop observers are used for this purpose. They differ with respect to accuracy, robustness, and sensitivity against model parameter variations. This paper analyses operation of an MRAS estimator based sensorless control of a vector controlled series-connected two-motor five-phase drive system with current control in the stationary reference frame. Results, obtained with fixed-voltage, fixed-frequency supply, and hysteresis current control are presented for various operating conditions on the basis of simulation results. The purpose of this paper is to report the first ever simulation results on a sensorless control of a five-phase two-motor series-connected drive system. The operating principle is given followed by a description of the sensorless technique.

• 한국정보통신학회논문지
• /
• 제17권10호
• /
• pp.2239-2244
• /
• 2013

산업용 기기는 전력 공급용 전선으로 인해 이동성에 제약이 따른다. 최근 자유로운 이동성이 요구되는 산업용 기기의 무선 전력 공급에 관한 연구가 많은 주목을 받고 있다. 본 논문에서는 근거리에서 장비의 배터리에 무선으로 전력을 공급하는 자기 유도방식의 시스템을 제안한다. 제안하는 시스템은 13.56 MHz에서 동작하며, 송수신 전력 모듈간의 거리는 20~30 mm으로 설계하였다. 실험을 통해 제안하는 시스템으로 약 15 V 의 배터리를 충전하는데 135 분이 걸리는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.226-228
• /
• 2006

This paper presents the two lossless auxiliary inducors-assisted voltage source type half bridge(single ended push pull:SEPP) series resonant high frequency inverter for induction heated fixing roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation forwide its output power regulation ranges and load variations under constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operatprinciple is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation charactertics-based on the high frequency PDM strategy. The experimenoperating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimenones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliimplemented here is proved from the practical point of view.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.75-79
• /
• 2001

This paper presents a novel version of an active voltage clamped ZVS-PWM high frequency inverter using IGBTs for electromagnetic induction eddy current-based rolling drum heating in new generation copy and printing machines in consumer business use. The operating principle of this inverter circuit and unique features are described herein. Its constant frequency duty cycle (asymmetrical PWM) controlled voltage source quasi-resonant soft switching high frequency inverter employing IGBTs is proposed, which is capable of achieving stable and efficient zero voltage soft switching commutation over a widely specified power regulation range from full power to low power. The operating performances in a steady state of this inverter is discussed and evaluated on basis of simulation and experimental results as an induction heated roller in new generation copy machine.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.148-155
• /
• 2011

Direct torque control(DTC) of induction machines is known to offer fast instantaneous torque and flux control with a simple control structure. However, this scheme has two major disadvantageous, namely, a variable inverter switching frequency and a high torque ripple. These problems occur due to the use of hysteresis comparators in conventional DTC schemes, particularly in controlling the output torque. This paper reviews the utilization of constant frequency torque controllers (CFTC) in DTC to solve these problems while retaining the simple control structure of DTC. Some extensions of the work in utilizing a CFTC will be carried out in this paper which can further reduce the torque ripple. This is particularly useful for a system which has a limited/low sampling frequency. The feasibility of a CFTC with an extended carrier frequency in minimizing the torque ripple is verified through experimental results.