• 한국산업보건학회지
• /
• 제27권4호
• /
• pp.423-432
• /
• 2017

Objectives: This study was conducted to evaluate asbestos handling history of workers at automobile manufacturing plants in Korea. Methods: National regulations on asbestos and Korea Occupational Safety and Health Agency(KOSHA) database on the information of asbestos containing products were reviewed. We investigated asbestos related materials from one automobile manufacturing plant. Material safety data sheets(MSDS) collected in 2010, work environment monitoring results reported from 2000 to 2013, trade union reports and asbestos survey reports were reviewed. We also interviewed workers with long career and did walk-through survey. Results: The Ministry of Labor in Korea has permitted asbestos manufacturing since 1990. In 1997, the use of crocidolite and amosite asbestos were banned. In 2007, the Korean government announced a total ban on the manufacturing, importation and use of all kinds of asbestos, which took full effect in 2009. A total of 174 asbestos products information from KOSHA database was analyzed. Extruded cement panel for building, special brake for crane farm machinery, gasket, joint sheet and thermal insulator were produced until 2007. From automobile manufacturing plant survey, we confirmed that asbestos containing materials(ACM) such as gasket, heating induction materials have been used until 2011. Asbestos containing building materials(ACBM) such as bamlites, slate and ceiling tex were reported at 122 asbestos dismantling projects in 2014. Conclusion: Although the use of all kinds of asbestos were banned from 2009, ACMs and ACBMs installed before 2009 were still found at automobile manufacturing plant until 2011 and 2014 respectively. In particular, asbestos slates should be managed because most of slates had not been removed until 2014.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.260-268
• /
• 2020

본 논문에서는 스위칭 시 발생하는 턴-온 및 턴-오프 손실을 줄일 수 있는 LS-ZVS-LSTC를 이용한 D급 SEPP형 고주파 공진 인버터에 대해서 나타내고 있다. 본 논문에서 제안한 LS-ZVS-LSTC를 이용한 고주파 공진 회로의 해석은 무차원화 파라메타를 도입하여 범용성 있게 기술하였다. 또한 제안 인버터의 운전 특성은 무파원화 제어 주파수(μ), 무차원화 부하시정수(τ), 결합계수(κ) 등의 제어 파라메타를 이용하여 특성 평가를 수행하였다. 특성 평가를 통한 특성치를 토대로 1.8[kW] D급 SEPP형 LS-ZVS-LSTC 고주파 인버터 설계 기법의 일예를 제시하였으며, 이론 해석의 정당성은 실험을 통해 입증하였다.

• 조명전기설비학회논문지
• /
• 제17권1호
• /
• pp.94-102
• /
• 2003

본 논문은 고주파 전원에 사용되는 풀 브릿지 부하 병렬형 고주파 공진 인버터 회로를 연구대상으로 하고 출력제어기법으로는 펄스 주파수 변조(PFM, 펄스 폭 변조(PWM) 그리고 펄스 위상 변화(Phase-Shift)잎 경우를 비교 검토하였다. 회로의 해석은 정규화 파라메타를 도입하여 범용성 있게 기술하였고, 인버터 특성은 3가지 구동신호패턴에 의한 스위칭 주파수($\mu$), 펄스폭($\theta$d), Phase-Shift의 위상차각($\phi$)의 변화와 제 파라메타에 따라 특성 평가를 행하였다. 실험을 통해 이론해석의 타당성을 검증하였다. 향후, 3가지의 구동신호제어기법에 의한 특성들은 유도가열 응용, DC-DC 컨버터 등의 전원 시스템의 출력제어 시에 유용한 자료로 제공될 것으로 사료된다.

