• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1115-1121
• /
• 2001

In this paper, we analyzed the performance of GFSK system that presence fading effect in indoor radio communication environments and impulsive electromagnetic noise from electronic equipments then we applied the Truncated Type- II Hybrid ARQ scheme to make satisfied in data transmission service. As a result, the system was influenced by fading and impulsive electromagnetic noise. Especially, the system was much degraded by high occurrence frequency and amplitude of impulsive electromagnetic noise than fading which has direct frequency. By adopting the Truncated Type-II hybrid ARQ technique we can also obtained the performance improvement in the low signal power(20 dB) arid over 24 dB in strong impulsive electromagnetic noise environment which is occurred error floor and terribly influenced by the system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.748-751
• /
• 2005

This paper introduces the testbed configuration for telematics wireless communications using terrestrial digital multimedia broadcasting (T-DMB) network. The testbed for telematics wireless communications is consisted of indoor laboratory testbed and outdoor field testbed. As a result of research, are derived testbed configurations for individual function verification at the indoor laboratory and performance test at the outdoor test road. In addition, a return channel configuration is described for interactive protocol as necessary for telematics services using T-DMB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1954-1959
• /
• 2006

In this paper, we proposed TH UWB-IR medical image transmission system using the IEEE an. 802.15.4a specification in WPAN environment. Also, we analyzed reception performance of wireless medical image transmission system in indoor multi-path fading environment using ITU-R M.1225 channel model. As a results, the proposed scheme can solve the problem of interference from the medical equipment in same frequency band, and minimize the loss due to the indoor multi-path fading environment. Therefore, the transmission with low power usage is possible.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.742-753
• /
• 2005

In this paper, we propose a rapid and reliable signal acquisition scheme for UWB (Ultra Wide Band) systems in typical indoor wireless channels. The proposed scheme is a two-step search with different thresholds and search window applied to a single correlator, where each step utilizes the single-dwell search with the bit reversal. Simulation results in IEEE 802. I5 Task Group .3a UWB indoor wireless channel show that the proposed scheme for the LHWB signals can achieve significant reduction of the required mean acquisition time as compared to the conventional single-dwell bit reversal search and double-dwell bit reversal search with more complex structure employing two correlators for various threshold levels. In addition, it is also observed that the proposed scheme can achieve much faster and reliable signal acquisition in noisy environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1348-1356
• /
• 2000

In this paper, we proposed a trellis coded Multi-Carrier CDMA 16 QAM system with multiple transmit/receive antenna diversity technique, which is simple and suitable for indoor wireless communications. The proposed multiple transmit/receive antenna diversity technique is that the transmitter sends a trellis coded Multi-Carrier CDMA 16 QAM signal from multiple transmitting antennas with intentional time delays, which makes a receiver possible to distinguish and combine the signals from different antennas. In wireless indoor communication system, if we allow the increase of the complexity of the system, it is also possible to achieve additional diversity gain in the performance with the combination of the proposed technique and the conventional receiving antenna diversity. Furthermore, we have found that the proposed trellis coded Multi-Carrier CDMA 16 QAM system, which employs multiple transmit/receive antenna, is less sensitive to the multiple user interference and fading than conventional receiving antenna diversity systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.807-810
• /
• 2007

Recently, ultra-wideband (UWB) technology based on the transmission of short duration pulses has gained much interest for its application to wireless communications. UWB small scale channel modeling work, including statistical characterization and potential models, are discussed. The significance, in terms of performance, of the channel impulse response model chosen for the simulation of UWB communications systems is also evaluated. Three traditional models are found to be useful for modeling NLOS UWB channels, but not LOS channels. In this paper, a new model for LOS UWB channels is presented and shown to represent LOS channels much more accurately than the traditional models.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.39-43
• /
• 2020

In this paper, we propose the multi-channel interference cancellation algorithm for visible light communication (VLC) in smart building. The VLC system is communication technology using visible rays that come out in Light Emitting Diode (LED) device. It has energy curtailment effect and possible to use in ubiquitous network service applications. When a large number of users communicate indoors, the performance can be reduced due to channel interference. To remove interference, at the first, the minimum mean square error (MMSE) scheme as interference cancellation methods used, and then the successive interference cancellation (SIC) is applied to obtain additional diversity gain and improve interference cancellation performance. Indoor VLC channel model is employed. The performance is evaluated in terms of bit error rate (BER). From the simulation results, it is confirmed that the proposed scheme has better BER performance compared to the previous systems. As a result, the proposed interference cancellation improves the signal quality of VLC systems by effectively removing the channel noise. The results of the paper can be applied to VLC for smart building and general communication systems.

• Journal of Environmental Health Sciences
• /
• v.43 no.5
• /
• pp.382-392
• /
• 2017

Objectives: The purpose of this study is to obtain basic data on the development of a risk communication model through an investigation of risk perception for radon and identify effective risk communication channels. Methods: A questionnaire was used to evaluate differences in perception level according to respective communication channels. A chi-squared test was used to analyze the difference in pre- and post-risk communication by communication channel. One-way ANOVA was used to analyze the difference in the radon risk perception rate for each communication channel. Results: All of the communication channels resulted in increased radon risk perception, but there was no statistical difference between them in terms of perception (p>0.05). However, based on previous findings that it is effective to use a multi-channel approach, it is considered that communication channels based on duplicate avenues is most appropriate. Conclusions: It is expected that this study will be used as basic data to better understand the formation of public opinion about radon risk and to understand the social reaction to each risk factor.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.341-348
• /
• 2022

Wi-Fi Sensing, which uses Wi-Fi technology to sense the surrounding environments, has strong potentials in a variety of sensing applications. Recently several advanced deep learning-based solutions using CSI (Channel State Information) data have achieved high performance, but it is still difficult to use in practice without explicit data collection, which requires expensive adaptation efforts for model retraining. In this study, we propose a Channel State Information Automatic Labeling System (CALS) that automatically collects and labels training CSI data for deep learning-based Wi-Fi sensing systems. The proposed system allows the CSI data collection process to efficiently collect labeled CSI for labeling for supervised learning using computer vision technologies such as object detection algorithms. We built a prototype of CALS to demonstrate its efficiency and collected data to train deep learning models for detecting the presence of a person in an indoor environment, showing to achieve an accuracy of over 90% with the auto-labeled data sets generated by CALS.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.136-150
• /
• 2010

Due to the effect of indoor coverage problem, the QoS of the indoor users will be degraded dramatically, with the number of indoor users. The femto cell is a popular solution for such problems. Since the price of the femto base station is usually cheap enough, one can sets up huge number of base stations in a small indoor area to reduce the size of communication cell. In this way, the QoS of the indoor users can be improved significantly. Moreover, the data rate can also be increased. However, how to decide an ideal transmitting power according to the surrounding radio environment is not a trivial problem, that still has not been addressed well. If the transmit power of femto base station is too large, the interference to the macro users will be increased. Conversely, if the transmit power of femto base station is too small; the coverage of femto base station will be reduced. To address this problem, we propose a power configuration method in femto base station using Genetic Algorithm by investigating a new fitness function. Furthermore, we adopt the weighted sum approach to improve the user performance in different modes. The simulation results show that the proposed power configuration method can not only improves the downlink SINR, but also enhance the channel capacity for both the Macro cell systems and Femto cell systems compared with some conventional methods.