• Journal of Biomedical Engineering Research
• /
• v.27 no.1
• /
• pp.14-21
• /
• 2006

As information technologies are developing, the improvement of the quality of life becomes worldwide issues. Especially, to improve the quality of life of a patient suffering intermittent diseases, in addition to the some portable equipments for measuring, analyzing, and notifying the status of the patients, methods of communication for seamless transmission of the measured data over to the remote site, such as an emergency center or a hospital, are required. In this paper, we address a seamless transmission of patient monitoring data such as ECG from a moving patient to a remote site, wherever the patient may be. We divide the whole environments into two wireless communication environments: an indoor one based on WLAN and an outdoor one based on CDMA cellular network in which the patient is assumed to move anywhere. We develop algorithms, implement them on a PDA-based hardware platform, and show some of the results for handover between the two environments in addition to the data transmission for each of the two environments.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.617-623
• /
• 2016

Recently, IoT technology has been applied to the control of appliances in the home, and information about temperature, humidity, etc. is collected and the application of the system to control the indoor environment automatically is increasing. Currently, the network configuration of IoT devices is mainly used to connect IoT devices to the Internet through wireless gateways. Since such a method is dependent on a gateway, there are limitations in providing various services. Therefore, this paper proposes an independent method of gateway by using IoT network without using gateway by applying long distance wireless communication technology. IoT devices using the proposed long distance wireless internet technology can connect to a remote server and provide mobility that can not be supported by existing methods, thereby providing more various services. The performance evaluation of the proposed network configuration method is compared with the delay time and the amount of data generated in the existing network method constituted by the gateway and the proposed network configuration method respectively. Experimental results show that the proposed method decreases the delay time and the amount of data generated by the gateway.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.133-137
• /
• 2016

Millimeter wave wireless communication systems, especially those targeting indoor high rate data transfer, have a strong requirement for high quality wireless link. Unfortunately, in this frequency band, the electromagnetic wave has to sustain the high propagation loss caused by the smaller wavelengths. In this scenario, beamforming technique, which enhances the link quality by focusing the radiation power on a direction, becomes one of the most important techniques in millimeter wave band wireless communication. In recent year, there been conducted many research on beamforming to improve the performance of wireless system. In this paper, we evaluate the performance of a simplified codebook-based beamforming scheme which is based on multiple-procedure and three-state beam selection. The simplified scheme significantly reduces beamforming setup time, comparing to the exhaustive searching, two-level searching adopted in IEEE 802.15.3c standard, and also conventional multi-level scheme.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.114-120
• /
• 2013

Recently, navigation systems based on wireless communication have been applied to the internal structures such as building or ship. If a stable azimuth information is obtained, these systems can effectively guide the direction of the user's progress through the information and then can improve the performance of guidance. Since conventional method which has acquired an azimuth information using geomagnetic and acceleration sensor(azimuth sensor hereafter) is sensitive to the effects of the magnetic field, it has unstable error range according to the surrounding environment. In order to improve these problems, this paper presents a new relative azimuth estimation algorithm using the displacement of a mobile node and its rotation angle based on Wireless communication. For the performance assessment of the proposed algorithm, experiments using rotating arm are performed and the results are confirmed that the proposed system can estimate the relative azimuth without using additional sensors.

• Journal of KIISE
• /
• v.42 no.2
• /
• pp.264-271
• /
• 2015

The general way to use a triangulation method is based on PTMP communication between an object and wireless modules in an environment, which is established by more than three wireless modules, to recognize the location of an object. Thus, this method has a problem that the PTMP-based system can only be applied in an environment where the wireless infra is already established. In order to solve this problem, the PTP communication schemes have been proposed but they are insufficient to generalize because they lack specific verification. In this paper, problems of an existed location estimation algorithm based on PTP communication are analyzed, and we propose a location estimation algorithm of a fixed object that satisfyies the condition of a single receiver being substituted to multiple receivers. A location estimation system we designed and implemented using CSS wireless communication modules to evaluate the proposed algorithm. We verify, by experimental results, that the optimum moving interval for the location estimation is 3m in indoor environment of $10m{\times}16m{\times}1m$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.991-998
• /
• 2010