• 한국미생물·생명공학회지
• /
• 제16권6호
• /
• pp.499-504
• /
• 1988

Xylan를 기질로 직접 alcohol 발효를 목적으로 각종 토양을 균원시료로 하여 xyla를 분해, 자화하는 효모를 분리하여 동정하고 몇 가지 중요한 성질을 조사하였다. Xylanase를 생산하는 XB-33 효모는 Cryptococcus ater 유연균으로 동정되었다. XB-33 균주의 xylanase 생성은 xylan에 의해 induction되고 xylose나 glucose에 의해서는 repression되었다. 또한 xylan 농도는 1% 수준에서 가장 높았으며, 배양일수 6일째 그 황성이 최고치를 나타내었다. XB-33 균주가 생성 분비하는 xylanase를 DEAE-Sephadex A50으로 colum chromatography 하여 부분 정제한 후 이의 생화학적 특성을 검토한 결과 xylanase의 최적작용 pH는 5.0, 최적 온도는 5$0^{\circ}C$였으며 pH 5.0~7.0에서와 온도 6$0^{\circ}C$ 이하에서 의 효소활성은 비교적 안정하였고 xylan에 대한 xylanase의 작용양상을 조사하기 위해 TLC한 결과 최종산물로서 xylose가 확인되었다. 그리고 xylanase의 xylan에 대한 Km치는 20(mg/ml)이었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.387-390
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit Incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.16-28
• /
• 2014

This paper presents a novel high-power-factor circuit topology of AC to AC current-fed type high frequency resonant inverter which includes the function of power factor correction(PFC) in the proposed inverter to operate the AC input block with high power factor. The proposed circuit topology of AC to AC current fed type high resonant inverter removes DC link electrolytic capacitor and has also the one of power factor correction(PFC) in the inverter circuit without an additional PFC circuit since the input current by constituting it in parallel as an unit inverter, which assumes the class-E high frequency resonant inverter of conventional current-fed type, flows in the form of the resultant current flowing through each constant current reactor($L_{d1}$, $L_{d2}$). The circuit analysis of proposed inverter is generally described by adopting the normalized parameters and the evaluation of its operating characteristics are conducted by using the parameters such as the ratio of switching and resonant frequency(${\mu}$), coupling coefficient(k) and so on. An example of procedure for circuit design based on the characteristic values obtained from the theoretical analysis is presented. To confirm the validity of the theoretical analysis, the experimental results are also presented. In the future, the proposed inverter shows it can be practically used as power supply system for induction heating application, DC-DC converter etc.

• 한국결정성장학회지
• /
• 제29권1호
• /
• pp.24-31
• /
• 2019

사파이어 단결정을 성장시키는 기존 합성방법들의 원료충진율을 높이기 위한 방법으로 스컬용융법을 사용하여 $Al_2O_3$ 파우더를 용융시켰다. 냉각도가니 크기는 내경 24 cm, 내부 높이 30 cm로서 2.75 MHz 발진주파수에서 15 kg의 $Al_2O_3$ 파우더를 1시간 내에 모두 용융시켰으며, 3시간 동안 융액상태로 유지 후 자연냉각 시켰다. 냉각된 잉곳의 부분별 면밀도 및 성분은 SEM-EDS를 통해 분석하였다. 잉곳의 면밀도 및 $Al_2O_3$ 함량은 고주파유도가열 시 냉각도가니 내부에 형성되는 온도 분포와 관련이 있으며, 온도가 높게 형성되었던 부분이 면밀도 및 순도가 높게 나타나는 경향을 보였다.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.207-215
• /
• 2019

The aim of the research is analyzing the simple adiabatic temperature rising properties and the heat of hydration based on different placing timing of the mass concrete depending on various replacing ratios of blast furnace slag to comparative analyze the thermal cracking index and cracking possibility. As a result from the experiment, a suggested adiabatic temperature rising equation based on various blast furnace slag replacing ratios can be provide favorable correlation with over 0.99 of $R^2$ value by applying the initial induction period. With this relationship, more accurate prediction of the amount of the hydration heat rising and heating timing, and it is known that there is an approximately $13.1^{\circ}C$ of gap between plain concrete without blast furnace slag and concrete with 80 % of replacing blast furnace slag. To control the setting time and heat rising gap, the mix designs between top and bottom concrete casts were changed 15 cases, and D, E, H, I, and L models of controlling the heat of hydration showed 41.23 to $46.88^{\circ}C$ of core temperature and 0.98 to 1.27 of thermal cracking index. Therefore the cracking possibility was 15 to 52 % of favorable results of possibly controlling both the cracking due to the internal and external retainment and concrete temperature at early age.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1547-1554
• /
• 2017

