• Structural Engineering and Mechanics
• /
• v.82 no.2
• /
• pp.259-270
• /
• 2022

The paper investigates the residual stresses arising in a thermoviscoelastic cylinder as a result of layer-by-layer deposition of material on its lateral surface. Internal stresses are caused by incompatible deformations that accumulate in the assembly as a result of joining parts with different temperatures. For the analysis of internal stresses, an analytical solution to the axisymmetric quasi-static problem of thermoelasticity for a growing cylinder is constructed. It is shown that the distribution of residual stresses depends on the scenario of the surfacing process. In this case, the supply of additional heat to the growing body can significantly reduce the unevenness of temperature fields and reduce the intensity of residual stresses. The most effective is uneven heating, which can be realized, by the action of an alternating current with a tunable excitation frequency. The temperature and residual stresses fields on the growing surface is analyzed numerically for Titanium and Copper materials.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.329-332
• /
• 2008

Nowadays, It is required human body-friendly, good mechanical properties, and economical efficiency material, simultaneously. The material to meet above requirement condition rear up high nitrogen stainless steel(HNS). However, HNS have a lot of problem such as poor workability, hot crack sensitivity. So, It is needed the condition of plastic working to overcome above many problem. In this study, VIM ingot with 100kg was made by pressurized vacuum induction melting. And then, The slab perform for hot rolling was prepared by open-die forging. Hot rolling process was performed by computer simulation according to change of height reduction, rolling temperature, heating numbers, rolling pass and so forth. The results of analysis were investigated between analysis and lab-scale rolling product.

• Archives of Reconstructive Microsurgery
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2013

Rats and mice are commonly used in experimental laboratories and anesthetic drugs are important for researchers to understand the details. Administration of fluids helps to stabilize the experimental animals before anesthesia via intravenously through the lateral vein in rats and in case of difficulty in catheterization and maintenance, fluids are usually administered as boluses. Large volumes of cool fluids will rapidly lead to hypothermia and all parenteral fluids must be warmed to body temperature before administration. Premedication with a sedative may ease induction with volatile anesthetic drugs. The first choice for rodent anesthesia is complete inhalational anesthesia. The second option is using injectable anesthesia. Recovery from the volatile agents that have been used rapid when the agent is no longer administered. Anesthetic monitoring equipment is an infant-size bell sthethoscope that can be used to ausculate the heart and lungs. Supplemental heating should be provided to reduce the heat loss supply and maintain core body temperature. The kinds of drugs, characteristics, route of administration and care after surgery were reviewed and summarized from the references. Anesthetic drugs, maintenance, monitoring and aftercare are important in the laboratories to keep the animal safe in all experimental procedures.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.141-149
• /
• 2009

In this paper, quasi-static FDTD method is implemented by FORTRAN programming, and it is used for analysis of body induced current in middle frequencies. The quasi-static FDTD program is validated by comparing the calculation result with analytic solution of the test model, to which it is difficult to apply conventional FDTD. It is confirmed that the time-step is reduced by $5.68{\times}10^6$ times. Using validated numerical technique, body induced current distribution in high resolution 3-D human model is calculated for 20[kHz] magnetic field exposure and 1[MHz] electric field exposure. Also, the effect of grounding condition of both feet on the distribution and amplitude of the induced current is analyzed. It is expected that this research can be applied to various fields including safety assessment of body induced current and development of diagnosis devices using bio-electricity.

• Journal of Korean Academy of Nursing
• /
• v.37 no.7
• /
• pp.1061-1072
• /
• 2007

Purpose: The purpose of this study was to compare the effects of intravenous fluid warming and skin surface warming on peri-operative body temperature and acid base balance of abdominal surgical patients under general anesthesia. Method: Data collection was performed from January 4th, to May 31, 2004. The intravenous fluid warming(IFW) group(30 elderly patients) was warmed through an IV line by an Animec set to $37^{\circ}C$. The skin surface warming(SSW) group(30 elderly patients) was warmed by a circulating-water blanket set to $38^{\circ}C$ under the back and a 60W heating lamp 40 cm above the chest. The warming continued from induction of general anesthesia to two hours after completion of surgery. Collected data was analyzed using Repeated Measures ANOVA, and Bonferroni methods. Results: SSW was more effective than IFW in preventing hypothermia(p= .043), preventing a decrease of $HCO_3{^-}$(p= .000) and preventing base excess(p= .000) respectively. However, there was no difference in pH between the SSW and IFW(p= .401) groups. Conclusion: We conclude that skin surface warming is more effective in preventing hypothermia, and $HCO_3{^-}$ and base excess during general anesthesia, and returning to normal body temperature after surgery than intravenous fluid warming; however, skin surface warming wasn't able to sustain a normal body temperature in elderly patients undergoing abdominal surgery under general anesthesia.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.6
• /
• pp.301-308
• /
• 2010

