• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.160-161
• /
• 2019

본 논문에서는 Si-MOSFET 및 GaN-HEMT 기반 All Metal Induction Cooktop의 고효율 동작을 위한 공진네트워크 설계 및 운전주파수영역을 제시한다. 이를 위해 워킹 코일과 용기의 등가 파라미터를 바탕으로 동작 주파수에 따른 공진 네트워크를 각각 설계한다. 또한 시뮬레이션 및 수학적 계산을 통해 설계된 시스템의 주파수 조건 별 손실 비교를 통해 각 스위칭 소자에 따른 적합한 공진네트워크 설계방안을 제시한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.6
• /
• pp.451-458
• /
• 2020

In this study, a trade-off analysis of a power conversion system (PCS) is performed in accordance with a power semiconductor device to establish the suitable operating frequency range for the anyplace induction heating system. A resonant network is designed under each operating frequency condition to compare and analyze the PCS losses depending on the power semiconductor device. On the basis of the simulation results, the PCS losses and frequency condition are calculated. The calculated results are then used for a trade-off analysis between Si-MOSFET and GaN-HEMT based on PCS. The suitable operating frequency range is determined, and the validity of the analysis results is verified by the experiment results.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.52-54
• /
• 2019

본 논문에서는 Anyplace Induction Cooktop 시스템의 설계 방안을 제시한다. 다수의 워킹코일이 적용된 Anyplace 시스템은 전력밀도 향상을 위해 고주파 동작이 필요하다. 따라서 시뮬레이션 및 수학적 계산을 통한 동작 주파수, 전력 반도체 소자 조건 별 시스템의 손실 및 부피 간 Trade-off 분석이 필요하다 따라서 분석 결과를 토대로 각 전력반도체 소자 기반 시스템의 적합한 동작 주파수 영역 및 공진 네트워크 설계 방안을 제시한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.11
• /
• pp.690-695
• /
• 2016

Induction cooktop has a great attention due to its safety, quick heating and cleanness compared to gas oven. However, the materials for induction cookware is limited to steel or stainless-steel which has the magnetic property. Recently, it has been tried to apply various porcelain to induction cookware after printing the silver layer on the bottom of cookware plates and co-firing at high temperature. Glass frits are added in the silver paste to improve an adhesion force between porcelain materials containers and transferred silver layer. The hybrid silver pastes for induction cookware requires the proper electrical resistance and the thermal conductivity with base plates. After sintering process at $800^{\circ}C$, a part of melted glass migrated to the porcelain and the rest of the glass frit was exposed to the surface. It was confirmed that most of the glass frit formed an adhesion layer between the porcelain and transferred silver layer that enhances the adhesion force.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.3
• /
• pp.256-264
• /
• 2022

The frequency power control method (FCM) which has a wide operating frequency range is adopted for induction heating (IH) cooktops. When FCM is applied to the full-bridge series resonant converter (FB-SRC) based IH system, high-frequency switching of the inverter is required compared to the half-bridge SRC (HB-SRC)-based IH system. Therefore, the switching loss of the inverter increases, and applying FCM under the condition that the inverter operating frequency range is limited is difficult. Therefore, this paper proposes a control strategy with the phase shift power control method considering that limited frequency conditions are presented. Loss analysis following the control method is performed through simulation and mathematical analysis. In addition, the validity of the proposed control strategy is verified by analyzing the heating performance following the control method through the test results of the 3,200[W] prototype.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.3
• /
• pp.33-37
• /
• 2015

A numerical study on the IPM/Bridge Diode cooling and coil cooling has been performed. Results are presented as plots of thermal resistance, temperature drop and RPM-ratio. CFD analysis for conventional cooling system has been performed as a reference case. As the RPM-Ratio was increased, heatsink thermal resistance and coil temperature were decreased. IPM/Bridge Diode thermal resistance and temperature of the coil is tended to be trade-off. The temperature of coil closest to the AC-motor fan showed the most significant change in accordance with duct design. The temperature of coil located at the top of DC-motor fan showed the most significant variation as the cooling air passes the heatsink fin area.