VESTA (Verification of Ex-vessel corium STAbilization) and VESTA-S (-small) test facilities were constructed at the Korea Atomic Energy Research Institute in 2010 to perform various corium melt experiments. Since then, several tests have been performed for the verification of an ex-vessel core catcher design for the EU-APR1400. Ablation tests of an impinging $ZrO_2$ melt jet on a sacrificial material were performed to investigate the ablation characteristics. $ZrO_2$ melt in an amount of 65-70 kg was discharged onto a sacrificial material through a well-designed nozzle, after which the ablation depths were measured. Interaction tests between the metallic melt and sacrificial material were performed to investigate the interaction kinetics of the sacrificial material. Two types of melt were used: one is a metallic corium melt with Fe 46%, U 31%, Zr 16%, and Cr 7% (maximum possible content of U and Zr for C-40), and the other is a stainless steel (SUS304) melt. Metallic melt in an amount of 1.5-2.0 kg was delivered onto the sacrificial material, and the ablation depths were measured. Penetration tube failure tests were performed for an APR1400 equipped with 61 in-core instrumentation penetration nozzles and extended tubes at the reactor lower vessel. $ZrO_2$ melt was generated in a melting crucible and delivered down into an interaction crucible where the test specimen is installed. To evaluate the tube ejection mechanism, temperature distributions of the reactor bottom head and in-core instrumentation penetration were measured by a series of thermocouples embedded along the specimen. In addition, lower vessel failure tests for the Fukushima Daiichi nuclear power plant are being performed. As a first step, the configuration of the molten core in the plant was investigated by a melting and solidification experiment. Approximately 5 kg of a mixture, whose composition in terms of weight is $UO_2$ 60%, Zr 10%, $ZrO_2$ 15%, SUS304 14%, and $B_4C$ 1%, was melted in a cold crucible using an induction heating technique.

• 조명전기설비학회논문지
• /
• 제20권2호
• /
• pp.16-23
• /
• 2006

본 논문에서는 고역률을 가지고 영전압 스위칭으로 동작되는 새로운 단일 전력단 고주파 공진 인버터 링크형 DC-DC 컨버터 회로에 관하여 기술하고 있다. 제안된 토폴로지는 역률 교정기로써 하프 브리지형 부스트 컨버터와 하프 브리지 고주파 공진 컨버터를 단일 전력단으로 일체화 시켰다. 역률 보상용 부스트 컨버터의 부스트 인덕터 전류를 가변 스위칭 주파수와 일정 듀티비를 가지고 불연속 전류 모드(DCM)로 동작시킴으로써 부가적인 입력 전류제어기 없이 높은 입력 역률을 얻을 수 있다. 또 제안한 토폴로지의 이론해석을 무차원화 파라미터를 도입하여 범용성 있게 하여 회로 설계 전단계에서 필요한 특성값을 도식적으로 표현하다. 첨가해, 제안한 토폴로지의 상용화 가능성과 이론해석의 정당성을 입증하기 위해 스위칭 소자로 Power-MOSFET IRF 740을 제안회로 토폴로지의 스위칭 소자로 채용해 실험 장치를 구성하여 검토를 행하였다. 제안된 컨버터는 향후 통신용 DC/DC 컨버터의 전원장치, 방전등용 진원장치 등의 전원시스템에 유용히 사용될 것으로 사료된다.