In realization of wireless home network system using speech recognition in indoor voice recognition environment, background noise and reverberation are two main causes of digression in voice recognition system. In this study, the home network system resistant to reverberation and background noise using voice section detection method based on spectral entropy in indoor recognition environment is to be realized. Spectral subtraction can reduce the effect of reverberation and remove noise independent from voice signal by eliminating signal distorted by reverberation in spectrum. For effective spectral subtraction, the correct separation of voice section and silent section should be accompanied and for this, improvement of performance needs to be done, applying to voice section detection method based on entropy. In this study, experimental and indoor environment testing is carried out to figure out command recognition rate in indoor recognition environment. The test result shows that command recognition rate improved in static environment and reverberant room condition, using voice section detection method based on spectral entropy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2172-2178
• /
• 2007

In indoor environment, the combination of the two variations, large scale(path loss) and small scale(fading), leads to non-linear variation of RSSI(received signal strength indicator) values as distance varied. This has been one of the difficulties for indoor location estimation. This paper presents new findings on indoor RSSI characterization for more accurate model building. Experiments have been done statistically to find overall trend of RSSI values at different places and times within the same room. From experiments, it has been shown that the variation of RSSI values can be determined by both spatial and temporal factors. These two factors are directly indicated by the two main parameters of path loss model. The results show that all sensor nodes which are located at different places share the same characterization value for the temporal parameter whereas different values for the spatial parameters. The temporal parameter also has a large scale variation effect that is slowly time varying due to environmental changes. Using this relationship, the characterization for location estimation can be more efficient and accurate.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.265-271
• /
• 2023

Recently, location information services are gradually expanding due to the development of information and communication technology. RSSI is widely used to extract indoor and outdoor locations. The indoor and outdoor location estimation methods using RSSI are less accurate due to the influence of radio wave paths, interference, and surrounding wireless devices. In order to improve this problem, a distance estimation method that takes into account the wireless propagation environment is necessary. Therefore, in this study, we propose a distance estimation algorithm that takes into account the radio wave environment. The proposed method estimates the distance by learning RSSI input and output considering the RBF neural network and the propagation environment. To evaluate the performance of the proposed method, the performance of estimating the location of the receiver within a range of up to 55[m] using a BLE beacon transmitter and receiver was compared with the average filter and Kalman filter. As a result, the distance estimation accuracy of the proposed method was 6.7 times higher than that of the average filter and Kalman filter. As shown in the results of this performance evaluation, if the method of this study is applied to location services, more accurate location estimation will be possible.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.1
• /
• pp.35-39
• /
• 2008

In this paper, we have developed a propagation loss prediction software with GUI (Graphic User Interface) functions, based on the geometrical ray optics model, which can predict radio parameters for the deployment of wireless indoor network. The program has two numerical modules consisted with electrical image and ray launching methods to implement UTD theory. The simulated results are compared with reported data measured in the foreign building environments for office and '一' type corridor, and measured and simulated results for the propagation loss agree with each other quite well. Simulation results for '一' type corridor and 'T' type corridor propagation environment are shown for reference.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.20-30
• /
• 2019

A wide-band multiple-input multiple-output (MIMO) antenna with dual-band (2.4 and 5 GHz) operation is proposed for premium indoor access points (IAPs). Typically, an omni-directional pattern is used for dipole antennas and a directional radiation pattern is used for patch antennas. In this paper, both antenna types were used to compare their performance with that of the proposed $2{\times}2$ MIMO antenna. We simulated and measured the performance of the MIMO antenna, including the isolation, envelope correlation coefficient (ECC), mean effective gain (MEG) for the IAPs, and the throughput, in order to determine its communication quality. The performance of the antennas was analyzed according to the ECC and MEG. The proposed antenna has sufficient performance and excellent characteristics, making it suitable for IAPs. We analyzed the communication performance of wireless networks using the throughput data of a typical office environment. The network throughput of an 802.11n device was used for the comparison and was conducted according to the antenna type. The results showed that the values of the ECC, MEG, and the throughput have unique characteristics in terms of their directivity, antenna gains, isolation, etc. This paper also discusses the communication performance of various aspects of MIMO in multipath situations.