A steel with chemical composition, 0.22% C, 0.25% Si, 1.26% Mn, 0.22% Cr, 0.04% Ti, 0.0042% B, and a microstructure of ferrite and spheroidized cementite has been press-formed to automotive center pillar followed by local-hardening heat-treatment. Hardness, tensile properties, fractography, microstructure and surface roughness of local-hardening heat-treated automotive center pillar have been examined. The directly heated and quenched area had fully martensitic structure with Vickers hardenss in the range of 500 to 510. The heat affected area close to the directly heated area showed dual-phase structure of ferrite and martensite. The width of the heat-treated and heat-affected areas after the local-hardening heat treatment was ranging from 32 mm to 50 mm. The surface of the local-hardening heat-treated center pillar revealed some temper color as a consequence of the oxidation during the heat treatment, but the surface roughness was not affected by the local-hardening heat treatment.

• Nuclear Engineering and Technology
• /
• v.36 no.1
• /
• pp.104-111
• /
• 2004

The melting temperatures of $UO_2,\;UO_2-6wt\%Gd_{2}O_3,\;UO_2-12wt\%Gd_{2}O_3,\;UO_2-2wt\%Er_{2}O_3,\;and\;UO_2-4wt\%Er_{2}O_3$ fuels were measured. Fuel materials were loaded in a tungsten capsule of which shape met the black body condition. The melting temperature was measured by the thermal arrest method during heating of the capsule in an induction furnace. The measured melting temperature of $UO_2$ fuel was $2815{\pm}20^{\circ}C$. The solidus and liquidus temperatures of $UO_2-Gd_{2}O_3\;and\;UO_2-Er_{2}O_3$ had also been measured, and it was observed that the solidus temperatures of them were lower than the liquidus temperature by $15{\sim}25^{\circ}C$. Measured melting temperatures of $UO_2,\;UO_2-Gd_{2}O_3\;and\;UO_2-Er_{2}O_3$ fuels were as follows:

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.173-178
• /
• 2001

This study was performed to know the hypocholesterolemic effect of depolymerized alginate obtained by hydrolysis of alginate through a heating process at $121^{\circ}C$. The changes of total cholesterol, HDL-cholesterol, LDL-cholesterol, triglycerides and phospholipid levels in serum, as well as the atherogenic index were elucidated in rats for 35 days. In order to evaluate single-dose toxicity of HAG-50 in rats via oral routes, induction any mortalities and abnormal signs in clinical finding, body weight, gross findings and histopathological finding, and estimation of $LD_{50}$ were elucidated. Total cholesterol, HDL-cholesterol, LDL-cholesterol, triglycerides and phospholipid levels in the serum significantly decreased and resulted in the decrease of atherogenic index in rats fed diets containing $5\%\;and\;10\%$ HAG-50 (p<0.01). HAG-50 did not induce any mortalities and abnormal signs in clinical findings, body weights, gross findings and histopathological findings in single-dose toxicity test via oral routes of rats, after which it was impossible to estimate $LD_{50}$ values.

• Journal of Aquaculture
• /
• v.11 no.3
• /
• pp.371-380
• /
• 1998

This study has been conducted to develop the techniques for spat production of the sun and moon scallop from January 1995 to December 1996. With the adult scallops collected from the Sogwipo area, spawning induction and larvae rearing were attempted several times and monthly changes of GSI were also monitored during the experimental period. The results obtained wre as follows. 1. GSI started to increase from June and showed the maximum value of 22.17 and 14.98 in female and male respectively in November, and then gradually decreased from December. 2. Spawning induction by heating method turned out to the most efficient way showing the responding rate of 64.8~91.5%. The responding temperature was $21.4~26.4{\circ}C$ which was $3.1~8.5{\circ}C$ increased from the rearing temperature of $16.3~18.3{\circ}C$. An average number of eggs spawned was $9.2{\times}10^5$ 3. the average size of eggs after fertilization was about $72{\mu}m$ in diameter. The first polar body discharge, blastula formation, and trochopore larvae appearance occurred 30 mininutes, 18 hours, and 22 hours after fertilization respectively. 4. Settling rates in various collectors were similar one another, whereas pouring larvae in the mesh was the most efficient way for larval setting. 5. The spates grew to be 1mm in their shell length for the first 50 days after fertilization and 9.6mm in 135days. 6. Correlation between shell length (SL) of the spat and the number of days (X) after spat settlement could be expressed as $SL=257.75e ^{0.0272x}$(r=0.9100).