• 터널과지하공간
• /
• 제8권2호
• /
• pp.96-106
• /
• 1998

Rock contains discontinuities at all scales. These discontinuities make rock behave in a complex way. This paper discusses a new approach to underground design based on the theory of rock fracture mechanics. The mechanism of deformation and failure of coal was studied by observing the distributions of length, orientation and spacing of the pre-existing as well as stress-induced cracks. Different types of crack information. The crack information is dependent on the scale used. The cracks propagate along the intersections of the pre-existing cracks, and both extensile and shear crack growth occur depending on the direction of the load relative to the bedding planes. An analytical model that takes into account both shear and extensile crack growth was developed to predict the nonlinear stress-strain behavior of coal including strain-hardening and strain-softening.

• Computers and Concrete
• /
• 제1권2호
• /
• pp.189-209
• /
• 2004

Several extensions to the Thelandersson phenomenological model for concrete under transient high temperatures are explored. These include novel expressions for the temperature degradation of the elastic modulus and the temperature dependency of the coefficient of the free thermal strain. Furthermore, a coefficient of thermo mechanical strain is proposed as a bi-linear function of temperature. Good qualitative agreement with various test results taken from the literature is demonstrated. Further extensions include the effects of plastic straining and temperature dependent Poisson's ratio. The models performance is illustrated on several simple benchmark problems under uniaxial and biaxial stress states.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1111-1129
• /
• 2014

A 9300 TEU container carrier was equipped in 2006 with instrumentation aimed at wave induced accelerations, and motions. In 2010 the system was extended with strain sensors to include structural loads. Section loads for vertical bending could be readily obtained but the originally intended derivation of horizontal bending and torsion from the measured strains was found to be unreliable. This paper addresses an alternative approach that was adopted in the post processing of results. In particular the concept to use acceleration sensors to capture global hull deformations along the length of the hull, and the use of a data fusion procedure to obtain section loads from combined sensor data and finite element calculations. The approach is illustrated by comparison of actually measured accelerations and local strains with values obtained from the data fusion model. It is concluded that the approach is promising but in need of further validation and development. In particular the number and shapes of the modes used may not have been sufficient to represent the true deflection and thus strain distributions along the high loaded areas.

• Nuclear Engineering and Technology
• /
• 제20권4호
• /
• pp.241-245
• /
• 1988

핵연료봉의 PCI 파손은 원자로의 운전제한과 밀접한 관계가 있기 때문에, 출력급증 조건에서 핵연료봉의 PCI 파손을 지배하는 파손인자들의 거동을 검토하는 것은 매우 중요하다. 본 연구에서는 피복관에서의 원주방향 응력, 원주방향 변형도, 원주방향 주름 높이, 크립 변형율 및 변형도 에너지등의 파손인자들에 대한 거동특성을 핵연료봉 성능해석용 전산코드인 FEMAXI-IV를 이용하여 출력급증량 및 출력증가율의 운전인자들의 함수로 검토하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.778-779
• /
• 2006

Manufacturing technologies of micro parts were studied in nano grained Al-1.5mass%Mg alloy. During compressive test at $300^{\circ}C$, the Al alloy showed stain softening phenomenon by grain boundary sliding regardless of strain rate. Micro spur gear with ten teeth (height of $200{\mu}m$ and pitch of $250{\mu}m$) was fabricated with sound shape by micro forging. During micro forging, increase of applied stress induced by friction between material and die surface was effectively compensated by decrease of stress by strain softening behavior and as a result, flow stress increased only about 50 MPa more than that in compressive test

• Journal of Microbiology and Biotechnology
• /
• 제6권6호
• /
• pp.397-401
• /
• 1996

A bacterial strain CFCl, which produced an extracellular cycloinulooligosaccharide fructanotransferase(CFTase), was isolated from soil. The isolated strain was identified as a strain of Bacillus sp. The synthesis of CFTase by the bacterium was found to be induced by inulin which was added to the culture medium as a carbon source. The highest activity of CFTase was observed at pH 7.5 and $37^{\circ}C$ in the medium containing 4% inulin and 0.5% peptone as a carbon source and a nitrogen source, respectively. Under the optimal conditions, the enzyme activity in the culture supernatant reached the highest level of 85 munits/ml after 96 h cultivation.

• Structural Engineering and Mechanics
• /
• 제38권3호
• /
• pp.333-347
• /
• 2011

This paper shows the solution for an orthotropic disk under the plane strain condition obtained with complex stress functions. These stress functions were induced by Lekhnitskii and expanded by one of the authors. Regarding diametrical compression test, the finite element method poses difficulties in representing the concentrated force because the specimens must be divided into finite elements during calculation. On the other hand, the method shown in this study can exactly represent this force. Some numerical results are shown and compared with those obtained under the plane stress condition for both stress and displacement. This comparison shows that the differences between the tensile stresses occurred under the plane strain condition and also that the differences under a plane stress condition increase as the orthotropy ratio increases for some cases.

• Geomechanics and Engineering
• /
• 제7권4호
• /
• pp.431-458
• /
• 2014

Construction of a new cavern close to an existing cavern will result in a modification of the state of stresses in a zone around the existing cavern as interaction between the twin caverns takes place. Extensive plane strain finite difference analyses were carried out to examine the deformations induced by excavation of underground twin caverns. From the numerical results, a fairly simple nonparametric regression algorithm known as multivariate adaptive regression splines (MARS) has been used to relate the maximum key point displacement and the percent strain to various parameters including the rock quality, the cavern geometry and the in situ stress. Probabilistic assessments on the serviceability limit state of twin caverns can be performed using the First-order reliability spreadsheet method (FORM) based on the built MARS model. Parametric studies indicate that the probability of failure $P_f$ increases as the coefficient of variation of Q increases, and $P_f$ decreases with the widening of the pillar.

• 한국축산식품학회지
• /
• 제42권6호
• /
• pp.996-1008
• /
• 2022

Lactic acid bacteria are representative probiotics that have beneficial effects on humans. Nineteen strains among the 167 single strains from kimchi was selected and their physiological features were investigated. The selection of a strain was based on strong enzyme (lipase, α-amylase, and α-glucosidase) inhibitory activities and anti-obesity effects in the adipocytes. For the final selection, the strain Lactiplantibacillus plantarum KC3 was tested for its potential as a starter. To assess its functionality, a freeze-dried culture of L. plantarum KC3 was administered to a diet-induced obese mouse model receiving a high-fat diet. The animal group administered with L. plantarum KC3 showed significant body weight loss during the 12-week feeding period compared to the high-fat control group. This study investigated the physiological characteristics of selected strain and evaluated its potential as an anti-obesity probiotic in mice.

• Wind and Structures
• /
• 제6권6호
• /
• pp.471-484
• /
• 2003

The rain-wind induced vibration of stays is a phenomenon discovered recently and not well explained yet. As it is influenced by a wide range of physical parameters (cable size and shape, wind speed, direction and turbulence, rain intensity, material repellency and roughness, cable weight, damping and pre-strain), this peculiar phenomenon is difficult to reproduce in laboratory controlled conditions. A successful wind tunnel experimental campaign, in which some basic physical quantities were measured, allowed an extensive analysis as to identify the parameters of the rain-wind induced excitation. The unsteady pressure field and water thickness around a cable model were measured under rainy-excited conditions. The knowledge of those parameters provided helpful information about the air-flow around the cable and allowed to clarify the physical phenomenon which produces the excitation.